HRESULT Play(DWORD dwReserved1, DWORD dwReserved2,
DWORD dwFlags);
Causes the sound buffer to play from the current position.
·Returns DS_OK if successful, or one of the following error values otherwise:
dwReserved1
This parameter is reserved. Its value must be 0.
dwReserved2
This parameter is reserved. Its value must be 0.
dwFlags
Flags specifying how to play the buffer. The following flag is defined:
Once the end of the audio buffer is reached, play restarts at the beginning of the buffer. Play continues until explicitly stopped. This flag must be set when playing primary sound buffers.
This method will cause a secondary sound buffer to be mixed into the primary buffer and sent to the sound device. If this is the first buffer to play, it will implicitly create a primary buffer and start playing that buffer; the application need not explicitly direct the primary buffer to play.
If the buffer specified in the method is already playing, the call to the method will succeed and the buffer will continue to play. However, the flags that define playback characteristics are superseded by the flags defined in the most recent call.
Primary buffers must be played with the DSBPLAY_LOOPING flag set.
This method will cause primary sound buffers to start playing to the sound device. If the application is set to the DSSCL_WRITEPRIMARY cooperative level, this will cause the audio data in the primary buffer to be sent to the sound device. However, if the application is set to any other cooperative level, this method will ensure that the primary buffer is playing even when no secondary buffers are playing; in that case, silence will be played. This can reduce processing overhead when sounds are started and stopped in sequence, because the primary buffer will be playing continuously rather than stopping and starting between secondary buffers.
Note Before this method can be called on any sound buffer, the application must call the IDirectSound::SetCooperativeLevel method and specify a cooperative level, typically DSSCL_NORMAL. If IDirectSound::SetCooperativeLevel has not been called, the IDirectSoundBuffer::Play method returns the DSERR_PRIOLEVELNEEDED error value.