IDirectInputDevice2::GetForceFeedbackState

The IDirectInputDevice2::GetForceFeedbackState method retrieves the state of the device's force feedback system.

HRESULT GetForceFeedbackState(

LPDWORD pdwOut

);

Parameters

pdwOut

Location for flags that describe the current state of the device's force feedback system.

The value is a combination of the following constants:

DIGFFS_ACTUATORSOFF

The device's force feedback actuators are disabled.

DIGFFS_ACTUATORSON

The device's force feedback actuators are enabled.

DIGFFS_DEVICELOST

The device suffered an unexpected failure and is in an indeterminate state. It must be reset either by unacquiring and reacquiring the device, or by sending a DISFFC_RESET command.

DIGFFS_EMPTY

The device has no downloaded effects.

DIGFFS_PAUSED

Playback of all active effects has been paused.

DIGFFS_POWEROFF

The force feedback system is not currently available. If the device cannot report the power state, then neither DIGFFS_POWERON nor DIGFFS_POWEROFF will be returned.

DIGFFS_POWERON

Power to the force feedback system is currently available. If the device cannot report the power state, then neither DIGFFS_POWERON nor DIGFFS_POWEROFF will be returned.

DIGFFS_SAFETYSWITCHOFF

The safety switch is currently off, meaning that the device cannot operate. If the device cannot report the state of the safety switch, then neither DIGFFS_SAFETYSWITCHON nor DIGFFS_SAFETYSWITCHOFF will be returned.

DIGFFS_SAFETYSWITCHON

The safety switch is currently on, meaning that the device can operate. If the device cannot report the state of the safety switch, then neither DIGFFS_SAFETYSWITCHON nor DIGFFS_SAFETYSWITCHOFF will be returned.

DIGFFS_STOPPED

No effects are playing and the device is not paused.

DIGFFS_USERFFSWITCHOFF

The user force feedback switch is currently off, meaning that the device cannot operate. If the device cannot report the state of the user force feedback switch, then neither DIGFFS_USERFFSWITCHON nor DIGFFS_USERFFSWITCHOFF will be returned.

DIGFFS_USERFFSWITCHON

The user force feedback switch is currently on, meaning that the device can operate. If the device cannot report the state of the user force feedback switch, then neither DIGFFS_USERFFSWITCHON nor DIGFFS_USERFFSWITCHOFF will be returned.

Future versions of DirectInput may define additional flags. Applications should ignore any flags that are not currently defined.

Return Values

If the method succeeds, the return value is DI_OK.

If the method fails, the return value may be one of the following error values:

Remarks

The device must be acquired at the exclusive cooperative level for this method to succeed.

QuickInfo

  Windows NT: Use version 5.0 or later.
  Windows: Use Windows 95 OSR2 or later. Available as a redistributable for Windows 95.
  Windows CE: Unsupported.
  Header: Declared in dinput.h.
  Import Library: Use dinput.lib.