DDSCAPS
The DDSCAPS structure defines the capabilities of a DirectDrawSurface object. This structure is part of the DDCAPS and DDSURFACEDESC structures.
typedef struct _DDSCAPS{
DWORD dwCaps;
} DDSCAPS, FAR* LPDDSCAPS;
Members
- dwCaps
- Capabilities of the surface. One or more of the following flags:
- DDSCAPS_3D
- Unsupported. Use the DDSCAPS_3DDEVICE instead.
- DDSCAPS_3DDEVICE
- Indicates that this surface can be used for 3-D rendering. Applications can use this flag to ensure that a device that can only render to a certain heap has off-screen surfaces allocated from the correct heap. If this flag is set for a heap, the surface is not allocated from that heap.
- DDSCAPS_ALLOCONLOAD
- Indicates that memory for the surface is not allocated until the surface is loaded by using the IDirect3DTexture2::Load.
- DDSCAPS_ALPHA
- Indicates that this surface contains alpha-only information.
- DDSCAPS_BACKBUFFER
- Indicates that this surface is the back buffer of a surface flipping structure. Typically, this capability is set by the CreateSurface method when the DDSCAPS_FLIP flag is used. Only the surface that immediately precedes the DDSCAPS_FRONTBUFFER surface has this capability set. The other surfaces are identified as back buffers by the presence of the DDSCAPS_FLIP flag, their attachment order, and the absence of the DDSCAPS_FRONTBUFFER and DDSCAPS_BACKBUFFER capabilities. If this capability is sent to the CreateSurface method, a stand-alone back buffer is being created. After this method is called, this surface could be attached to a front buffer, another back buffer, or both to form a flipping surface structure. For more information, see IDirectDrawSurface4::AddAttachedSurface. DirectDraw supports an arbitrary number of surfaces in a flipping structure.
- DDSCAPS_COMPLEX
- Indicates that a complex surface is being described. A complex surface results in the creation of more than one surface. The additional surfaces are attached to the root surface. The complex structure can be destroyed only by destroying the root.
- DDSCAPS_FLIP
- Indicates that this surface is a part of a surface flipping structure. When this capability is passed to the CreateSurface method, a front buffer and one or more back buffers are created. DirectDraw sets the DDSCAPS_FRONTBUFFER bit on the front-buffer surface and the DDSCAPS_BACKBUFFER bit on the surface adjacent to the front-buffer surface. The dwBackBufferCount member of the DDSURFACEDESC structure must be set to at least 1 in order for the method call to succeed. The DDSCAPS_COMPLEX capability must always be set when creating multiple surfaces by using the CreateSurface method.
- DDSCAPS_FRONTBUFFER
- Indicates that this surface is the front buffer of a surface flipping structure. This flag is typically set by the CreateSurface method when the DDSCAPS_FLIP capability is set. If this capability is sent to the CreateSurface method, a stand-alone front buffer is created. This surface will not have the DDSCAPS_FLIP capability. It can be attached to other back buffers to form a flipping structure by using IDirectDrawSurface4::AddAttachedSurface.
- DDSCAPS_HWCODEC
- Indicates that this surface should be able to have a stream decompressed to it by the hardware.
- DDSCAPS_LIVEVIDEO
- Indicates that this surface should be able to receive live video.
- DDSCAPS_LOCALVIDMEM
- Indicates that this surface exists in true, local video memory rather than non-local video memory. If this flag is specified then DDSCAPS_VIDEOMEMORY must be specified as well. This flag cannot be used with the DDSCAPS_NONLOCALVIDMEM flag.
- DDSCAPS_MIPMAP
- Indicates that this surface is one level of a mipmap. This surface will be attached to other DDSCAPS_MIPMAP surfaces to form the mipmap. This can be done explicitly by creating a number of surfaces and attaching them by using the IDirectDrawSurface4::AddAttachedSurface method, or implicitly by the CreateSurface method. If this capability is set, DDSCAPS_TEXTURE must also be set.
- DDSCAPS_MODEX
- Indicates that this surface is a 320×200 or 320×240 Mode X surface.
- DDSCAPS_NONLOCALVIDMEM
- Indicates that this surface exists in non-local video memory rather than true, local video memory. If this flag is specified, then DDSCAPS_VIDEOMEMORY flag must be specified as well. This cannot be used with the DDSCAPS_LOCALVIDMEM flag.
- DDSCAPS_OFFSCREENPLAIN
- Indicates that this surface is any off-screen surface that is not an overlay, texture, z-buffer, front-buffer, back-buffer, or alpha surface. It is used to identify plain surfaces.
- DDSCAPS_OPTIMIZED
- Not currently implemented.
- DDSCAPS_OVERLAY
- Indicates that this surface is an overlay. It may or may not be directly visible depending on whether it is currently being overlaid onto the primary surface. DDSCAPS_VISIBLE can be used to determine if it is being overlaid at the moment.
- DDSCAPS_OWNDC
- Indicates that this surface will have a device context (DC) association for a long period.
- DDSCAPS_PALETTE
- Indicates that this device driver allows unique DirectDrawPalette objects to be created and attached to this surface.
- DDSCAPS_PRIMARYSURFACE
- Indicates the surface is the primary surface. It represents what is visible to the user at the moment.
- DDSCAPS_PRIMARYSURFACELEFT
- Indicates that this surface is the primary surface for the left eye. It represents what is visible to the user's left eye at the moment. When this surface is created, the surface with the DDSCAPS_PRIMARYSURFACE capability represents what is seen by the user's right eye.
- DDSCAPS_STANDARDVGAMODE
- Indicates that this surface is a standard VGA mode surface, and not a Mode X surface. This flag cannot be used in combination with the DDSCAPS_MODEX flag.
- DDSCAPS_SYSTEMMEMORY
- Indicates that this surface memory was allocated in system memory.
- DDSCAPS_TEXTURE
- Indicates that this surface can be used as a 3-D texture. It does not indicate whether the surface is being used for that purpose.
- DDSCAPS_VIDEOMEMORY
- Indicates that this surface exists in display memory.
- DDSCAPS_VIDEOPORT
- Indicates that this surface can receive data from a video port.
- DDSCAPS_VISIBLE
- Indicates that changes made to this surface are immediately visible. It is always set for the primary surface, as well as for overlays while they are being overlaid and texture maps while they are being textured.
- DDSCAPS_WRITEONLY
- Indicates that only write access is permitted to the surface. Read access from the surface may generate a general protection (GP) fault, but the read results from this surface will not be meaningful.
- DDSCAPS_ZBUFFER
- Indicates that this surface is the z-buffer. The z-buffer contains information that cannot be displayed. Instead, it contains bit-depth information that is used to determine which pixels are visible and which are obscured.
Windows NT/2000: Requires Windows NT 4.0 SP3 or later.
Windows 95/98: Requires Windows 95 or later. Available as a redistributable for Windows 95.
Header: Declared in ddraw.h.