DIEFFECTINFO

The DIEFFECTINFO structure is used by the IDirectInputDevice7::EnumEffects and IDirectInputDevice7::GetEffectInfo methods to return information about a particular effect supported by a device.

typedef struct DIEFFECTINFO { 
    DWORD dwSize; 
    GUID guid; 
    DWORD dwEffType; 
    DWORD dwStaticParams;
    DWORD dwDynamicParams;
    TCHAR tszName[MAX_PATH]; 
} DIEFFECTINFO, *LPDIEFFECTINFO; 
 
typedef const DIEFFECTINFO  *LPCDIEFFECTINFO;

Members

dwSize

Size of the structure in bytes. During enumeration, the application can inspect this value to determine how many members of the structure are valid. This member must be initialized before the structure is passed to the IDirectInputDevice7::GetEffectInfo method.

guid

Identifier of the effect.

dwEffType

Zero or more of the following values:

DIEFT_ALL

Valid only for IDirectInputDevice7::EnumEffects. Enumerate all effects, regardless of type. This flag cannot be combined with any of the other flags.

DIEFT_CONDITION

The effect represents a condition. When creating or modifying a condition, the lpvTypeSpecificParams member of the DIEFFECT structure must point to an array of DICONDITION structures (one per axis), and the cbTypeSpecificParams member must be set to cAxis * sizeof(DICONDITION).

Not all devices support all the parameters of conditions. Check the effect capability flags to determine which capabilities are available.

The flag can be passed to IDirectInputDevice7::EnumEffects to restrict the enumeration to conditions.

DIEFT_CONSTANTFORCE

The effect represents a constant-force effect. When creating or modifying a constant-force effect, the lpvTypeSpecificParams member of the DIEFFECT must point to a DICONSTANTFORCE structure, and the cbTypeSpecificParams member must be set to sizeof(DICONSTANTFORCE).

The flag can be passed to IDirectInputDevice7::EnumEffects to restrict the enumeration to constant-force effects.

DIEFT_CUSTOMFORCE

The effect represents a custom-force effect. When creating or modifying a custom-force effect, the lpvTypeSpecificParams member of the DIEFFECT structure must point to a DICUSTOMFORCE structure, and the cbTypeSpecificParams member must be set to sizeof(DICUSTOMFORCE).

The flag can be passed to IDirectInputDevice7::EnumEffects to restrict the enumeration to custom-force effects.

DIEFT_DEADBAND

The effect generator for this condition effect supports the lDeadBand parameter.

DIEFT_FFATTACK

The effect generator for this effect supports the attack envelope parameter. If the effect generator does not support attack, the attack level and attack time parameters of the DIENVELOPE structure are ignored by the effect.

If neither DIEFT_FFATTACK nor DIEFT_FFFADE is set, the effect does not support an envelope, and any provided envelope is ignored.

DIEFT_FFFADE

The effect generator for this effect supports the fade parameter. If the effect generator does not support fade, the fade level and fade time parameters of the DIENVELOPE structure are ignored by the effect.

If neither DIEFT_FFATTACK nor DIEFT_FFFADE is set, the effect does not support an envelope, and any provided envelope is ignored.

DIEFT_HARDWARE

The effect represents a hardware-specific effect. For additional information on using a hardware-specific effect, consult the hardware documentation.

The flag can be passed to the IDirectInputDevice7::EnumEffects method to restrict the enumeration to hardware-specific effects.

DIEFT_PERIODIC

The effect represents a periodic effect. When creating or modifying a periodic effect, the lpvTypeSpecificParams member of the DIEFFECT structure must point to a DIPERIODIC structure, and the cbTypeSpecificParams member must be set to sizeof(DIPERIODIC).

The flag can be passed to IDirectInputDevice7::EnumEffects to restrict the enumeration to periodic effects.

DIEFT_POSNEGCOEFFICIENTS

The effect generator for this effect supports two coefficient values for conditions, one for the positive displacement of the axis and one for the negative displacement of the axis. If the device does not support both coefficients, the negative coefficient in the DICONDITION structure is ignored, and the positive coefficient is used in both directions.

DIEFT_POSNEGSATURATION

The effect generator for this effect supports a maximum saturation for both positive and negative force output. If the device does not support both saturation values, the negative saturation in the DICONDITION structure is ignored, and the positive saturation is used in both directions.

DIEFT_RAMPFORCE

The effect represents a ramp-force effect. When creating or modifying a ramp-force effect, the lpvTypeSpecificParams member of the DIEFFECT structure must point to a DIRAMPFORCE structure, and the cbTypeSpecificParams member must be set to sizeof(DIRAMPFORCE).

The flag can be passed to IDirectInputDevice7::EnumEffects to restrict the enumeration to ramp-force effects.

DIEFT_SATURATION

The effect generator for this effect supports the saturation of condition effects. If the effect generator does not support saturation, the force generated by a condition is limited only by the maximum force that the device can generate.

dwStaticParams

Zero or more DIEP_* values describing the parameters supported by the effect. For example, if DIEP_ENVELOPE is set, the effect supports an envelope. For a list of possible values, see IDirectInputEffect::GetParameters.

It is not an error for an application to attempt to use effect parameters that are not supported by the device. The unsupported parameters are ignored.

This information is provided to allow the application to tailor its use of force feedback to the capabilities of the specific device.

dwDynamicParams

Zero or more DIEP_* values denoting parameters of the effect that can be modified while the effect is playing. For a list of possible values, see IDirectInputEffect::GetParameters.

If an application attempts to change a parameter while the effect is playing and the driver does not support modifying that effect dynamically, the driver is permitted to stop the effect, update the parameters, then restart it. For more information, see IDirectInputEffect::SetParameters.

tszName[MAX_PATH]

Name of the effect; for example, "Sawtooth up" or "Constant force".

Remarks

Use the DIEFT_GETTYPE macro to extract the effect type from the dwEffType flags.

Requirements

  Windows NT/2000: Requires Windows 2000.
  Windows 95/98: Requires Windows 95 or later. Available as a redistributable for Windows 95.
  Header: Declared in dinput.h.