Diffuse Lighting
After adjusting the light intensity for any attenuation effects, Microsoft® Direct3D® computes how much of the remaining light reflects from a vertex, given the angle of the vertex normal and the direction of the incident light. Direct3D skips to this step for directional lights because they do not attenuate over distance.
The system considers two reflection types, diffuse and specular, and uses a different formula to determine how much light is reflected for each. After calculating the amounts of light reflected, Direct3D applies these new values to the diffuse and specular reflectance properties of the current material. The resulting color values are the diffuse and specular components that the rasterizer uses to produce Gouraud shading and specular highlighting.
Diffuse lighting is described by the following equation.
Diffuse Lighting = sum[Vd*Ld*(N.Ldir)*Atten*Spot]
The parameters are defined in the following table.
| Parameter | Default value |
Type | Description |
| sum | N/A |
N/A | Summation of each light's diffuse component. |
Vd | (0,0,0,0) |
D3DCOLORVALUE | Vertex diffuse color. |
| Ld | (0,0,0,0) |
D3DCOLORVALUE | Light diffuse color. |
| N | N/A |
D3DVECTOR | Vertex normal. |
| Ldir | (0,0,0,0) |
D3DCOLORVALUE | Direction vector from object vertex to the light. |
| Atten | (0,0,0,0) |
D3DCOLORVALUE | Light attenuation. |
| Spot | (0,0,0,0) |
D3DVECTOR | Characteristics of the spotlight cone. |
The value for Vd is one of three values: one of the two possible vertex colors in a vertex declaration, or the material diffuse color. The value is:
- vertex color1, if DIFFUSEMATERIALSOURCE = D3DMCS_COLOR1, and the first vertex color is supplied in the vertex declaration.
- vertex color2, if DIFFUSEMATERIALSOURCE = D3DMCS_COLOR2, and the second vertex color is supplied in the vertex declaration.
- material diffuse color
Note: If either DIFFUSEMATERIALSOURCE option is used, and the vertex color is not provided, the material diffuse color is used.
To calculate the attenuation (Atten) or the spotlight characteristics (Spot), see Attenuation and Spotlight Terms
Diffuse components are clamped to be from 0 to 255, after all lights are processed and interpolated separately. The resulting diffuse lighting value is a combination of the ambient, diffuse and emissive light values.
Example
In this example, the object is colored using the light diffuse color and a material diffuse color. The code is shown below.
D3DMATERIAL8 mtrl;
ZeroMemory( &mtrl, sizeof(D3DMATERIAL8) );
D3DLIGHT8 light;
ZeroMemory( &light, sizeof(D3DLIGHT8) );
light.Type = D3DLIGHT_DIRECTIONAL;
D3DXVECTOR3 vecDir;
vecDir = D3DXVECTOR3(0.5f, 0.0f, -0.5f);
D3DXVec3Normalize( (D3DXVECTOR3*)&light.Direction, &vecDir );
// set directional light diffuse color
light.Diffuse.r = 1.0f;
light.Diffuse.g = 1.0f;
light.Diffuse.b = 1.0f;
light.Diffuse.a = 1.0f;
m_pd3dDevice->SetLight( 0, &light );
m_pd3dDevice->LightEnable( 0, TRUE );
// if a material is used, SetRenderState must be used
// vertex color = light diffuse color * material diffuse color
mtrl.Diffuse.r = 0.75f;
mtrl.Diffuse.g = 0.0f;
mtrl.Diffuse.b = 0.0f;
mtrl.Diffuse.a = 0.0f;
m_pd3dDevice->SetMaterial( &mtrl );
m_pd3dDevice->SetRenderState(D3DRS_DIFFUSEMATERIALSOURCE, D3DMCS_MATERIAL);
According to the equation, the resulting color for the object vertices is a combination of the material color and the light color.
These two images show the material color, which is gray, and the light color, which is bright red.
The resulting scene is shown below. The only object in the scene is a sphere. The diffuse lighting calculation takes the material and light diffuse color and modifies it by the angle between the light direction and the vertex normal using the dot product. As a result, the backside of the sphere gets darker as the surface of the sphere curves away from the light.
Combining the diffuse lighting with the ambient lighting from the previous example shades the entire surface of the object. The ambient light shades the entire surface and the diffuse light helps reveal the object's three-dimensional (3-D) shape.
Diffuse lighting is more intensive to calculate than ambient lighting. Because it depends on the vertex normals and light direction, you can see the objects geometry in 3-D space, which produces a more realistic lighting than ambient lighting. You can use specular highlights to achieve a more realistic look.