A resident portionThe default MS-DOS shell, COMMAND.COM, is divided into three parts:
A resident portion
An initialization section
A transient module
The resident portion is loaded in lower memory, above the DOS kernel and its buffers and tables. It contains the routines to process Ctrl-C and Ctrl-Break, critical errors, and the termination (final exit) of other transient programs. This part of COMMAND.COM issues error messages and is responsible for the familiar prompt
Abort, Retry, Ignore?
The resident portion also contains the code required to reload the transient portion of COMMAND.COM when necessary.
The initialization section of COMMAND.COM is loaded above the resident portion when the system is started. It processes the AUTOEXEC.BAT batch file (the user's list of commands to execute at system startup), if one is present, and is then discarded.
The transient portion of COMMAND.COM is loaded at the high end of memory, and its memory can also be used for other purposes by application programs. The transient module issues the user prompt, reads the commands from the keyboard or batch file, and causes them to be executed. When an application program terminates, the resident portion of COMMAND.COM does a checksum of the transient module to determine whether it has been destroyed and fetches a fresh copy from the disk if necessary.
The user commands that are accepted by COMMAND.COM fall into three categories:
Internal commands
External commands
Batch files
Internal commands, sometimes called intrinsic commands, are those carried out by code embedded in COMMAND.COM itself. Commands in this category include COPY, REN(AME), DIR(ECTORY), and DEL(ETE). The routines for the internal commands are included in the transient part of COMMAND.COM.
External commands, sometimes called extrinsic commands or transient programs, are the names of programs stored in disk files. Before these programs can be executed, they must be loaded from the disk into the transient program area (TPA) of memory. (See "How MS-DOS Is Loaded" in this chapter.) Familiar examples of external commands are CHKDSK, BACKUP, and RESTORE. As soon as an external command has completed its work, it is discarded from memory; hence, it must be reloaded from disk each time it is invoked.
Batch files are text files that contain lists of other intrinsic, extrinsic, or batch commands. These files are processed by a special interpreter that is built into the transient portion of COMMAND.COM. The interpreter reads the batch file one line at a time and carries out each of the specified operations in order.
In order to interpret a user's command, COMMAND.COM first looks to see if the user typed the name of a built-in (intrinsic) command that it can carry out directly. If not, it searches for an external command (executable program file) or batch file by the same name. The search is carried out first in the current directory of the current disk drive and then in each of the directories specified in the most recent PATH command. In each directory inspected, COMMAND.COM first tries to find a file with the extension .COM, then .EXE, and finally .BAT. If the search fails for all three file types in all of the possible locations, COMMAND.COM displays the familiar message
Bad command or file name
If a .COM file or a .EXE file is found, COMMAND.COM uses the MS-DOS EXEC function to load and execute it. The EXEC function builds a special data structure called a program segment prefix (PSP) above the resident portion of COMMAND.COM in the transient program area. The PSP contains various linkages and pointers needed by the application program. Next, the EXEC function loads the program itself, just above the PSP, and performs any relocation that may be necessary. Finally, it sets up the registers appropriately and transfers control to the entry point for the program. (Both the PSP and the EXEC function will be discussed in more detail in Chapters 3 and 12.) When the transient program has finished its job, it calls a special MS-DOS termination function that releases the transient program's memory and returns control to the program that caused the transient program to be loaded (COMMAND.COM, in this case).
A transient program has nearly complete control of the system's resources while it is executing. The only other tasks that are accomplished are those performed by interrupt handlers (such as the keyboard input driver and the real-time clock) and operations that the transient program requests from the operating system. MS-DOS does not support sharing of the central processor among several tasks executing concurrently, nor can it wrest control away from a program when it crashes or executes for too long. Such capabilities are the province of MS OS/2, which is a protected-mode system with preemptive multitasking (time-slicing).