[disks]

[disks] ID = .,"Text_Description"

The [disks] section specifies the disk identifiers associated with each file in the information file. The section also maps each disk identifier to an installation disk, and to a specific directory on the installation disk.

Parameters

ID

Specifies a logical-disk identifier. It must be a single decimal digit (1–9), or uppercase letter (A-Z). No more than 35 identifiers are permitted. The logical-disk identifier zero (0) is reserved for use by the Setup program.

Text_Description

Specifies an ASCII string identifying the physical disk. Setup and Control Panel use this parameter to prompt the user to insert the appropriate disk before copying files. This parameter must be enclosed in double quotation marks (").

Comments

The period and comma (.,) immediately preceding the Text_Description parameter are required.

Example

This example defines two logical-disk identifiers: 1 and 2. Files associated with identifier 1 are in the root directory of the disk labelled “Disk #1.” Files associated with identifier 2 are in the root directory of the disk labelled “Disk #2.”

[disks]

1 =., "Disk #1"

2 =., "Disk #2"