Choosing the fGeneral button displays the fGeneral dialog box. This dialog
box contains four boxes which specify general rectangle-fill data. The following
illustration shows the fGeneral dialog box:
The following list provides a brief description of each.
| Box | Description |
| RF_WHITE_ABLE | If this box is checked, the printer supports a white-fill command; if this box is not checked, the printer does not support this command. |
| RF_MIN_IS_WHITE | If this box is checked, the minimum gray scale supported by the printer is actually white; if this box is not checked, the minimum gray scale contains black pels. |
| RF_CUR_X_END | If this box is checked, the cursor is aligned with the right edge of the rectangle after a rectangle-fill operation occurs. If this box is not checked, the cursor is positioned at the rectangle origin after the fill occurs. |
| RF_CUR_Y_END | If this box is checked, the cursor is aligned with the bottom edge of the rectangle after a rectangle-fill operation occurs. If this box is not checked, the cursor is positioned at the rectangle origin after the fill occurs. |
None of the boxes are checked.
The RF_WHITE_ABLE box is checked to indicate that the HP LaserJet IIP can use the White-fill command.