ID Number: Q71453
1.00
WINDOWS
Summary:
To use a Wacom HD-648A tablet with Windows for Pen Computing, you must
modify options on the hardware menu. The information below lists the
settings necessary for the tablet to be compatible with Pen Windows.
More Information:
Perform the following six steps to set up the tablet:
1. Activate the Wacom settings menu by gently resting the tip of the
pen against the screen and pressing the RESET button under the top
of the tablet.
The Wacom menu will appear with three choices:
PEN ADJ -- Adjust the arrow cursor with the tip of the pen
FUNC SET -- Main settings menu
JAP/ENG -- Japanese or English menus
2. Choose FUNC SET. Another menu appears:
TABLET | VIDEO | BACK LIGHT | MACRO | MAINTENANCE
3. Choose the TABLET menu and modify each of the parameters as
follows:
COMM = WACOMHD
FORMAT = BIN
MODE = STREAM
COORD = ABS
ALWAYS = DSB
BAUDRATE = 19200
PARITY = NONE
STOP BIT = 1
DATA BIT = 8
TRMNTR = CRLF
REPORT RATE = 100
MM/INCH = INCH
BUZZER = OFF
ORIGIN = UPPER LEFT
DSR = DSB
4. Choose the VIDEO menu and modify each of the parameters as follows:
RGB SIGNAL = G (disregard R and B)
DISPLAY MODE = POS
MODEL = PS/2
5. Choose the BACK LIGHT menu and modify each of the parameters as
follows:
AUTO LIGHT OFF TIME = 5min
BRIGHT ON LIGHT OFF = 10%
6. Choose the MAINTENANCE menu and modify each of the parameters as
follows:
HORIZON = 45
VERTICAL = 33
PLL.CNT = 94
DOTDLCOK = DOWN
ANALOG RGB LEVEL
R = 18
G = 18
B = 18
After making these changes, if the video output is not satisfactory,
modify the parameters on the VIDEO and MAINTENANCE menus to fine tune
the output for your machine.
Additional reference words: 1.00