ID Number: Q39439
5.00 | 5.10
MS-DOS | OS/2
docerr buglist5.00
Summary:
The ".286" and ".386" operands do not allow the following to assemble:
SMSW, SGDT, SIDT, SLDT, VERR, and VERW
One or two error messages are generated for each occurrence of these
instructions.
Microsoft has confirmed this to be a problem in Version 5.00. We are
researching this problem and will post new information as it becomes
available.
More Information:
Page 412 (section 20.3) of the "Microsoft Macro Assembler Programmer's
Guide" is incorrect in saying that these instructions require
"privileged mode." Also, SMSW is spelled incorrectly (as "SMCW").
These instructions are allowed in all modes; however, behavior may
differ between real and protected modes.
The reference guide is also incorrect on several addressing points.
See the Intel "80286 and 80287 Programmer's Reference Manual" for more
information.
The following is a sample program:
........................................................................
; The following program demonstrates :
dosseg
.286
.model large
.data
table dw 64 dup (?)
.code
start:
SMSW ax
SGDT table
SIDT table
SLDT ax
VERR ax
VERW ax
end start
......................................................................
C> masm test,,,;
Microsoft Ò Macro Assembler Version 5.10
Copyright Ó Microsoft Corp 1981, 1988. All rights reserved.
test.ASM(6): error A2105: Expected: instruction, directive, or label
test.ASM(7): error A2105: Expected: instruction, directive, or label
test.ASM(8): error A2105: Expected: instruction, directive, or label
test.ASM(9): error A2105: Expected: instruction, directive, or label
test.ASM(10): error A2105: Expected: instruction, directive, or label
test.ASM(11): error A2105: Expected: instruction, directive, or label
24002 Bytes symbol space free
0 Warning Errors
6 Severe Errors
.......................................................................