ID Number: Q80861
2.00 2.10 | 2.00 2.10
MS-DOS | OS/2
Summary:
Tandy Corporation offers the following three Ethernet Adapters:
Tandy Ethernet Plus
Tandy Ethernet Plus 16
Tandy Ethernet Plus 16 TP
These adapters are actually manufactured by Western Digital
Corporation and correspond to the following cards:
WD EtherCard Plus WD8003E
WD EtherCard Plus 16 WD8013E
WD EtherCard Plus 16 WD8013E TP
The MACWD driver included with LAN Manager should work correctly with
these Tandy cards. Choose Western Digital's Ethercard+WD8003E as your
network adapter in LAN Manager Setup. Non-default settings for
interrupt and I/O base address must be made to the PROTOCOL.INI file
(as you would make for the Western Digital cards).
Note: The WD EtherCard Plus 16 and the WD EtherCard Plus 16 TP are not
currently certified network cards for LAN Manager; therefore, the
Tandy Ethernet Plus 16 and the Tandy Ethernet Plus 16 TP cannot be
considered certified. If the 16-bit Western Digital cards become
certified in the future, the same drivers should work correctly with
the corresponding Tandy 16-bit cards.
Additional reference words: 2.0 2.00 2.1 2.10 Radio Shack