C 6.00 README: 43-Line Mode with DOS 4.01 ANSI.SYS

ID Number: Q61238

6.00 | 6.00

MS-DOS | OS/2

Summary:

The following information is taken from the C version 6.00 README.DOC

file.

43-Line Mode with DOS 4.01 ANSI.SYS

-----------------------------------

You may experience problems trying to switch CodeView or the

Programmer's WorkBench (PWB) to 43-line mode if you are using DOS 4.01

and ANSI.SYS.

To use Codeview or PWB in 43-line mode in this situation, switch to

43-line mode using the MODE command (MODE CO80,43) before you invoke

the program.

This problem also affects the graphics functions _settextrows and

_setvideomoderows. Under DOS 4.01 with ANSI.SYS installed, using these

functions to set 43-line mode may cause unexpected behavior.

At the moment, the only known solution is to remove ANSI.SYS from your

CONFIG.SYS file and reboot your machine.