| EPT_S_CANT_PERFORM_OP 1752L |
|
| |
The operation cannot be performed. |
| EPT_S_INVALID_ENTRY 1751L |
|
| |
The entry is invalid. |
| EPT_S_NOT_REGISTERED 1753L |
|
| |
There are no more endpoints available from the endpoint mapper. |
| ERROR_ACCESS_DENIED 5L |
|
| |
Access Denied. |
| ERROR_ACCOUNT_DISABLED 1331L |
|
| |
The referenced account is currently disabled and may not be logged on to. |
| ERROR_ACCOUNT_RESTRICTION 1327L |
|
| |
Indicates a referenced user name and authentication information are valid, but some user account restriction has prevented successful authentication (such as time-of-day restrictions). |
| ERROR_ADAP_HDW_ERR 57L |
|
| |
A network adapter hardware error occurred. |
| ERROR_ALIAS_EXISTS 1379L |
|
| |
The specified alias already exists. |
| ERROR_ALLOTTED_SPACE_EXCEEDED 1344L |
|
| |
When a block of memory is allotted for future updates, such as the memory allocated to hold discretionary access control and primary group information, successive updates may exceed the amount of memory originally allotted. Since quota may already have been charged to several processes which have handles to the object, it is not reasonable to alter the size of the allocated memory. Instead, a request that requires more memory than has been allotted must fail and the ERROR_ALLOTED_SPACE_EXCEEDED error returned. |
| ERROR_ALREADY_ASSIGNED 85L |
|
| |
The local device name is already in use. |
| ERROR_ALREADY_EXISTS 183L |
|
| |
Attempt to create file that already exists. |
| ERROR_ARENA_TRASHED 7L |
|
| |
The storage control blocks were destroyed. |
| ERROR_ARITHMETIC_OVERFLOW 534L |
|
| |
Arithmetic result exceeded 32-bits. |
| ERROR_ATOMIC_LOCKS_NOT_SUPPORTED 174L |
|
| |
The file system does not supporting atomic changing of the lock type. |
| ERROR_AUTODATASEG_EXCEEDS_64k 199L |
|
| |
The operating system cannot run this application program. |
| ERROR_BAD_ARGUMENTS 160L |
|
| |
The argument string passed to DosExecPgm is not correct. |
| ERROR_BAD_COMMAND 22L |
|
| |
The device does not recognize the command. |
| ERROR_BAD_DESCRIPTOR_FORMAT 1361L |
|
| |
Indicates a security descriptor is not in the necessary format (absolute or self-relative). |
| ERROR_BAD_DEV_TYPE 66L |
|
| |
The network resource type is not correct. |
| ERROR_BAD_DEVICE 1200L |
|
| |
The specified device name is invalid. |
| ERROR_BAD_DRIVER_LEVEL 119L |
|
| |
The system does not support the command requested. |
| ERROR_BAD_ENVIRONMENT 10L |
|
| |
The environment is incorrect. |
| ERROR_BAD_EXE_FORMAT 193L |
|
| |
%1 is not a valid Windows application. |
| ERROR_BAD_FORMAT 11L |
|
| |
An attempt was made to load a program with an incorrect format. |
| ERROR_BAD_IMPERSONATION_LEVEL 1346L |
|
| |
A specified impersonation level is invalid. Also used to indicate a required impersonation level was not provided. |
| ERROR_BAD_INHERITANCE_ACL 1340L |
|
| |
Indicates that an attempt to build either an inherited ACL or ACE was not successful. This can be caused by a number of things. One of the more probable causes is the replacement of a CreatorId with an SID that didn't fit into the ACE or ACL. |
| ERROR_BAD_LENGTH 24L |
|
| |
The program issued a command but the command length is incorrect. |
| ERROR_BAD_LOGON_SESSION_STATE 1365L |
|
| |
The logon session is not in a state the is consistent with the requested operation. |
| ERROR_BAD_NET_NAME 67L |
|
| |
The network name cannot be found. |
| ERROR_BAD_NET_RESP 58L |
|
| |
The specified server cannot perform the requested operation. |
| ERROR_BAD_NETPATH 53L |
|
| |
The network path was not found. |
| ERROR_BAD_PATHNAME 161L |
|
| |
Invalid path name specified. |
| ERROR_BAD_PIPE 230L |
|
| |
Invalid pipe state. |
| ERROR_BAD_PROFILE 1206L |
|
| |
The network connection profile is corrupt. |
| ERROR_BAD_PROVIDER 1204L |
|
| |
The specified network provider name is invalid. |
| ERROR_BAD_REM_ADAP 60L |
|
| |
The remote adapter is not compatible. |
| ERROR_BAD_THREADID_ADDR 159L |
|
| |
The address for the thread ID is not correct. |
| ERROR_BAD_TOKEN_TYPE 1349L |
|
| |
The type of a token object is inappropriate for its attempted use. |
| ERROR_BAD_UNIT 20L |
|
| |
The system cannot find the device specified. |
| ERROR_BAD_USERNAME 2202L |
|
| |
The specified user name is invalid. |
| ERROR_BAD_VALIDATION_CLASS 1348L |
|
| |
The validation information class requested was invalid. |
| ERROR_BADDB 1009L |
|
| |
The configuration registry database is corrupt. |
| ERROR_BADKEY 1010L |
|
| |
The configuration registry key is invalid. |
| ERROR_BROKEN_PIPE 109L |
|
| |
The pipe has been ended. |
| ERROR_BUFFER_OVERFLOW 111L |
|
| |
The file name is too long. |
| ERROR_BUSY 170L |
|
| |
The requested resource is in use. |
| ERROR_BUSY_DRIVE 142L |
|
| |
The system cannot perform a JOIN or SUBST at this time. |
| ERROR_CALL_NOT_IMPLEMENTED 120L |
|
| |
The Application Program Interface (API) entered will only work in Windows/NT mode. |
| ERROR_CAN_NOT_COMPLETE 1003L |
|
| |
Cannot complete function for some reason. Like calling GetSelection() when there is no selection. |
| ERROR_CANCEL_VIOLATION 173L |
|
| |
A lock request was not outstanding for the supplied cancel region. |
| ERROR_CANNOT_COPY 266L |
|
| |
The Copy API cannot be used. |
| ERROR_CANNOT_FIND_WND_CLASS 1407L |
|
| |
Cannot find window class. |
| ERROR_CANNOT_IMPERSONATE 1368L |
|
| |
Indicates that an attempt has been made to impersonate via a named pipe that has not yet been read from. |
| ERROR_CANNOT_MAKE 82L |
|
| |
The directory or file cannot be created. |
| ERROR_CANNOT_OPEN_PROFILE 1205L |
|
| |
Unable to open the network connection profile. |
| ERROR_CANT_ACCESS_DOMAIN_INFO 1351L |
|
| |
Indicates a domain controller could not be contacted or that objects within the domain are protected such that necessary information could not be retrieved. |
| ERROR_CANT_DISABLE_MANDATORY 1310L |
|
| |
A mandatory group may not be disabled. |
| ERROR_CANT_OPEN_ANONYMOUS 1347L |
|
| |
An attempt was made to open an Anonymous level token. Anonymous tokens may not be opened. |
| ERROR_CANTOPEN 1011L |
|
| |
The configuration registry key could not be opened. |
| ERROR_CANTREAD 1012L |
|
| |
The configuration registry key could not be read. |
| ERROR_CANTWRITE 1013L |
|
| |
The configuration registry key could not be written. |
| ERROR_CHILD_MUST_BE_VOLATILE 1021L |
|
| |
An attempt was made to create a Stable subkey under a Volatile parent key. |
| ERROR_CHILD_NOT_COMPLETE 129L |
|
| |
The %1 application cannot be run in Windows mode. |
| ERROR_CHILD_WINDOW_MENU 1436L |
|
| |
Child windows can't have menus. |
| ERROR_CLASS_ALREADY_EXISTS 1410L |
|
| |
Class already exists. |
| ERROR_CLASS_DOES_NOT_EXIST 1411L |
|
| |
Class does not exist. |
| ERROR_CLASS_HAS_WINDOWS 1412L |
|
| |
Class still has open windows. |
| ERROR_CLIPBOARD_NOT_OPEN 1418L |
|
| |
Thread doesn't have clipboard open. |
| ERROR_CONNECTION_UNAVAIL 1201L |
|
| |
The device is not currently connected but it is a remembered connection. |
| ERROR_CONTROL_ID_NOT_FOUND 1421L |
|
| |
Control ID not found. |
| ERROR_CRC 23L |
|
| |
Data error (cyclic redundancy check) |
| ERROR_CURRENT_DIRECTORY 16L |
|
| |
The directory cannot be removed. |
| ERROR_DC_NOT_FOUND 1425L |
|
| |
Invalid HDC passed to ReleaseDC. |
| ERROR_DESTROY_OBJECT_OF_OTHER_THREAD 1435L |
|
| |
Cannot destroy object created by another thread. |
| ERROR_DEV_NOT_EXIST 55L |
|
| |
The specified network resource is no longer available. |
| ERROR_DEVICE_ALREADY_REMEMBERED 1202L |
|
| |
An attempt was made to remember a device that had previously been remembered. |
| ERROR_DEVICE_IN_USE 2404L |
|
| |
The device is in use by an active process and cannot be disconnected. |
| ERROR_DEVICE_NOT_PARTITIONED 1107L |
|
| |
Tape partition information could not be found when loading a tape. |
| ERROR_DIR_NOT_EMPTY 145L |
|
| |
The directory is not empty. |
| ERROR_DIR_NOT_ROOT 144L |
|
| |
The directory is not a subdirectory of the root directory. |
| ERROR_DIRECT_ACCESS_HANDLE 130L |
|
| |
BUGBUG – message text missing. |
| ERROR_DIRECTORY 267L |
|
| |
Invalid directory name. |
| ERROR_DISCARDED 157L |
|
| |
The segment is already discarded and cannot be locked. |
| ERROR_DISK_CHANGE 107L |
|
| |
Program stopped because alternate diskette was not inserted. |
| ERROR_DISK_CORRUPT 1393L |
|
| |
The disk structure is corrupt and non-readable. |
| ERROR_DISK_FULL 112L |
|
| |
There is not enough space on the disk. |
| ERROR_DLL_INIT_FAILED 1114L |
|
| |
A DLL initialization routine failed. |
| ERROR_DOMAIN_EXISTS 1356L |
|
| |
The specified Domain already exists. |
| ERROR_DOMAIN_LIMIT_EXCEEDED 1357L |
|
| |
An attempt to exceed the limit on the number of domains per server for this release. |
| ERROR_DRIVE_LOCKED 108L |
|
| |
The disk is in use or locked by another process. |
| ERROR_DUP_NAME 52L |
|
| |
A duplicate name exists on the network. |
| ERROR_DYNLINK_FROM_INVALID_RING 196L |
|
| |
The operating system cannot run this application program. |
| ERROR_EA_ACCESS_DENIED 994L |
|
| |
Access to the EA was denied. |
| ERROR_EA_FILE_CORRUPT 276L |
|
| |
The EA file on the mounted file system is corrupt. |
| ERROR_EA_LIST_INCONSISTENT 255L |
|
| |
The EAs are inconsistent. |
| ERROR_EA_TABLE_FULL 277L |
|
| |
The EA table in the EA file on the mounted file system is full. |
| ERROR_EAS_DIDNT_FIT 275L |
|
| |
The EAs did not fit in the buffer. |
| ERROR_EAS_NOT_SUPPORTED 282L |
|
| |
The mounted file system does not support extended attributes. |
| ERROR_END_OF_MEDIA 1100L |
|
| |
End of tape mark has been reached during an operation. |
| ERROR_ENVVAR_NOT_FOUND 203L |
|
| |
The system could not find the environment option that was entered. |
| ERROR_EVENTLOG_FILE_CORRUPT 1500L |
|
| |
One of the Eventlog logfiles has been corrupted. |
| ERROR_EXCL_SEM_ALREADY_OWNED 101L |
|
| |
The exclusive semaphore is owned by another process. |
| ERROR_EXE_MARKED_INVALID 192L |
|
| |
The operating system cannot run %1. |
| ERROR_EXTENDED_ERROR 1208L |
|
| |
An extended error has occurred. |
| ERROR_FAIL_I24 83L |
|
| |
Fail on INT 24 |
| ERROR_FILE_CORRUPT 1392L |
|
| |
The file or directory is corrupt and non-readable. |
| ERROR_FILE_EXISTS 80L |
|
| |
The file exists. |
| ERROR_FILE_INVALID 1006L |
|
| |
The volume for a file has been externally altered such that the opened file is no longer valid. |
| ERROR_FILE_NOT_FOUND 2L |
|
| |
The system cannot find the file specified. |
| ERROR_FILENAME_EXCED_RANGE 206L |
|
| |
The file name or extension is too long. |
| ERROR_FULLSCREEN_MODE 1007L |
|
| |
The requested operation cannot be performed in fullscreen mode. |
| ERROR_GEN_FAILURE 31L |
|
| |
A device attached to the system is not functioning. |
| ERROR_GENERIC_NOT_MAPPED 1360L |
|
| |
Indicates generic access types were contained in an access mask which should already be mapped to non-generic access types. |
| ERROR_GLOBAL_ONLY_HOOK 1429L |
|
| |
This hook can only be set globally. |
| ERROR_GROUP_EXISTS 1318L |
|
| |
The specified group already exists. |
| ERROR_HANDLE_DISK_FULL 39L |
|
| |
The disk is full. |
| ERROR_HANDLE_EOF 38L |
|
| |
Reached End of File. |
| ERROR_HOOK_NEEDS_HMOD 1428L |
|
| |
Cannot set non-local hook without an module handle. |
| ERROR_HOOK_NOT_INSTALLED 1431L |
|
| |
Hook not installed. |
| ERROR_HOTKEY_ALREADY_REGISTERED 1409L |
|
| |
Hotkey already registered. |
| ERROR_HOTKEY_NOT_REGISTERED 1419L |
|
| |
Hotkey not registered. |
| ERROR_HWNDS_HAVE_DIFFERENT_PARENT 1441L |
|
| |
All DeferWindowPos() HWNDs must have same parent. |
| ERROR_ILL_FORMED_PASSWORD 1324L |
|
| |
When trying to update a password, this return status indicates that the value provided for the new password contains values that are not allowed in passwords. |
| ERROR_INFLOOP_IN_RELOC_CHAIN 202L |
|
| |
The operating system cannot run %1. |
| ERROR_INSUFFICIENT_BUFFER 122L |
|
| |
The data area passed to a system call is too small. |
| ERROR_INTERNAL_DB_CORRUPTION 1358L |
|
| |
This error indicates that the requested operation cannot be completed due to a catastrophic media failure or on-disk data structure corruption |
| ERROR_INTERNAL_DB_ERROR 1383L |
|
| |
The Local Security Authority (LSA) database contains in internal inconsistency. |
| ERROR_INTERNAL_ERROR 1359L |
|
| |
This error indicates that the SAM server has encounterred an internal consistency error in its database. This catastrophic failure will prevent further operation of SAM |
| ERROR_INVALID_ACCEL_HANDLE 1403L |
|
| |
Invalid accelerator-table handle. |
| ERROR_INVALID_ACCESS 12L |
|
| |
The access code is invalid. |
| ERROR_INVALID_ACCOUNT_NAME 1315L |
|
| |
The name provided is not a properly formed account name. |
| ERROR_INVALID_ACL 1336L |
|
| |
Indicates the ACL structure is not valid. |
| ERROR_INVALID_ADDRESS 487L |
|
| |
Attempt to access invalid address. |
| ERROR_INVALID_AT_INTERRUPT_TIME 104L |
|
| |
Cannot request exclusive semaphores at interrupt time. |
| ERROR_INVALID_BLOCK 9L |
|
| |
The storage control block address is invalid. |
| ERROR_INVALID_BLOCK_LENGTH 1106L |
|
| |
When accessing a new tape of a multivolume partition, the current blocksize is incorrect. |
| ERROR_INVALID_CATEGORY 117L |
|
| |
The IOCTL call made by the application program is not correct. |
| ERROR_INVALID_COMBOBOX_MESSAGE 1422L |
|
| |
Invalid Message, combobox doesn't have an edit control. |
| ERROR_INVALID_CURSOR_HANDLE 1402L |
|
| |
Invalid cursor handle. |
| ERROR_INVALID_DATA 13L |
|
| |
The data is invalid. |
| ERROR_INVALID_DOMAIN_ROLE 1354L |
|
| |
Indicates the desired operation cannot be completed with the domain in its present role. |
| ERROR_INVALID_DOMAIN_STATE 1353L |
|
| |
Indicates the Domain was in the wrong state to perform the desired operation. |
| ERROR_INVALID_DRIVE 15L |
|
| |
The system cannot find the drive specified. |
| ERROR_INVALID_DWP_HANDLE 1405L |
|
| |
Invalid DeferWindowPos handle. |
| ERROR_INVALID_EA_HANDLE 278L |
|
| |
The EA handle specified is invalid. |
| ERROR_INVALID_EA_NAME 254L |
|
| |
The specified EA name was invalid. |
| ERROR_INVALID_EDIT_HEIGHT 1424L |
|
| |
Height must be less than 256. |
| ERROR_INVALID_EVENT_COUNT 151L |
|
| |
The number of specified semaphore events for DosMuxSemWait is not correct. |
| ERROR_INVALID_EXE_SIGNATURE 191L |
|
| |
%1 cannot be run in Windows/NT mode. |
| ERROR_INVALID_FILTER_PROC 1427L |
|
| |
Invalid filter proc. |
| ERROR_INVALID_FLAG_NUMBER 186L |
|
| |
The flag passed is not correct. |
| ERROR_INVALID_FLAGS 1004L |
|
| |
Invalid flags. |
| ERROR_INVALID_FUNCTION 1L |
|
| |
Incorrect function |
| ERROR_INVALID_GROUP_ATTRIBUTES 1345L |
|
| |
The specified attributes are invalid, or incompatible with the attributes for the group as a whole. |
| ERROR_INVALID_GW_COMMAND 1443L |
|
| |
Invalid GW_* command. |
| ERROR_INVALID_HANDLE 6L |
|
| |
Incorrect internal file identifier. |
| ERROR_INVALID_HOOK_FILTER 1426L |
|
| |
Invalid hook filter type. |
| ERROR_INVALID_HOOK_HANDLE 1404L |
|
| |
Invalid hook handle. |
| ERROR_INVALID_ICON_HANDLE 1414L |
|
| |
Invalid icon handle. |
| ERROR_INVALID_ID_AUTHORITY 1343L |
|
| |
The value provided was an invalid value for an identifier authority. |
| ERROR_INVALID_INDEX 1413L |
|
| |
Invalid index. |
| ERROR_INVALID_LB_MESSAGE 1432L |
|
| |
Invalid message for single-selection listbox. |
| ERROR_INVALID_LEVEL 124L |
|
| |
The system call level is not correct. |
| ERROR_INVALID_LIST_FORMAT 153L |
|
| |
The DosMuxSemWait list is not correct. |
| ERROR_INVALID_LOGON_HOURS 1328L |
|
| |
The user account has time restrictions and may not be logged onto at this time. |
| ERROR_INVALID_LOGON_TYPE 1367L |
|
| |
Indicates an invalid value has been provided for LogonType has been requested. |
| ERROR_INVALID_MEMBER 1388L |
|
| |
A new member could not be added to an alias because the member has the wrong account type. |
| ERROR_INVALID_MENU_HANDLE 1401L |
|
| |
Invalid menu handle. |
| ERROR_INVALID_MESSAGE 1002L |
|
| |
Window can't handle sent message. |
| ERROR_INVALID_MINALLOCSIZE 195L |
|
| |
The operating system cannot run %1. |
| ERROR_INVALID_MODULETYPE 190L |
|
| |
The operating system cannot run %1. |
| ERROR_INVALID_MSGBOX_STYLE 1438L |
|
| |
Invalid message box style. |
| ERROR_INVALID_NAME 123L |
|
| |
The file name, directory name, or volume label is not syntactically correct. |
| ERROR_INVALID_ORDINAL 182L |
|
| |
The operating system cannot run %1. |
| ERROR_INVALID_OWNER 1307L |
|
| |
Indicates a particular Security ID may not be assigned as the owner of an object. |
| ERROR_INVALID_PARAMETER 87L |
|
| |
The parameter is incorrect. |
| ERROR_INVALID_PASSWORD 86L |
|
| |
The specified network password is not correct. |
| ERROR_INVALID_PRIMARY_GROUP 1308L |
|
| |
Indicates a particular Security ID may not be assigned as the primary group of an object. |
| ERROR_INVALID_SCROLLBAR_RANGE 1448L |
|
| |
Scrollbar range greater than 0x7FFF. |
| ERROR_INVALID_SECURITY_DESCR 1338L |
|
| |
Indicates the SECURITY_DESCRIPTOR structure is not valid. |
| ERROR_INVALID_SEGDPL 198L |
|
| |
The operating system cannot run %1. |
| ERROR_INVALID_SEGMENT_NUMBER 180L |
|
| |
The system detected a segment number that was not correct. |
| ERROR_INVALID_SERVER_STATE 1352L |
|
| |
Indicates the Sam Server was in the wrong state to perform the desired operation. |
| ERROR_INVALID_SHOWWIN_COMMAND 1449L |
|
| |
Invalid ShowWindow() command. |
| ERROR_INVALID_SID 1337L |
|
| |
Indicates the SID structure is not valid. |
| ERROR_INVALID_SIGNAL_NUMBER 209L |
|
| |
The signal being posted is not correct. |
| ERROR_INVALID_SPI_VALUE 1439L |
|
| |
Invalid SPI_* parameter. |
| ERROR_INVALID_STACKSEG 189L |
|
| |
The operating system cannot run %1. |
| ERROR_INVALID_STARTING_CODESEG 188L |
|
| |
The operating system cannot run %1. |
| ERROR_INVALID_SUB_AUTHORITY 1335L |
|
| |
Indicates the sub-authority value is invalid for the particular use. |
| ERROR_INVALID_TARGET_HANDLE 114L |
|
| |
The target internal file identifier is incorrect. |
| ERROR_INVALID_THREAD_ID 1444L |
|
| |
Invalid thread ID. |
| ERROR_INVALID_USER_BUFFER 1784L |
|
| |
The supplied user buffer is not valid for the requested operation. |
| ERROR_INVALID_VERIFY_SWITCH 118L |
|
| |
The verify-on-write switch parameter value is not correct. |
| ERROR_INVALID_WINDOW_HANDLE 1400L |
|
| |
Invalid window handle. |
| ERROR_INVALID_WORKSTATION 1329L |
|
| |
The user account is restricted such that it may not be used to log on from the source workstation. |
| ERROR_IO_DEVICE 1117L |
|
| |
The request could not be performed because of an I/O device error. |
| ERROR_IO_INCOMPLETE 996L |
|
| |
Overlapped IO event not in signalled state. |
| ERROR_IO_PENDING 997L |
|
| |
Overlapped IO operation in progress. |
| ERROR_IOPL_NOT_ENABLED 197L |
|
| |
The operating system is not presently configured to run this application. |
| ERROR_IS_JOIN_PATH 147L |
|
| |
Not enough resources are available to process this command. |
| ERROR_IS_JOIN_TARGET 133L |
|
| |
A JOIN or SUBST command cannot be used for a drive that contains previously joined drives. |
| ERROR_IS_JOINED 134L |
|
| |
An attempt was made to use a JOIN or SUBST command on a drive that has already been joined. |
| ERROR_IS_SUBST_PATH 146L |
|
| |
The path specified is being used in a substitute. |
| ERROR_IS_SUBST_TARGET 149L |
|
| |
An attempt was made to join or substitute a drive for which a directory on the drive is the target of a previous substitute. |
| ERROR_IS_SUBSTED 135L |
|
| |
An attempt was made to use a JOIN or SUBST command on a drive that has already been substituted. |
| ERROR_ITERATED_DATA_EXCEEDS_64k 194L |
|
| |
The operating system cannot run %1. |
| ERROR_JOIN_TO_JOIN 138L |
|
| |
The system tried to join a drive to a directory on a joined drive. |
| ERROR_JOIN_TO_SUBST 140L |
|
| |
The system tried to join a drive to a directory on a substituted drive. |
| ERROR_JOURNAL_HOOK_SET 1430L |
|
| |
The journal hook is already installed. |
| ERROR_KEY_DELETED 1018L |
|
| |
Illegal operation attempted on a registry key which has been marked for deletion. |
| ERROR_KEY_HAS_CHILDREN 1020L |
|
| |
An attempt was made to create a symbolic link in a registry key that already has subkeys or values. |
| ERROR_LABEL_TOO_LONG 154L |
|
| |
The volume label you entered exceeds the 11 character limit. The first 11 characters were written to disk. Any characters that exceeded the 11 character limit were automatically deleted. |
| ERROR_LAST_ADMIN 1322L |
|
| |
Indicates the requested operation would disable or delete the last remaining administration account. This is not allowed to prevent creating a situation in which the system will not be administratable. |
| ERROR_LB_WITHOUT_TABSTOPS 1434L |
|
| |
This listbox doesn't support tab stops. |
| ERROR_LISTBOX_ID_NOT_FOUND 1416L |
|
| |
Listbox ID not found. |
| ERROR_LM_CROSS_ENCRYPTION_REQUIRED 1390L |
|
| |
An attempt was made to change a user password in the security account manager without providing the necessary LM cross-encrypted password. |
| ERROR_LOCAL_USER_SESSION_KEY 1303L |
|
| |
A user session key was requested for a local rpc connection. The session key returned is a constant value and not unique to this connection. There is little to be gained by encrypting data on such a connection. |
| ERROR_LOCK_FAILED 167L |
|
| |
Attempt to lock a region of a file failed. |
| ERROR_LOCK_VIOLATION 33L |
|
| |
The process cannot access the file because another process has locked a portion of the file. |
| ERROR_LOCKED 212L |
|
| |
The segment is locked and cannot be reallocated. |
| ERROR_LOGON_FAILURE 1326L |
|
| |
The attempted logon is invalid. This is either due to a bad username or authentication information. |
| ERROR_LOGON_NOT_GRANTED 1380L |
|
| |
A requested type of logon (e.g., Interactive, Network, Service) is not granted by the target system's local security policy. Please ask the system administrator to grant the necessary form of logon. |
| ERROR_LOGON_SESSION_COLLISION 1366L |
|
| |
The logon session is not in a state the is consistent with the requested operation. BUG, BUG – fix this message |
| ERROR_LOGON_SESSION_EXISTS 1363L |
|
| |
A attempt has been made to start a new session manager or LSA logon session with an ID that is already in use. |
| ERROR_LOGON_TYPE_NOT_GRANTED 1385L |
|
| |
A user has requested a type of logon (e.g., interactive or network) that has not be granted. An administrator has control over who may logon interactively and through the network. |
| ERROR_LONG_FILEMARK_DETECTED 1102L |
|
| |
A tape access reached a long filemark. |
| ERROR_LUIDS_EXHAUSTED 1334L |
|
| |
Indicates there are no more LUIDs to allocate. |
| ERROR_MAX_THRDS_REACHED 164L |
|
| |
No more threads can be created in the system. |
| ERROR_MEMBER_IN_ALIAS 1378L |
|
| |
The specified account name is not a member of the alias. |
| ERROR_MEMBER_IN_GROUP 1320L |
|
| |
The specified user account is already in the specified group account. Also used to indicate a group can not be deleted because it contains a member. |
| ERROR_MEMBER_NOT_IN_ALIAS 1377L |
|
| |
The specified account name is not a member of the alias. |
| ERROR_MEMBER_NOT_IN_GROUP 1321L |
|
| |
The specified user account is not a member of the specified group account. |
| ERROR_MEMBERS_PRIMARY_GROUP 1374L |
|
| |
Indicates a member can not be removed from a group because the group is currently the member's primary group. |
| ERROR_META_EXPANSION_TOO_LONG 208L |
|
| |
The global file name characters, * or ? are entered incorrectly or too many global file name characters are specified. |
| ERROR_MOD_NOT_FOUND 126L |
|
| |
The specified module could not be found. |
| ERROR_MORE_DATA 234L |
|
| |
More data is available. |
| ERROR_MR_MID_NOT_FOUND 317L |
|
| |
The system cannot find message for message number 0x%1 in message file for %2. |
| ERROR_NEGATIVE_SEEK 131L |
|
| |
BUGBUG – message text missing. |
| ERROR_NESTING_NOT_ALLOWED 215L |
|
| |
Can't nest calls to LoadModule. |
| ERROR_NET_WRITE_FAULT 88L |
|
| |
A write fault occurred on the network. |
| ERROR_NETNAME_DELETED 64L |
|
| |
The specified network name is no longer available. |
| ERROR_NETWORK_ACCESS_DENIED 65L |
|
| |
Network access is denied. |
| ERROR_NETWORK_BUSY 54L |
|
| |
The network is busy. |
| ERROR_NO_DATA 232L |
|
| |
Pipe close in progress. |
| ERROR_NO_DATA_DETECTED 1104L |
|
| |
During a tape access, the end of the data written is reached. |
| ERROR_NO_IMPERSONATION_TOKEN 1309L |
|
| |
An attempt has been made to operate on an impersonation token by a thread that is not currently impersonating a client. |
| ERROR_NO_INHERITANCE 1391L |
|
| |
Indicates an ACL contains no inheritable components |
| ERROR_NO_LOG_SPACE 1019L |
|
| |
System could not allocate required space in a registry log. |
| ERROR_NO_LOGON_SERVERS 1311L |
|
| |
There are currently no logon servers available to service the logon request. |
| ERROR_NO_MORE_FILES 18L |
|
| |
There are no more files. |
| ERROR_NO_MORE_ITEMS 259L |
|
| |
No more data is available. |
| ERROR_NO_MORE_SEARCH_HANDLES 113L |
|
| |
No more internal file identifiers available. |
| ERROR_NO_NET_OR_BAD_PATH 1203L |
|
| |
No network provider accepted the given network path. |
| ERROR_NO_NETWORK 2138L |
|
| |
The network is not present or not started. |
| ERROR_NO_PROC_SLOTS 89L |
|
| |
The system cannot start another process at this time. |
| ERROR_NO_QUOTAS_FOR_ACCOUNT 1302L |
|
| |
No system quota limits are specifically set for this Account. |
| ERROR_NO_SCROLLBARS 1447L |
|
| |
Window does not have scrollbars. |
| ERROR_NO_SECURITY_ON_OBJECT 1350L |
|
| |
Indicates an attempt was made to operate on the security of an object that does not have security associated with it. |
| ERROR_NO_SHUTDOWN_IN_PROGRESS 1116L |
|
| |
An attempt to abort the shutdown of the system failed because no shutdown was in progress. |
| ERROR_NO_SIGNAL_SENT 205L |
|
| |
No process in the command subtree has a signal handler. |
| ERROR_NO_SPOOL_SPACE 62L |
|
| |
Space to store the file waiting to be printed is not available on the server. |
| ERROR_NO_SUCH_ALIAS 1376L |
|
| |
The specified alias does not exist. |
| ERROR_NO_SUCH_DOMAIN 1355L |
|
| |
The specified Domain did not exist. |
| ERROR_NO_SUCH_GROUP 1319L |
|
| |
The specified group does not exist. |
| ERROR_NO_SUCH_LOGON_SESSION 1312L |
|
| |
A specified logon session does not exist. It may already have been terminated. |
| ERROR_NO_SUCH_MEMBER 1387L |
|
| |
A new member could not be added to an alias because the member does not exist. |
| ERROR_NO_SUCH_PACKAGE 1364L |
|
| |
A specified authentication package is unknown |
| ERROR_NO_SUCH_PRIVILEGE 1313L |
|
| |
A specified privilege does not exist. |
| ERROR_NO_SUCH_USER 1317L |
|
| |
The specified user does not exist. |
| ERROR_NO_SYSTEM_MENU 1437L |
|
| |
Window doesn't have system menu. |
| ERROR_NO_TAPE_IN_DRIVE 1112L |
|
| |
Tape query failed because of no tape in drive. |
| ERROR_NO_TOKEN 1008L |
|
| |
An attempt was made to reference a token that does not exist. |
| ERROR_NO_UNICODE_TRANSLATION 1113L |
|
| |
No mapping for the Unicode character exists in the target multi-byte code page. |
| ERROR_NO_VOLUME_LABEL 125L |
|
| |
The disk has no volume label. |
| ERROR_NO_WILDCARD_CHARACTERS 1417L |
|
| |
No wildcard characters found. |
| ERROR_NOACCESS 998L |
|
| |
Invalid access to memory location. |
| ERROR_NON_MDICHILD_WINDOW 1445L |
|
| |
DefMDIChildProc() called with a non-MDIChild window. |
| ERROR_NONE_MAPPED 1332L |
|
| |
None of the information to be translated has been translated. |
| ERROR_NOT_ALL_ASSIGNED 1300L |
|
| |
Indicates not all privileges referenced are assigned to the caller. This allows, for example, all privileges to be disabled without having to know exactly which privileges are assigned. |
| ERROR_NOT_CHILD_WINDOW 1442L |
|
| |
Window is not a child window. |
| ERROR_NOT_CONNECTED 2250L |
|
| |
This network connection does not exist. |
| ERROR_NOT_CONTAINER 1207L |
|
| |
Cannot enumerate a non-container. |
| ERROR_NOT_DOS_DISK 26L |
|
| |
The specified disk or diskette cannot be accessed. |
| ERROR_NOT_ENOUGH_MEMORY 8L |
|
| |
Not enough storage is available to process this command. |
| ERROR_NOT_JOINED 136L |
|
| |
The system tried to delete the JOIN of a drive that is not joined. |
| ERROR_NOT_LOCKED 158L |
|
| |
The segment is already unlocked. |
| ERROR_NOT_LOGON_PROCESS 1362L |
|
| |
The requested action is restricted for use by logon processes only. The calling process has not registered as a logon process. |
| ERROR_NOT_OWNER 288L |
|
| |
Attempt to release mutex not owned by caller. |
| ERROR_NOT_READY 21L |
|
| |
The drive is not ready. |
| ERROR_NOT_REGISTRY_FILE 1017L |
|
| |
The system has attempted to load or restore a file into the registry, and the specified file is not in the format of a registry file. |
| ERROR_NOT_SAME_DEVICE 17L |
|
| |
The system cannot move the file to a different disk drive. |
| ERROR_NOT_SUBSTED 137L |
|
| |
The system tried to delete the substitution of a drive that is not substituted. |
| ERROR_NOT_SUPPORTED 50L |
|
| |
The network request is not supported. |
| ERROR_NOTIFY_ENUM_DIR 1022L |
|
| |
This indicates that a notify change request is being completed and that the information is not being returned in the caller's buffer. The caller now needs to enumerate the files to find the changes. |
| ERROR_NT_CROSS_ENCRYPTION_REQUIRED 1386L |
|
| |
An attempt was made to change a user password in the security account manager without providing the necessary NT cross-encrypted password. |
| ERROR_NULL_LM_PASSWORD 1304L |
|
| |
The NT password is too complex to be converted to a Lan-Manager password. The Lan-Manager password returned is a NULL string. |
| ERROR_OPEN_FAILED 110L |
|
| |
The system cannot open the device or file specified. |
| ERROR_OPEN_FILES 2401L |
|
| |
There are open files or requests pending on this connection. |
| ERROR_OPERATION_ABORTED 995L |
|
| |
The IO operation has been aborted due to either thread exit or application request. |
| ERROR_OUT_OF_PAPER 28L |
|
| |
The printer is out of paper. |
| ERROR_OUT_OF_STRUCTURES 84L |
|
| |
Storage to process this request is not available. |
| ERROR_OUTOFMEMORY 14L |
|
| |
Not enough storage is available to complete this operation. |
| ERROR_PARTITION_FAILURE 1105L |
|
| |
Tape could not be partitioned. |
| ERROR_PASSWORD_EXPIRED 1330L |
|
| |
The user account's password has expired. |
| ERROR_PASSWORD_RESTRICTION 1325L |
|
| |
When trying to update a password, this status indicates that some password update rule has been violated. For example, the password may not meet length criteria. |
| ERROR_PATH_BUSY 148L |
|
| |
The path specified cannot be used at this time. |
| ERROR_PATH_NOT_FOUND 3L |
|
| |
The system cannot find the path specified. |
| ERROR_PIPE_BUSY 231L |
|
| |
All pipe instances busy. |
| ERROR_PIPE_CONNECTED 535L |
|
| |
There is a process on other end of the pipe. |
| ERROR_PIPE_LISTENING 536L |
|
| |
Waiting for a process to open the other end of the pipe. |
| ERROR_PIPE_NOT_CONNECTED 233L |
|
| |
No process on other end of pipe. |
| ERROR_POPUP_ALREADY_ACTIVE 1446L |
|
| |
Popup menu already active. |
| ERROR_PRINT_CANCELLED 63L |
|
| |
Your file waiting to be printed was deleted. |
| ERROR_PRINTQ_FULL 61L |
|
| |
The printer queue is full. |
| ERROR_PRIVATE_DIALOG_INDEX 1415L |
|
| |
Using private DIALOG window words. |
| ERROR_PRIVILEGE_NOT_HELD 1314L |
|
| |
A required privilege is not held by the client. |
| ERROR_PROC_NOT_FOUND 127L |
|
| |
The specified procedure could not be found. |
| ERROR_READ_FAULT 30L |
|
| |
The system cannot read from the specified device. |
| ERROR_REDIR_PAUSED 72L |
|
| |
The specified printer or disk device has been paused. |
| ERROR_REGISTRY_CORRUPT 1015L |
|
| |
The Registry is corrupt. The structure of one of the files that contains Registry data is corrupt, or the system's in memory image of the file is corrupt, or the file could not be recovered because its alternate copy or log was absent or corrupt. |
| ERROR_REGISTRY_IO_FAILED 1016L |
|
| |
An I/O operation initiated by the Registry failed unrecoverably. The Registry could not read in, or write out, or flush, one of the files that contain the system's image of the Registry. |
| ERROR_REGISTRY_RECOVERED 1014L |
|
| |
One of the files containing the system's Registry data had to be recovered by use of a log or alternate copy. The recovery was successful. |
| ERROR_RELOC_CHAIN_XEEDS_SEGLIM 201L |
|
| |
The operating system cannot run %1. |
| ERROR_REM_NOT_LIST 51L |
|
| |
The remote computer is not available. |
| ERROR_REQ_NOT_ACCEP 71L |
|
| |
The network request was not accepted. |
| ERROR_REVISION_MISMATCH 1306L |
|
| |
Indicates two revision levels are incompatible. |
| ERROR_RING2_STACK_IN_USE 207L |
|
| |
The ring 2 stack is in use. |
| ERROR_RING2SEG_MUST_BE_MOVABLE 200L |
|
| |
The code segment cannot be greater than or equal to 64KB. |
| ERROR_RXACT_COMMIT_FAILURE 1370L |
|
| |
Indicates an error has occurred during a registry transaction commit. The database has been left in an unknown, but probably inconsistent, state. The state of the registry transaction is left as COMMITTING. This status value is returned by the runtime library (RTL) registry transaction package (RXact). |
| ERROR_RXACT_INVALID_STATE 1369L |
|
| |
Indicates that the transaction state of a registry sub-tree is incompatible with the requested operation. For example, a request has been made to start a new transaction with one already in progress, or a request to apply a transaction when one is not currently in progress. This status value is returned by the runtime library (RTL) registry transaction package (RXact). |
| ERROR_SAME_DRIVE 143L |
|
| |
The system cannot join or substitute a drive to or for a directory on the same drive. |
| ERROR_SCREEN_ALREADY_LOCKED 1440L |
|
| |
Screen already locked. |
| ERROR_SECRET_TOO_LONG 1382L |
|
| |
The length of an secret exceeds the maximum length allowed. The length and number of secrets is limited to satisfy United States State Department export restrictions. |
| ERROR_SECTOR_NOT_FOUND 27L |
|
| |
The drive cannot find the sector requested. |
| ERROR_SEEK 25L |
|
| |
The drive cannot locate a specific area or track on the disk. |
| ERROR_SEEK_ON_DEVICE 132L |
|
| |
BUGBUG – message text missing. |
| ERROR_SEM_IS_SET 102L |
|
| |
The semaphore is set and cannot be closed. |
| ERROR_SEM_NOT_FOUND 187L |
|
| |
The specified system semaphore name was not found. |
| ERROR_SEM_OWNER_DIED 105L |
|
| |
The previous ownership of this semaphore has ended. |
| ERROR_SEM_TIMEOUT 121L |
|
| |
The semaphore timeout period has expired. |
| ERROR_SEM_USER_LIMIT 106L |
|
| |
Insert the diskette for drive %1. |
| ERROR_SERVER_DISABLED 1341L |
|
| |
The GUID allocation server is [already] disabled at the moment. |
| ERROR_SERVER_NOT_DISABLED 1342L |
|
| |
The GUID allocation server is [already] enabled at the moment. |
| ERROR_SETCOUNT_ON_BAD_LB 1433L |
|
| |
LB_SETCOUNT sent to non-lazy listbox. |
| ERROR_SETMARK_DETECTED 1103L |
|
| |
A tape access reached a setmark. |
| ERROR_SHARING_BUFFER_EXCEEDED 36L |
|
| |
Too many files opened for sharing. |
| ERROR_SHARING_PAUSED 70L |
|
| |
The remote server has been paused or is in the process of being started. |
| ERROR_SHARING_VIOLATION 32L |
|
| |
The process cannot access the file because it is being used by another process. |
| ERROR_SHORT_FILEMARK_DETECTED 1101L |
|
| |
A tape access reached a short filemark. |
| ERROR_SHUTDOWN_IN_PROGRESS 1115L |
|
| |
A system shutdown is in progress. |
| ERROR_SIGNAL_PENDING 162L |
|
| |
A signal is already pending. |
| ERROR_SIGNAL_REFUSED 156L |
|
| |
The recipient process has refused the signal. |
| ERROR_SOME_NOT_MAPPED 1301L |
|
| |
Some of the information to be translated has not been translated. |
| ERROR_SPECIAL_ACCOUNT 1371L |
|
| |
Indicates an operation has been attempted on a built-in (special) SAM account which is incompatible with built-in accounts. For example, built-in accounts can not be re-named or deleted. |
| ERROR_SPECIAL_GROUP 1372L |
|
| |
The operation requested may not be performed on the specified group because it is a built-in special group. |
| ERROR_SPECIAL_USER 1373L |
|
| |
The operation requested may not be performed on the specified user because it is a built-in special user. |
| ERROR_STACK_OVERFLOW 1001L |
|
| |
Recursion too deep, stack overflowed. |
| ERROR_SUBST_TO_JOIN 141L |
|
| |
The system tried to SUBST a drive to a directory on a joined drive. |
| ERROR_SUBST_TO_SUBST 139L |
|
| |
The system tried to substitute a drive to a directory on a substituted drive. |
| ERROR_SUCCESS 0L |
|
| |
The configuration registry database operation completed successfully. |
| ERROR_SWAPERROR 999L |
|
| |
Error accessing paging file. |
| ERROR_SYSTEM_TRACE 150L |
|
| |
System trace information was not specified in your CONFIG.SYS file, or tracing is disallowed. |
| ERROR_TAPE_OPERATION_NOT_SUPPORTED 1111L |
|
| |
Attempted operation not supported on drive. |
| ERROR_TAPE_WRITE_PROTECTED 1110L |
|
| |
Attempt to write to or erase a write protected tape. |
| ERROR_THREAD_1_INACTIVE 210L |
|
| |
The signal handler cannot be set. |
| ERROR_TLW_WITH_WSCHILD 1406L |
|
| |
CreateWindow() failed, creating top-level window with WS_CHILD style. |
| ERROR_TOKEN_ALREADY_IN_USE 1375L |
|
| |
An attempt was made to establish a token for use as a primary token but the token is already in use. A token can only be the primary token of one process at a time. |
| ERROR_TOO_MANY_CMDS 56L |
|
| |
The network BIOS command limit has been reached. |
| ERROR_TOO_MANY_CONTEXT_IDS 1384L |
|
| |
During a logon attempt, the user's security context accumulated too many security IDs. This is a very unusual situation. Remove the user from some groups or aliases to reduce the number of security ids to incorporate into the security context. |
| ERROR_TOO_MANY_LUIDS_REQUESTED 1333L |
|
| |
The number of LUIDs requested may not be allocated with a single allocation. |
| ERROR_TOO_MANY_MODULES 214L |
|
| |
Too many dynamic link modules are attached to this program or dynamic link module. |
| ERROR_TOO_MANY_MUXWAITERS 152L |
|
| |
DosMuxSemWait did not execute; too many semaphores are already set. |
| ERROR_TOO_MANY_NAMES 68L |
|
| |
The name limit for the local computer network adapter card was exceeded. |
| ERROR_TOO_MANY_OPEN_FILES 4L |
|
| |
The system cannot open the file. |
| ERROR_TOO_MANY_POSTS 298L |
|
| |
Too many posts were made to a semaphore. |
| ERROR_TOO_MANY_SECRETS 1381L |
|
| |
The maximum number of secrets that may be stored in a single system has been exceeded. The length and number of secrets is limited to satisfy United States State Department export restrictions. |
| ERROR_TOO_MANY_SEM_REQUESTS 103L |
|
| |
The semaphore cannot be set again. |
| ERROR_TOO_MANY_SEMAPHORES 100L |
|
| |
Cannot create another system semaphore. |
| ERROR_TOO_MANY_SESS 69L |
|
| |
The network BIOS session limit was exceeded. |
| ERROR_TOO_MANY_SIDS 1389L |
|
| |
Too many Sids have been specified. |
| ERROR_TOO_MANY_TCBS 155L |
|
| |
Cannot create another thread. |
| ERROR_UNABLE_TO_LOCK_MEDIA 1108L |
|
| |
Attempt to lock the eject media mechanism fails. |
| ERROR_UNABLE_TO_UNLOAD_MEDIA 1109L |
|
| |
Unload media fails. |
| ERROR_UNEXP_NET_ERR 59L |
|
| |
An unexpected network error occurred. |
| ERROR_UNKNOWN_REVISION 1305L |
|
| |
Indicates a revision number encountered or specified is not one known by the service. It may be a more recent revision than the service is aware of. |
| ERROR_UNRECOGNIZED_MEDIA 1785L |
|
| |
The disk media is not recognized. It may not be formatted. |
| ERROR_UNRECOGNIZED_VOLUME 1005L |
|
| |
The volume does not contain a recognized file system. Please make sure that all required file system drivers are loaded and that the volume is not corrupt. |
| ERROR_USER_EXISTS 1316L |
|
| |
The specified user already exists. |
| ERROR_VC_DISCONNECTED 240L |
|
| |
The session was cancelled. |
| ERROR_WAIT_NO_CHILDREN 128L |
|
| |
There are no child processes to wait for. |
| ERROR_WINDOW_NOT_COMBOBOX 1423L |
|
| |
The window is not a combobox. |
| ERROR_WINDOW_NOT_DIALOG 1420L |
|
| |
The window is not a valid dialog window. |
| ERROR_WINDOW_OF_OTHER_THREAD 1408L |
|
| |
Invalid window, belongs to other thread. |
| ERROR_WRITE_FAULT 29L |
|
| |
The system cannot write to the specified device. |
| ERROR_WRITE_PROTECT 19L |
|
| |
The diskette is write protected. |
| ERROR_WRONG_DISK 34L |
|
| |
The wrong diskette is in the drive. Insert %2 (Volume Serial Number: %3) into drive %1. |
| ERROR_WRONG_PASSWORD 1323L |
|
| |
When trying to update a password, this return status indicates that the value provided as the current password is not correct. |
| NO_ERROR 0L |
|
| |
NO_ERROR |
| RPC_S_ADDRESS_ERROR 1768L |
|
| |
An addressing error occurred in the server. |
| RPC_S_ALREADY_LISTENING 1713L |
|
| |
The server is already listening. |
| RPC_S_ALREADY_REGISTERED 1711L |
|
| |
The object uuid has already been registered. |
| RPC_S_BINDING_HAS_NO_AUTH 1746L |
|
| |
The binding does not contain any authentication information. |
| RPC_S_CALL_FAILED 1726L |
|
| |
The remote procedure call failed. |
| RPC_S_CALL_FAILED_DNE 1727L |
|
| |
The remote procedure call failed and did not execute. |
| RPC_S_CANNOT_BIND 1729L |
|
| |
An attempt to bind with the server failed. |
| RPC_S_CANNOT_SUPPORT 1764L |
|
| |
The requested operation is not supported. |
| RPC_S_CANT_CREATE_ENDPOINT 1720L |
|
| |
The endpoint can not be created. |
| RPC_S_DUPLICATE_ENDPOINT 1740L |
|
| |
The endpoint is a duplicate. |
| RPC_S_ENTRY_ALREADY_EXISTS 1760L |
|
| |
The entry already exists. |
| RPC_S_ENTRY_NOT_FOUND 1761L |
|
| |
The entry is not found. |
| RPC_S_FP_DIV_ZERO 1769L |
|
| |
A floating point operation at the server caused a divide by zero. |
| RPC_S_FP_OVERFLOW 1771L |
|
| |
A floating point overflow occurred at the server. |
| RPC_S_FP_UNDERFLOW 1770L |
|
| |
A floating point underflow occurred at the server. |
| RPC_S_INCOMPLETE_NAME 1755L |
|
| |
The entry name is incomplete. |
| RPC_S_INTERFACE_NOT_FOUND 1759L |
|
| |
The interface was not found. |
| RPC_S_INTERNAL_ERROR 1766L |
|
| |
An internal error occurred in rpc. |
| RPC_S_INVALID_AUTH_IDENTITY 1749L |
|
| |
The security context is invalid. |
| RPC_S_INVALID_BINDING 1702L |
|
| |
The binding handle is invalid. |
| RPC_S_INVALID_BOUND 1734L |
|
| |
The array bounds are invalid. |
| RPC_S_INVALID_ENDPOINT_FORMAT 1706L |
|
| |
The endpoint format is invalid. |
| RPC_S_INVALID_NAF_IF 1763L |
|
| |
The network address family is invalid. |
| RPC_S_INVALID_NAME_SYNTAX 1736L |
|
| |
The name syntax is invalid. |
| RPC_S_INVALID_NET_ADDR 1707L |
|
| |
The network address is invalid. |
| RPC_S_INVALID_NETWORK_OPTIONS 1724L |
|
| |
The network options are invalid. |
| RPC_S_INVALID_RPC_PROTSEQ 1704L |
|
| |
The rpc protocol sequence is invalid. |
| RPC_S_INVALID_STRING_BINDING 1700L |
|
| |
The string binding is invalid. |
| RPC_S_INVALID_STRING_UUID 1705L |
|
| |
The string uuid is invalid. |
| RPC_S_INVALID_TAG 1733L |
|
| |
The tag is invalid. |
| RPC_S_INVALID_TIMEOUT 1709L |
|
| |
The timeout value is invalid. |
| RPC_S_INVALID_VERS_OPTION 1756L |
|
| |
The version option is invalid. |
| RPC_S_MAX_CALLS_TOO_SMALL 1742L |
|
| |
The maximum number of calls is too small. |
| RPC_S_NAME_SERVICE_UNAVAILABLE 1762L |
|
| |
The name service is unavailable. |
| RPC_S_NO_BINDINGS 1718L |
|
| |
There are no bindings. |
| RPC_S_NO_CALL_ACTIVE 1725L |
|
| |
There is not a remote procedure call active in this thread. |
| RPC_S_NO_CONTEXT_AVAILABLE 1765L |
|
| |
No security context is available to allow impersonation. |
| RPC_S_NO_ENDPOINT_FOUND 1708L |
|
| |
No endpoint was found. |
| RPC_S_NO_ENTRY_NAME 1735L |
|
| |
The binding does not contain an entry name. |
| RPC_S_NO_INTERFACES_EXPORTED 1754L |
|
| |
No interfaces have been exported. |
| RPC_S_NO_MORE_MEMBERS 1757L |
|
| |
There are no more members. |
| RPC_S_NO_PROTSEQS 1719L |
|
| |
There are no protocol sequences. |
| RPC_S_NO_PROTSEQS_REGISTERED 1714L |
|
| |
No protocol sequences have been registered. |
| RPC_S_NOT_LISTENING 1715L |
|
| |
The server is not listening. |
| RPC_S_NOTHING_TO_UNEXPORT 1758L |
|
| |
There is nothing to unexport. |
| RPC_S_OBJECT_NOT_FOUND 1710L |
|
| |
The object uuid was not found. |
| RPC_S_OUT_OF_RESOURCES 1721L |
|
| |
Not enough resources are available to complete this operation. |
| RPC_S_PROCNUM_OUT_OF_RANGE 1745L |
|
| |
The procedure number is out of range. |
| RPC_S_PROTOCOL_ERROR 1728L |
|
| |
An rpc protocol error occurred. |
| RPC_S_PROTSEQ_NOT_FOUND 1744L |
|
| |
The rpc protocol sequence was not found. |
| RPC_S_PROTSEQ_NOT_SUPPORTED 1703L |
|
| |
The Rpc protocol sequence is not supported. |
| RPC_S_SERVER_NOT_LISTENING 1738L |
|
| |
The server is not listening for remote procedure calls. |
| RPC_S_SERVER_OUT_OF_MEMORY 1731L |
|
| |
The server has insufficient memory to complete this operation. |
| RPC_S_SERVER_TOO_BUSY 1723L |
|
| |
The server is too busy to complete this operation. |
| RPC_S_SERVER_UNAVAILABLE 1722L |
|
| |
The server is unavailable. |
| RPC_S_STRING_TOO_LONG 1743L |
|
| |
The string is too long. |
| RPC_S_TYPE_ALREADY_REGISTERED 1712L |
|
| |
The type uuid has already been registered. |
| RPC_S_UNKNOWN_AUTHN_LEVEL 1748L |
|
| |
The authentication level is unknown. |
| RPC_S_UNKNOWN_AUTHN_SERVICE 1747L |
|
| |
The authentication service is unknown. |
| RPC_S_UNKNOWN_AUTHN_TYPE 1741L |
|
| |
The authentication type is unknown. |
| RPC_S_UNKNOWN_AUTHZ_SERVICE 1750L |
|
| |
The authorization service is unknown. |
| RPC_S_UNKNOWN_IF 1717L |
|
| |
The interface is unknown. |
| RPC_S_UNKNOWN_MGR_TYPE 1716L |
|
| |
The manager type is unknown. |
| RPC_S_UNSUPPORTED_NAME_SYNTAX 1737L |
|
| |
The name syntax is not supported. |
| RPC_S_UNSUPPORTED_TRANS_SYN 1730L |
|
| |
The transfer syntax is not supported by the server. |
| RPC_S_UNSUPPORTED_TYPE 1732L |
|
| |
The type uuid is not supported. |
| RPC_S_UUID_NO_ADDRESS 1739L |
|
| |
No network address is available to use to construct a uuid. |
| RPC_S_WRONG_KIND_OF_BINDING 1701L |
|
| |
The binding handle is not the correct type. |
| RPC_S_ZERO_DIVIDE 1767L |
|
| |
The server attempted an integer divide by zero. |
| RPC_X_BAD_STUB_DATA 1783L |
|
| |
The stub received bad data. |
| RPC_X_BYTE_COUNT_TOO_SMALL 1782L |
|
| |
The byte count is too small |
| RPC_X_ENUM_VALUE_OUT_OF_RANGE 1781L |
|
| |
The enumeration value is out of range. |
| RPC_X_NO_MORE_ENTRIES 1772L |
|
| |
The list of servers available for auto_handle binding has been exhausted. |
| RPC_X_NULL_REF_POINTER 1780L |
|
| |
A null reference pointer was passed to the stub. |
| RPC_X_SS_CANNOT_GET_CALL_HANDLE 1779L |
|
| |
The stub is unable to get the call handle. |
| RPC_X_SS_CHAR_TRANS_OPEN_FAIL 1773L |
|
| |
The file designated by DCERPCCHARTRANS cannot be opened. |
| RPC_X_SS_CHAR_TRANS_SHORT_FILE 1774L |
|
| |
The file containing the character translation table has fewer than 512 bytes. |
| RPC_X_SS_CONTEXT_DAMAGED 1777L |
|
| |
The context handle changed during a call. |
| RPC_X_SS_CONTEXT_MISMATCH 1776L |
|
| |
The context handle does not match any known context handles. |
| RPC_X_SS_HANDLES_MISMATCH 1778L |
|
| |
The binding handles passed to a remote procedure call do not match. |
| RPC_X_SS_IN_NULL_CONTEXT 1775L |
|
| |
A null context handle is passed as an [in] parameter. |