B.2 Numerical List of Error Codes

Error Value and Name

Description

0L NO_ERROR
	NO_ERROR
1L ERROR_INVALID_FUNCTION
	Incorrect function
2L ERROR_FILE_NOT_FOUND
	The system cannot find the file specified.
3L ERROR_PATH_NOT_FOUND
	The system cannot find the path specified.
4L ERROR_TOO_MANY_OPEN_FILES
	The system cannot open the file.
5L ERROR_ACCESS_DENIED
	Access Denied.
6L ERROR_INVALID_HANDLE
	Incorrect internal file identifier.
7L ERROR_ARENA_TRASHED
	The storage control blocks were destroyed.
8L ERROR_NOT_ENOUGH_MEMORY
	Not enough storage is available to process this command.
9L ERROR_INVALID_BLOCK
	The storage control block address is invalid.
10L ERROR_BAD_ENVIRONMENT
	The environment is incorrect.
11L ERROR_BAD_FORMAT
	An attempt was made to load a program with an incorrect format.
12L ERROR_INVALID_ACCESS
	The access code is invalid.
13L ERROR_INVALID_DATA
	The data is invalid.
14L ERROR_OUTOFMEMORY
	Not enough storage is available to complete this operation.
15L ERROR_INVALID_DRIVE
	The system cannot find the drive specified.
16L ERROR_CURRENT_DIRECTORY
	The directory cannot be removed.
17L ERROR_NOT_SAME_DEVICE
	The system cannot move the file to a different disk drive.
18L ERROR_NO_MORE_FILES
	There are no more files.
19L ERROR_WRITE_PROTECT
	The diskette is write protected.
20L ERROR_BAD_UNIT
	The system cannot find the device specified.
21L ERROR_NOT_READY
	The drive is not ready.
22L ERROR_BAD_COMMAND
	The device does not recognize the command.
23L ERROR_CRC
	Data error (cyclic redundancy check)
24L ERROR_BAD_LENGTH
	The program issued a command but the command length is incorrect.
25L ERROR_SEEK
	The drive cannot locate a specific area or track on the disk.
26L ERROR_NOT_DOS_DISK
	The specified disk or diskette cannot be accessed.
27L ERROR_SECTOR_NOT_FOUND
	The drive cannot find the sector requested.
28L ERROR_OUT_OF_PAPER
	The printer is out of paper.
29L ERROR_WRITE_FAULT
	The system cannot write to the specified device.
30L ERROR_READ_FAULT
	The system cannot read from the specified device.
31L ERROR_GEN_FAILURE
	A device attached to the system is not functioning.
32L ERROR_SHARING_VIOLATION
	The process cannot access the file because it is being used by another process.
33L ERROR_LOCK_VIOLATION
	The process cannot access the file because another process has locked a portion of the file.
34L ERROR_WRONG_DISK
	The wrong diskette is in the drive. Insert %2 (Volume Serial Number: %3) into drive %1.
36L ERROR_SHARING_BUFFER_EXCEEDED
	Too many files opened for sharing.
38L ERROR_HANDLE_EOF
	Reached End of File.
39L ERROR_HANDLE_DISK_FULL
	The disk is full.
50L ERROR_NOT_SUPPORTED
	The network request is not supported.
51L ERROR_REM_NOT_LIST
	The remote computer is not available.
52L ERROR_DUP_NAME
	A duplicate name exists on the network.
53L ERROR_BAD_NETPATH
	The network path was not found.
54L ERROR_NETWORK_BUSY
	The network is busy.
55L ERROR_DEV_NOT_EXIST
	The specified network resource is no longer available.
56L ERROR_TOO_MANY_CMDS
	The network BIOS command limit has been reached.
57L ERROR_ADAP_HDW_ERR
	A network adapter hardware error occurred.
58L ERROR_BAD_NET_RESP
	The specified server cannot perform the requested operation.
59L ERROR_UNEXP_NET_ERR
	An unexpected network error occurred.
60L ERROR_BAD_REM_ADAP
	The remote adapter is not compatible.
61L ERROR_PRINTQ_FULL
	The printer queue is full.
62L ERROR_NO_SPOOL_SPACE
	Space to store the file waiting to be printed is not available on the server.
63L ERROR_PRINT_CANCELLED
	Your file waiting to be printed was deleted.
64L ERROR_NETNAME_DELETED
	The specified network name is no longer available.
65L ERROR_NETWORK_ACCESS_DENIED
	Network access is denied.
66L ERROR_BAD_DEV_TYPE
	The network resource type is not correct.
67L ERROR_BAD_NET_NAME
	The network name cannot be found.
68L ERROR_TOO_MANY_NAMES
	The name limit for the local computer network adapter card was exceeded.
69L ERROR_TOO_MANY_SESS
	The network BIOS session limit was exceeded.
70L ERROR_SHARING_PAUSED
	The remote server has been paused or is in the process of being started.
71L ERROR_REQ_NOT_ACCEP
	The network request was not accepted.
72L ERROR_REDIR_PAUSED
	The specified printer or disk device has been paused.
80L ERROR_FILE_EXISTS
	The file exists.
82L ERROR_CANNOT_MAKE
	The directory or file cannot be created.
83L ERROR_FAIL_I24
	Fail on INT 24
84L ERROR_OUT_OF_STRUCTURES
	Storage to process this request is not available.
85L ERROR_ALREADY_ASSIGNED
	The local device name is already in use.
86L ERROR_INVALID_PASSWORD
	The specified network password is not correct.
87L ERROR_INVALID_PARAMETER
	The parameter is incorrect.
88L ERROR_NET_WRITE_FAULT
	A write fault occurred on the network.
89L ERROR_NO_PROC_SLOTS
	The system cannot start another process at this time.
100L ERROR_TOO_MANY_SEMAPHORES
	Cannot create another system semaphore.
101L ERROR_EXCL_SEM_ALREADY_OWNED
	The exclusive semaphore is owned by another process.
102L ERROR_SEM_IS_SET
	The semaphore is set and cannot be closed.
103L ERROR_TOO_MANY_SEM_REQUESTS
	The semaphore cannot be set again.
104L ERROR_INVALID_AT_INTERRUPT_TIME
	Cannot request exclusive semaphores at interrupt time.
105L ERROR_SEM_OWNER_DIED
	The previous ownership of this semaphore has ended.
106L ERROR_SEM_USER_LIMIT
	Insert the diskette for drive %1.
107L ERROR_DISK_CHANGE
	Program stopped because alternate diskette was not inserted.
108L ERROR_DRIVE_LOCKED
	The disk is in use or locked by another process.
109L ERROR_BROKEN_PIPE
	The pipe has been ended.
110L ERROR_OPEN_FAILED
	The system cannot open the device or file specified.
111L ERROR_BUFFER_OVERFLOW
	The file name is too long.
112L ERROR_DISK_FULL
	There is not enough space on the disk.
113L ERROR_NO_MORE_SEARCH_HANDLES
	No more internal file identifiers available.
114L ERROR_INVALID_TARGET_HANDLE
	The target internal file identifier is incorrect.
117L ERROR_INVALID_CATEGORY
	The IOCTL call made by the application program is not correct.
118L ERROR_INVALID_VERIFY_SWITCH
	The verify-on-write switch parameter value is not correct.
119L ERROR_BAD_DRIVER_LEVEL
	The system does not support the command requested.
120L ERROR_CALL_NOT_IMPLEMENTED
	The Application Program Interface (API) entered will only work in Windows/NT mode.
121L ERROR_SEM_TIMEOUT
	The semaphore timeout period has expired.
122L ERROR_INSUFFICIENT_BUFFER
	The data area passed to a system call is too small.
123L ERROR_INVALID_NAME
	The file name, directory name, or volume label is not syntactically correct.
124L ERROR_INVALID_LEVEL
	The system call level is not correct.
125L ERROR_NO_VOLUME_LABEL
	The disk has no volume label.
126L ERROR_MOD_NOT_FOUND
	The specified module could not be found.
127L ERROR_PROC_NOT_FOUND
	The specified procedure could not be found.
128L ERROR_WAIT_NO_CHILDREN
	There are no child processes to wait for.
129L ERROR_CHILD_NOT_COMPLETE
	The %1 application cannot be run in Windows mode.
130L ERROR_DIRECT_ACCESS_HANDLE
	BUGBUG – message text missing.
131L ERROR_NEGATIVE_SEEK
	BUGBUG – message text missing.
132L ERROR_SEEK_ON_DEVICE
	BUGBUG – message text missing.
133L ERROR_IS_JOIN_TARGET
	A JOIN or SUBST command cannot be used for a drive that contains previously joined drives.
134L ERROR_IS_JOINED
	An attempt was made to use a JOIN or SUBST command on a drive that has already been joined.
135L ERROR_IS_SUBSTED
	An attempt was made to use a JOIN or SUBST command on a drive that has already been substituted.
136L ERROR_NOT_JOINED
	The system tried to delete the JOIN of a drive that is not joined.
137L ERROR_NOT_SUBSTED
	The system tried to delete the substitution of a drive that is not substituted.
138L ERROR_JOIN_TO_JOIN
	The system tried to join a drive to a directory on a joined drive.
139L ERROR_SUBST_TO_SUBST
	The system tried to substitute a drive to a directory on a substituted drive.
140L ERROR_JOIN_TO_SUBST
	The system tried to join a drive to a directory on a substituted drive.
141L ERROR_SUBST_TO_JOIN
	The system tried to SUBST a drive to a directory on a joined drive.
142L ERROR_BUSY_DRIVE
	The system cannot perform a JOIN or SUBST at this time.
143L ERROR_SAME_DRIVE
	The system cannot join or substitute a drive to or for a directory on the same drive.
144L ERROR_DIR_NOT_ROOT
	The directory is not a subdirectory of the root directory.
145L ERROR_DIR_NOT_EMPTY
	The directory is not empty.
146L ERROR_IS_SUBST_PATH
	The path specified is being used in a substitute.
147L ERROR_IS_JOIN_PATH
	Not enough resources are available to process this command.
148L ERROR_PATH_BUSY
	The path specified cannot be used at this time.
149L ERROR_IS_SUBST_TARGET
	An attempt was made to join or substitute a drive for which a directory on the drive is the target of a previous substitute.
150L ERROR_SYSTEM_TRACE
	System trace information was not specified in your CONFIG.SYS file, or tracing is disallowed.
151L ERROR_INVALID_EVENT_COUNT
	The number of specified semaphore events for DosMuxSemWait is not correct.
152L ERROR_TOO_MANY_MUXWAITERS
	DosMuxSemWait did not execute; too many semaphores are already set.
153L ERROR_INVALID_LIST_FORMAT
	The DosMuxSemWait list is not correct.
154L ERROR_LABEL_TOO_LONG
	The volume label you entered exceeds the 11 character limit. The first 11 characters were written to disk. Any characters that exceeded the 11 character limit were automatically deleted.
155L ERROR_TOO_MANY_TCBS
	Cannot create another thread.
156L ERROR_SIGNAL_REFUSED
	The recipient process has refused the signal.
157L ERROR_DISCARDED
	The segment is already discarded and cannot be locked.
158L ERROR_NOT_LOCKED
	The segment is already unlocked.
159L ERROR_BAD_THREADID_ADDR
	The address for the thread ID is not correct.
160L ERROR_BAD_ARGUMENTS
	The argument string passed to DosExecPgm is not correct.
161L ERROR_BAD_PATHNAME
	Invalid path name specified.
162L ERROR_SIGNAL_PENDING
	A signal is already pending.
164L ERROR_MAX_THRDS_REACHED
	No more threads can be created in the system.
167L ERROR_LOCK_FAILED
	Attempt to lock a region of a file failed.
170L ERROR_BUSY
	The requested resource is in use.
173L ERROR_CANCEL_VIOLATION
	A lock request was not outstanding for the supplied cancel region.
174L ERROR_ATOMIC_LOCKS_NOT_SUPPORTED
	The file system does not supporting atomic changing of the lock type.
180L ERROR_INVALID_SEGMENT_NUMBER
	The system detected a segment number that was not correct.
182L ERROR_INVALID_ORDINAL
	The operating system cannot run %1.
183L ERROR_ALREADY_EXISTS
	Attempt to create file that already exists.
186L ERROR_INVALID_FLAG_NUMBER
	The flag passed is not correct.
187L ERROR_SEM_NOT_FOUND
	The specified system semaphore name was not found.
188L ERROR_INVALID_STARTING_CODESEG
	The operating system cannot run %1.
189L ERROR_INVALID_STACKSEG
	The operating system cannot run %1.
190L ERROR_INVALID_MODULETYPE
	The operating system cannot run %1.
191L ERROR_INVALID_EXE_SIGNATURE
	%1 cannot be run in Windows/NT mode.
192L ERROR_EXE_MARKED_INVALID
	The operating system cannot run %1.
193L ERROR_BAD_EXE_FORMAT
	%1 is not a valid Windows application.
194L ERROR_ITERATED_DATA_EXCEEDS_64k
	The operating system cannot run %1.
195L ERROR_INVALID_MINALLOCSIZE
	The operating system cannot run %1.
196L ERROR_DYNLINK_FROM_INVALID_RING
	The operating system cannot run this application program.
197L ERROR_IOPL_NOT_ENABLED
	The operating system is not presently configured to run this application.
198L ERROR_INVALID_SEGDPL
	The operating system cannot run %1.
199L ERROR_AUTODATASEG_EXCEEDS_64k
	The operating system cannot run this application program.
200L ERROR_RING2SEG_MUST_BE_MOVABLE
	The code segment cannot be greater than or equal to 64KB.
201L ERROR_RELOC_CHAIN_XEEDS_SEGLIM
	The operating system cannot run %1.
202L ERROR_INFLOOP_IN_RELOC_CHAIN
	The operating system cannot run %1.
203L ERROR_ENVVAR_NOT_FOUND
	The system could not find the environment option that was entered.
205L ERROR_NO_SIGNAL_SENT
	No process in the command subtree has a signal handler.
206L ERROR_FILENAME_EXCED_RANGE
	The file name or extension is too long.
207L ERROR_RING2_STACK_IN_USE
	The ring 2 stack is in use.
208L ERROR_META_EXPANSION_TOO_LONG
	The global file name characters, * or ? are entered incorrectly or too many global file name characters are specified.
209L ERROR_INVALID_SIGNAL_NUMBER
	The signal being posted is not correct.
210L ERROR_THREAD_1_INACTIVE
	The signal handler cannot be set.
212L ERROR_LOCKED
	The segment is locked and cannot be reallocated.
214L ERROR_TOO_MANY_MODULES
	Too many dynamic link modules are attached to this program or dynamic link module.
215L ERROR_NESTING_NOT_ALLOWED
	Can't nest calls to LoadModule.
230L ERROR_BAD_PIPE
	Invalid pipe state.
231L ERROR_PIPE_BUSY
	All pipe instances busy.
232L ERROR_NO_DATA
	Pipe close in progress.
233L ERROR_PIPE_NOT_CONNECTED
	No process on other end of pipe.
234L ERROR_MORE_DATA
	More data is available.
240L ERROR_VC_DISCONNECTED
	The session was cancelled.
254L ERROR_INVALID_EA_NAME
	The specified EA name was invalid.
255L ERROR_EA_LIST_INCONSISTENT
	The EAs are inconsistent.
259L ERROR_NO_MORE_ITEMS
	No more data is available.
266L ERROR_CANNOT_COPY
	The Copy API cannot be used.
267L ERROR_DIRECTORY
	Invalid directory name.
275L ERROR_EAS_DIDNT_FIT
	The EAs did not fit in the buffer.
276L ERROR_EA_FILE_CORRUPT
	The EA file on the mounted file system is corrupt.
277L ERROR_EA_TABLE_FULL
	The EA table in the EA file on the mounted file system is full.
278L ERROR_INVALID_EA_HANDLE
	The EA handle specified is invalid.
282L ERROR_EAS_NOT_SUPPORTED
	The mounted file system does not support extended attributes.
288L ERROR_NOT_OWNER
	Attempt to release mutex not owned by caller.
298L ERROR_TOO_MANY_POSTS
	Too many posts were made to a semaphore.
317L ERROR_MR_MID_NOT_FOUND
	The system cannot find message for message number 0x%1 in message file for %2.
487L ERROR_INVALID_ADDRESS
	Attempt to access invalid address.
534L ERROR_ARITHMETIC_OVERFLOW
	Arithmetic result exceeded 32-bits.
535L ERROR_PIPE_CONNECTED
	There is a process on other end of the pipe.
536L ERROR_PIPE_LISTENING
	Waiting for a process to open the other end of the pipe.
994L ERROR_EA_ACCESS_DENIED
	Access to the EA was denied.
995L ERROR_OPERATION_ABORTED
	The IO operation has been aborted due to either thread exit or application request.
996L ERROR_IO_INCOMPLETE
	Overlapped IO event not in signalled state.
997L ERROR_IO_PENDING
	Overlapped IO operation in progress.
998L ERROR_NOACCESS
	Invalid access to memory location.
999L ERROR_SWAPERROR
	Error accessing paging file.
1001L ERROR_STACK_OVERFLOW
	Recursion too deep, stack overflowed.
1002L ERROR_INVALID_MESSAGE
	Window can't handle sent message.
1003L ERROR_CAN_NOT_COMPLETE
	Cannot complete function for some reason. Like calling GetSelection() when there is no selection.
1004L ERROR_INVALID_FLAGS
	Invalid flags.
1005L ERROR_UNRECOGNIZED_VOLUME
	The volume does not contain a recognized file system. Please make sure that all required file system drivers are loaded and that the volume is not corrupt.
1006L ERROR_FILE_INVALID
	The volume for a file has been externally altered such that the opened file is no longer valid.
1007L ERROR_FULLSCREEN_MODE
	The requested operation cannot be performed in fullscreen mode.
1008L ERROR_NO_TOKEN
	An attempt was made to reference a token that does not exist.
1009L ERROR_BADDB
	The configuration registry database is corrupt.
1010L ERROR_BADKEY
	The configuration registry key is invalid.
1011L ERROR_CANTOPEN
	The configuration registry key could not be opened.
1012L ERROR_CANTREAD
	The configuration registry key could not be read.
1013L ERROR_CANTWRITE
	The configuration registry key could not be written.
1014L ERROR_REGISTRY_RECOVERED
	One of the files containing the system's Registry data had to be recovered by use of a log or alternate copy. The recovery was successful.
1015L ERROR_REGISTRY_CORRUPT
	The Registry is corrupt. The structure of one of the files that contains Registry data is corrupt, or the system's in memory image of the file is corrupt, or the file could not be recovered because its alternate copy or log was absent or corrupt.
1016L ERROR_REGISTRY_IO_FAILED
	An I/O operation initiated by the Registry failed unrecoverably. The Registry could not read in, or write out, or flush, one of the files that contain the system's image of the Registry.
1017L ERROR_NOT_REGISTRY_FILE
	The system has attempted to load or restore a file into the registry, and the specified file is not in the format of a registry file.
1018L ERROR_KEY_DELETED
	Illegal operation attempted on a registry key which has been marked for deletion.
1019L ERROR_NO_LOG_SPACE
	System could not allocate required space in a registry log.
1020L ERROR_KEY_HAS_CHILDREN
	An attempt was made to create a symbolic link in a registry key that already has subkeys or values.
1021L ERROR_CHILD_MUST_BE_VOLATILE
	An attempt was made to create a Stable subkey under a Volatile parent key.
1022L ERROR_NOTIFY_ENUM_DIR
	This indicates that a notify change request is being completed and that the information is not being returned in the caller's buffer. The caller now needs to enumerate the files to find the changes.
1100L ERROR_END_OF_MEDIA
	End of tape mark has been reached during an operation.
1101L ERROR_SHORT_FILEMARK_DETECTED
	A tape access reached a short filemark.
1102L ERROR_LONG_FILEMARK_DETECTED
	A tape access reached a long filemark.
1103L ERROR_SETMARK_DETECTED
	A tape access reached a setmark.
1104L ERROR_NO_DATA_DETECTED
	During a tape access, the end of the data written is reached.
1105L ERROR_PARTITION_FAILURE
	Tape could not be partitioned.
1106L ERROR_INVALID_BLOCK_LENGTH
	When accessing a new tape of a multivolume partition, the current blocksize is incorrect.
1107L ERROR_DEVICE_NOT_PARTITIONED
	Tape partition information could not be found when loading a tape.
1108L ERROR_UNABLE_TO_LOCK_MEDIA
	Attempt to lock the eject media mechanism fails.
1109L ERROR_UNABLE_TO_UNLOAD_MEDIA
	Unload media fails.
1110L ERROR_TAPE_WRITE_PROTECTED
	Attempt to write to or erase a write protected tape.
1111L ERROR_TAPE_OPERATION_NOT_SUPPORTED
	Attempted operation not supported on drive.
1112L ERROR_NO_TAPE_IN_DRIVE
	Tape query failed because of no tape in drive.
1113L ERROR_NO_UNICODE_TRANSLATION
	No mapping for the Unicode character exists in the target multi-byte code page.
1114L ERROR_DLL_INIT_FAILED
	A DLL initialization routine failed.
1115L ERROR_SHUTDOWN_IN_PROGRESS
	A system shutdown is in progress.
1116L ERROR_NO_SHUTDOWN_IN_PROGRESS
	An attempt to abort the shutdown of the system failed because no shutdown was in progress.
1117L ERROR_IO_DEVICE
	The request could not be performed because of an I/O device error.
2202L ERROR_BAD_USERNAME
	The specified user name is invalid.
2138L ERROR_NO_NETWORK
	The network is not present or not started.
2250L ERROR_NOT_CONNECTED
	This network connection does not exist.
2401L ERROR_OPEN_FILES
	There are open files or requests pending on this connection.
2404L ERROR_DEVICE_IN_USE
	The device is in use by an active process and cannot be disconnected.
1200L ERROR_BAD_DEVICE
	The specified device name is invalid.
1201L ERROR_CONNECTION_UNAVAIL
	The device is not currently connected but it is a remembered connection.
1202L ERROR_DEVICE_ALREADY_REMEMBERED
	An attempt was made to remember a device that had previously been remembered.
1203L ERROR_NO_NET_OR_BAD_PATH
	No network provider accepted the given network path.
1204L ERROR_BAD_PROVIDER
	The specified network provider name is invalid.
1205L ERROR_CANNOT_OPEN_PROFILE
	Unable to open the network connection profile.
1206L ERROR_BAD_PROFILE
	The network connection profile is corrupt.
1207L ERROR_NOT_CONTAINER
	Cannot enumerate a non-container.
1208L ERROR_EXTENDED_ERROR
	An extended error has occurred.
1300L ERROR_NOT_ALL_ASSIGNED
	Indicates not all privileges referenced are assigned to the caller. This allows, for example, all privileges to be disabled without having to know exactly which privileges are assigned.
1301L ERROR_SOME_NOT_MAPPED
	Some of the information to be translated has not been translated.
1302L ERROR_NO_QUOTAS_FOR_ACCOUNT
	No system quota limits are specifically set for this Account.
1303L ERROR_LOCAL_USER_SESSION_KEY
	A user session key was requested for a local rpc connection. The session key returned is a constant value and not unique to this connection. There is little to be gained by encrypting data on such a connection.
1304L ERROR_NULL_LM_PASSWORD
	The NT password is too complex to be converted to a Lan-Manager password. The Lan-Manager password returned is a NULL string.
1305L ERROR_UNKNOWN_REVISION
	Indicates a revision number encountered or specified is not one known by the service. It may be a more recent revision than the service is aware of.
1306L ERROR_REVISION_MISMATCH
	Indicates two revision levels are incompatible.
1307L ERROR_INVALID_OWNER
	Indicates a particular Security ID may not be assigned as the owner of an object.
1308L ERROR_INVALID_PRIMARY_GROUP
	Indicates a particular Security ID may not be assigned as the primary group of an object.
1309L ERROR_NO_IMPERSONATION_TOKEN
	An attempt has been made to operate on an impersonation token by a thread that is not currently impersonating a client.
1310L ERROR_CANT_DISABLE_MANDATORY
	A mandatory group may not be disabled.
1311L ERROR_NO_LOGON_SERVERS
	There are currently no logon servers available to service the logon request.
1312L ERROR_NO_SUCH_LOGON_SESSION
	A specified logon session does not exist. It may already have been terminated.
1313L ERROR_NO_SUCH_PRIVILEGE
	A specified privilege does not exist.
1314L ERROR_PRIVILEGE_NOT_HELD
	A required privilege is not held by the client.
1315L ERROR_INVALID_ACCOUNT_NAME
	The name provided is not a properly formed account name.
1316L ERROR_USER_EXISTS
	The specified user already exists.
1317L ERROR_NO_SUCH_USER
	The specified user does not exist.
1318L ERROR_GROUP_EXISTS
	The specified group already exists.
1319L ERROR_NO_SUCH_GROUP
	The specified group does not exist.
1320L ERROR_MEMBER_IN_GROUP
	The specified user account is already in the specified group account. Also used to indicate a group can not be deleted because it contains a member.
1321L ERROR_MEMBER_NOT_IN_GROUP
	The specified user account is not a member of the specified group account.
1322L ERROR_LAST_ADMIN
	Indicates the requested operation would disable or delete the last remaining administration account. This is not allowed to prevent creating a situation in which the system will not be administratable.
1323L ERROR_WRONG_PASSWORD
	When trying to update a password, this return status indicates that the value provided as the current password is not correct.
1324L ERROR_ILL_FORMED_PASSWORD
	When trying to update a password, this return status indicates that the value provided for the new password contains values that are not allowed in passwords.
1325L ERROR_PASSWORD_RESTRICTION
	When trying to update a password, this status indicates that some password update rule has been violated. For example, the password may not meet length criteria.
1326L ERROR_LOGON_FAILURE
	The attempted logon is invalid. This is either due to a bad username or authentication information.
1327L ERROR_ACCOUNT_RESTRICTION
	Indicates a referenced user name and authentication information are valid, but some user account restriction has prevented successful authentication (such as time-of-day restrictions).
1328L ERROR_INVALID_LOGON_HOURS
	The user account has time restrictions and may not be logged onto at this time.
1329L ERROR_INVALID_WORKSTATION
	The user account is restricted such that it may not be used to log on from the source workstation.
1330L ERROR_PASSWORD_EXPIRED
	The user account's password has expired.
1331L ERROR_ACCOUNT_DISABLED
	The referenced account is currently disabled and may not be logged on to.
1332L ERROR_NONE_MAPPED
	None of the information to be translated has been translated.
1333L ERROR_TOO_MANY_LUIDS_REQUESTED
	The number of LUIDs requested may not be allocated with a single allocation.
1334L ERROR_LUIDS_EXHAUSTED
	Indicates there are no more LUIDs to allocate.
1335L ERROR_INVALID_SUB_AUTHORITY
	Indicates the sub-authority value is invalid for the particular use.
1336L ERROR_INVALID_ACL
	Indicates the ACL structure is not valid.
1337L ERROR_INVALID_SID
	Indicates the SID structure is not valid.
1338L ERROR_INVALID_SECURITY_DESCR
	Indicates the SECURITY_DESCRIPTOR structure is not valid.
1340L ERROR_BAD_INHERITANCE_ACL
	Indicates that an attempt to build either an inherited ACL or ACE was not successful. This can be caused by a number of things. One of the more probable causes is the replacement of a CreatorId with an SID that didn't fit into the ACE or ACL.
1341L ERROR_SERVER_DISABLED
	The GUID allocation server is [already] disabled at the moment.
1342L ERROR_SERVER_NOT_DISABLED
	The GUID allocation server is [already] enabled at the moment.
1343L ERROR_INVALID_ID_AUTHORITY
	The value provided was an invalid value for an identifier authority.
1344L ERROR_ALLOTTED_SPACE_EXCEEDED
	When a block of memory is allotted for future updates, such as the memory allocated to hold discretionary access control and primary group information, successive updates may exceed the amount of memory originally allotted. Since quota may already have been charged to several processes which have handles to the object, it is not reasonable to alter the size of the allocated memory. Instead, a request that requires more memory than has been allotted must fail and the ERROR_ALLOTED_SPACE_EXCEEDED error returned.
1345L ERROR_INVALID_GROUP_ATTRIBUTES
	The specified attributes are invalid, or incompatible with the attributes for the group as a whole.
1346L ERROR_BAD_IMPERSONATION_LEVEL
	A specified impersonation level is invalid. Also used to indicate a required impersonation level was not provided.
1347L ERROR_CANT_OPEN_ANONYMOUS
	An attempt was made to open an Anonymous level token. Anonymous tokens may not be opened.
1348L ERROR_BAD_VALIDATION_CLASS
	The validation information class requested was invalid.
1349L ERROR_BAD_TOKEN_TYPE
	The type of a token object is inappropriate for its attempted use.
1350L ERROR_NO_SECURITY_ON_OBJECT
	Indicates an attempt was made to operate on the security of an object that does not have security associated with it.
1351L ERROR_CANT_ACCESS_DOMAIN_INFO
	Indicates a domain controller could not be contacted or that objects within the domain are protected such that necessary information could not be retrieved.
1352L ERROR_INVALID_SERVER_STATE
	Indicates the Sam Server was in the wrong state to perform the desired operation.
1353L ERROR_INVALID_DOMAIN_STATE
	Indicates the Domain was in the wrong state to perform the desired operation.
1354L ERROR_INVALID_DOMAIN_ROLE
	Indicates the desired operation cannot be completed with the domain in its present role.
1355L ERROR_NO_SUCH_DOMAIN
	The specified Domain did not exist.
1356L ERROR_DOMAIN_EXISTS
	The specified Domain already exists.
1357L ERROR_DOMAIN_LIMIT_EXCEEDED
	An attempt to exceed the limit on the number of domains per server for this release.
1358L ERROR_INTERNAL_DB_CORRUPTION
	This error indicates that the requested operation cannot be completed due to a catastrophic media failure or on-disk data structure corruption
1359L ERROR_INTERNAL_ERROR
	This error indicates that the SAM server has encounterred an internal consistency error in its database. This catastrophic failure will prevent further operation of SAM
1360L ERROR_GENERIC_NOT_MAPPED
	Indicates generic access types were contained in an access mask which should already be mapped to non-generic access types.
1361L ERROR_BAD_DESCRIPTOR_FORMAT
	Indicates a security descriptor is not in the necessary format (absolute or self-relative).
1362L ERROR_NOT_LOGON_PROCESS
	The requested action is restricted for use by logon processes only. The calling process has not registered as a logon process.
1363L ERROR_LOGON_SESSION_EXISTS
	A attempt has been made to start a new session manager or LSA logon session with an ID that is already in use.
1364L ERROR_NO_SUCH_PACKAGE
	A specified authentication package is unknown
1365L ERROR_BAD_LOGON_SESSION_STATE
	The logon session is not in a state the is consistent with the requested operation.
1366L ERROR_LOGON_SESSION_COLLISION
	The logon session is not in a state the is consistent with the requested operation. BUG, BUG – fix this message
1367L ERROR_INVALID_LOGON_TYPE
	Indicates an invalid value has been provided for LogonType has been requested.
1368L ERROR_CANNOT_IMPERSONATE
	Indicates that an attempt has been made to impersonate via a named pipe that has not yet been read from.
1369L ERROR_RXACT_INVALID_STATE
	Indicates that the transaction state of a registry sub-tree is incompatible with the requested operation. For example, a request has been made to start a new transaction with one already in progress, or a request to apply a transaction when one is not currently in progress. This status value is returned by the runtime library (RTL) registry transaction package (RXact).
1370L ERROR_RXACT_COMMIT_FAILURE
	Indicates an error has occurred during a registry transaction commit. The database has been left in an unknown, but probably inconsistent, state. The state of the registry transaction is left as COMMITTING. This status value is returned by the runtime library (RTL) registry transaction package (RXact).
1371L ERROR_SPECIAL_ACCOUNT
	Indicates an operation has been attempted on a built-in (special) SAM account which is incompatible with built-in accounts. For example, built-in accounts can not be re-named or deleted.
1372L ERROR_SPECIAL_GROUP
	The operation requested may not be performed on the specified group because it is a built-in special group.
1373L ERROR_SPECIAL_USER
	The operation requested may not be performed on the specified user because it is a built-in special user.
1374L ERROR_MEMBERS_PRIMARY_GROUP
	Indicates a member can not be removed from a group because the group is currently the member's primary group.
1375L ERROR_TOKEN_ALREADY_IN_USE
	An attempt was made to establish a token for use as a primary token but the token is already in use. A token can only be the primary token of one process at a time.
1376L ERROR_NO_SUCH_ALIAS
	The specified alias does not exist.
1377L ERROR_MEMBER_NOT_IN_ALIAS
	The specified account name is not a member of the alias.
1378L ERROR_MEMBER_IN_ALIAS
	The specified account name is not a member of the alias.
1379L ERROR_ALIAS_EXISTS
	The specified alias already exists.
1380L ERROR_LOGON_NOT_GRANTED
	A requested type of logon (e.g., Interactive, Network, Service) is not granted by the target system's local security policy. Please ask the system administrator to grant the necessary form of logon.
1381L ERROR_TOO_MANY_SECRETS
	The maximum number of secrets that may be stored in a single system has been exceeded. The length and number of secrets is limited to satisfy United States State Department export restrictions.
1382L ERROR_SECRET_TOO_LONG
	The length of an secret exceeds the maximum length allowed. The length and number of secrets is limited to satisfy United States State Department export restrictions.
1383L ERROR_INTERNAL_DB_ERROR
	The Local Security Authority (LSA) database contains in internal inconsistency.
1384L ERROR_TOO_MANY_CONTEXT_IDS
	During a logon attempt, the user's security context accumulated too many security IDs. This is a very unusual situation. Remove the user from some groups or aliases to reduce the number of security ids to incorporate into the security context.
1385L ERROR_LOGON_TYPE_NOT_GRANTED
	A user has requested a type of logon (e.g., interactive or network) that has not be granted. An administrator has control over who may logon interactively and through the network.
1386L ERROR_NT_CROSS_ENCRYPTION_REQUIRED
	An attempt was made to change a user password in the security account manager without providing the necessary NT cross-encrypted password.
1387L ERROR_NO_SUCH_MEMBER
	A new member could not be added to an alias because the member does not exist.
1388L ERROR_INVALID_MEMBER
	A new member could not be added to an alias because the member has the wrong account type.
1389L ERROR_TOO_MANY_SIDS
	Too many Sids have been specified.
1390L ERROR_LM_CROSS_ENCRYPTION_REQUIRED
	An attempt was made to change a user password in the security account manager without providing the necessary LM cross-encrypted password.
1391L ERROR_NO_INHERITANCE
	Indicates an ACL contains no inheritable components
1392L ERROR_FILE_CORRUPT
	The file or directory is corrupt and non-readable.
1393L ERROR_DISK_CORRUPT
	The disk structure is corrupt and non-readable.
1400L ERROR_INVALID_WINDOW_HANDLE
	Invalid window handle.
1401L ERROR_INVALID_MENU_HANDLE
	Invalid menu handle.
1402L ERROR_INVALID_CURSOR_HANDLE
	Invalid cursor handle.
1403L ERROR_INVALID_ACCEL_HANDLE
	Invalid accelerator-table handle.
1404L ERROR_INVALID_HOOK_HANDLE
	Invalid hook handle.
1405L ERROR_INVALID_DWP_HANDLE
	Invalid DeferWindowPos handle.
1406L ERROR_TLW_WITH_WSCHILD
	CreateWindow() failed, creating top-level window with WS_CHILD style.
1407L ERROR_CANNOT_FIND_WND_CLASS
	Cannot find window class.
1408L ERROR_WINDOW_OF_OTHER_THREAD
	Invalid window, belongs to other thread.
1409L ERROR_HOTKEY_ALREADY_REGISTERED
	Hotkey already registered.
1410L ERROR_CLASS_ALREADY_EXISTS
	Class already exists.
1411L ERROR_CLASS_DOES_NOT_EXIST
	Class does not exist.
1412L ERROR_CLASS_HAS_WINDOWS
	Class still has open windows.
1413L ERROR_INVALID_INDEX
	Invalid index.
1414L ERROR_INVALID_ICON_HANDLE
	Invalid icon handle.
1415L ERROR_PRIVATE_DIALOG_INDEX
	Using private DIALOG window words.
1416L ERROR_LISTBOX_ID_NOT_FOUND
	Listbox ID not found.
1417L ERROR_NO_WILDCARD_CHARACTERS
	No wildcard characters found.
1418L ERROR_CLIPBOARD_NOT_OPEN
	Thread doesn't have clipboard open.
1419L ERROR_HOTKEY_NOT_REGISTERED
	Hotkey not registered.
1420L ERROR_WINDOW_NOT_DIALOG
	The window is not a valid dialog window.
1421L ERROR_CONTROL_ID_NOT_FOUND
	Control ID not found.
1422L ERROR_INVALID_COMBOBOX_MESSAGE
	Invalid Message, combobox doesn't have an edit control.
1423L ERROR_WINDOW_NOT_COMBOBOX
	The window is not a combobox.
1424L ERROR_INVALID_EDIT_HEIGHT
	Height must be less than 256.
1425L ERROR_DC_NOT_FOUND
	Invalid HDC passed to ReleaseDC.
1426L ERROR_INVALID_HOOK_FILTER
	Invalid hook filter type.
1427L ERROR_INVALID_FILTER_PROC
	Invalid filter proc.
1428L ERROR_HOOK_NEEDS_HMOD
	Cannot set non-local hook without an module handle.
1429L ERROR_GLOBAL_ONLY_HOOK
	This hook can only be set globally.
1430L ERROR_JOURNAL_HOOK_SET
	The journal hook is already installed.
1431L ERROR_HOOK_NOT_INSTALLED
	Hook not installed.
1432L ERROR_INVALID_LB_MESSAGE
	Invalid message for single-selection listbox.
1433L ERROR_SETCOUNT_ON_BAD_LB
	LB_SETCOUNT sent to non-lazy listbox.
1434L ERROR_LB_WITHOUT_TABSTOPS
	This listbox doesn't support tab stops.
1435L ERROR_DESTROY_OBJECT_OF_OTHER_THREAD
	Cannot destroy object created by another thread.
1436L ERROR_CHILD_WINDOW_MENU
	Child windows can't have menus.
1437L ERROR_NO_SYSTEM_MENU
	Window doesn't have system menu.
1438L ERROR_INVALID_MSGBOX_STYLE
	Invalid message box style.
1439L ERROR_INVALID_SPI_VALUE
	Invalid SPI_* parameter.
1440L ERROR_SCREEN_ALREADY_LOCKED
	Screen already locked.
1441L ERROR_HWNDS_HAVE_DIFFERENT_PARENT
	All DeferWindowPos() HWNDs must have same parent.
1442L ERROR_NOT_CHILD_WINDOW
	Window is not a child window.
1443L ERROR_INVALID_GW_COMMAND
	Invalid GW_* command.
1444L ERROR_INVALID_THREAD_ID
	Invalid thread ID.
1445L ERROR_NON_MDICHILD_WINDOW
	DefMDIChildProc() called with a non-MDIChild window.
1446L ERROR_POPUP_ALREADY_ACTIVE
	Popup menu already active.
1447L ERROR_NO_SCROLLBARS
	Window does not have scrollbars.
1448L ERROR_INVALID_SCROLLBAR_RANGE
	Scrollbar range greater than 0x7FFF.
1449L ERROR_INVALID_SHOWWIN_COMMAND
	Invalid ShowWindow() command.
1500L ERROR_EVENTLOG_FILE_CORRUPT
	One of the Eventlog logfiles has been corrupted.
1700L RPC_S_INVALID_STRING_BINDING
	The string binding is invalid.
1701L RPC_S_WRONG_KIND_OF_BINDING
	The binding handle is not the correct type.
1702L RPC_S_INVALID_BINDING
	The binding handle is invalid.
1703L RPC_S_PROTSEQ_NOT_SUPPORTED
	The Rpc protocol sequence is not supported.
1704L RPC_S_INVALID_RPC_PROTSEQ
	The rpc protocol sequence is invalid.
1705L RPC_S_INVALID_STRING_UUID
	The string uuid is invalid.
1706L RPC_S_INVALID_ENDPOINT_FORMAT
	The endpoint format is invalid.
1707L RPC_S_INVALID_NET_ADDR
	The network address is invalid.
1708L RPC_S_NO_ENDPOINT_FOUND
	No endpoint was found.
1709L RPC_S_INVALID_TIMEOUT
	The timeout value is invalid.
1710L RPC_S_OBJECT_NOT_FOUND
	The object uuid was not found.
1711L RPC_S_ALREADY_REGISTERED
	The object uuid has already been registered.
1712L RPC_S_TYPE_ALREADY_REGISTERED
	The type uuid has already been registered.
1713L RPC_S_ALREADY_LISTENING
	The server is already listening.
1714L RPC_S_NO_PROTSEQS_REGISTERED
	No protocol sequences have been registered.
1715L RPC_S_NOT_LISTENING
	The server is not listening.
1716L RPC_S_UNKNOWN_MGR_TYPE
	The manager type is unknown.
1717L RPC_S_UNKNOWN_IF
	The interface is unknown.
1718L RPC_S_NO_BINDINGS
	There are no bindings.
1719L RPC_S_NO_PROTSEQS
	There are no protocol sequences.
1720L RPC_S_CANT_CREATE_ENDPOINT
	The endpoint can not be created.
1721L RPC_S_OUT_OF_RESOURCES
	Not enough resources are available to complete this operation.
1722L RPC_S_SERVER_UNAVAILABLE
	The server is unavailable.
1723L RPC_S_SERVER_TOO_BUSY
	The server is too busy to complete this operation.
1724L RPC_S_INVALID_NETWORK_OPTIONS
	The network options are invalid.
1725L RPC_S_NO_CALL_ACTIVE
	There is not a remote procedure call active in this thread.
1726L RPC_S_CALL_FAILED
	The remote procedure call failed.
1727L RPC_S_CALL_FAILED_DNE
	The remote procedure call failed and did not execute.
1728L RPC_S_PROTOCOL_ERROR
	An rpc protocol error occurred.
1729L RPC_S_CANNOT_BIND
	An attempt to bind with the server failed.
1730L RPC_S_UNSUPPORTED_TRANS_SYN
	The transfer syntax is not supported by the server.
1731L RPC_S_SERVER_OUT_OF_MEMORY
	The server has insufficient memory to complete this operation.
1732L RPC_S_UNSUPPORTED_TYPE
	The type uuid is not supported.
1733L RPC_S_INVALID_TAG
	The tag is invalid.
1734L RPC_S_INVALID_BOUND
	The array bounds are invalid.
1735L RPC_S_NO_ENTRY_NAME
	The binding does not contain an entry name.
1736L RPC_S_INVALID_NAME_SYNTAX
	The name syntax is invalid.
1737L RPC_S_UNSUPPORTED_NAME_SYNTAX
	The name syntax is not supported.
1738L RPC_S_SERVER_NOT_LISTENING
	The server is not listening for remote procedure calls.
1739L RPC_S_UUID_NO_ADDRESS
	No network address is available to use to construct a uuid.
1740L RPC_S_DUPLICATE_ENDPOINT
	The endpoint is a duplicate.
1741L RPC_S_UNKNOWN_AUTHN_TYPE
	The authentication type is unknown.
1742L RPC_S_MAX_CALLS_TOO_SMALL
	The maximum number of calls is too small.
1743L RPC_S_STRING_TOO_LONG
	The string is too long.
1744L RPC_S_PROTSEQ_NOT_FOUND
	The rpc protocol sequence was not found.
1745L RPC_S_PROCNUM_OUT_OF_RANGE
	The procedure number is out of range.
1746L RPC_S_BINDING_HAS_NO_AUTH
	The binding does not contain any authentication information.
1747L RPC_S_UNKNOWN_AUTHN_SERVICE
	The authentication service is unknown.
1748L RPC_S_UNKNOWN_AUTHN_LEVEL
	The authentication level is unknown.
1749L RPC_S_INVALID_AUTH_IDENTITY
	The security context is invalid.
1750L RPC_S_UNKNOWN_AUTHZ_SERVICE
	The authorization service is unknown.
1751L EPT_S_INVALID_ENTRY
	The entry is invalid.
1752L EPT_S_CANT_PERFORM_OP
	The operation can not be performed.
1753L EPT_S_NOT_REGISTERED
	There are no more endpoints available from the endpoint mapper.
1754L RPC_S_NO_INTERFACES_EXPORTED
	No interfaces have been exported.
1755L RPC_S_INCOMPLETE_NAME
	The entry name is incomplete.
1756L RPC_S_INVALID_VERS_OPTION
	The version option is invalid.
1757L RPC_S_NO_MORE_MEMBERS
	There are no more members.
1758L RPC_S_NOTHING_TO_UNEXPORT
	There is nothing to unexport.
1759L RPC_S_INTERFACE_NOT_FOUND
	The interface was not found.
1760L RPC_S_ENTRY_ALREADY_EXISTS
	The entry already exists.
1761L RPC_S_ENTRY_NOT_FOUND
	The entry is not found.
1762L RPC_S_NAME_SERVICE_UNAVAILABLE
	The name service is unavailable.
1763L RPC_S_INVALID_NAF_IF
	The network address family is invalid.
1764L RPC_S_CANNOT_SUPPORT
	The requested operation is not supported.
1765L RPC_S_NO_CONTEXT_AVAILABLE
	No security context is available to allow impersonation.
1766L RPC_S_INTERNAL_ERROR
	An internal error occurred in rpc.
1767L RPC_S_ZERO_DIVIDE
	The server attempted an integer divide by zero.
1768L RPC_S_ADDRESS_ERROR
	An addressing error occurred in the server.
1769L RPC_S_FP_DIV_ZERO
	A floating point operation at the server caused a divide by zero.
1770L RPC_S_FP_UNDERFLOW
	A floating point underflow occurred at the server.
1771L RPC_S_FP_OVERFLOW
	A floating point overflow occurred at the server.
1772L RPC_X_NO_MORE_ENTRIES
	The list of servers available for auto_handle binding has been exhausted.
1773L RPC_X_SS_CHAR_TRANS_OPEN_FAIL
	The file designated by DCERPCCHARTRANS cannot be opened.
1774L RPC_X_SS_CHAR_TRANS_SHORT_FILE
	The file containing the character translation table has fewer than 512 bytes.
1775L RPC_X_SS_IN_NULL_CONTEXT
	A null context handle is passed as an [in] parameter.
1776L RPC_X_SS_CONTEXT_MISMATCH
	The context handle does not match any known context handles.
1777L RPC_X_SS_CONTEXT_DAMAGED
	The context handle changed during a call.
1778L RPC_X_SS_HANDLES_MISMATCH
	The binding handles passed to a remote procedure call do not match.
1779L RPC_X_SS_CANNOT_GET_CALL_HANDLE
	The stub is unable to get the call handle.
1780L RPC_X_NULL_REF_POINTER
	A null reference pointer was passed to the stub.
1781L RPC_X_ENUM_VALUE_OUT_OF_RANGE
	The enumeration value is out of range.
1782L RPC_X_BYTE_COUNT_TOO_SMALL
	The byte count is too small
1783L RPC_X_BAD_STUB_DATA
	The stub received bad data.
1784L ERROR_INVALID_USER_BUFFER
	The supplied user buffer is not valid for the requested operation.
1785L ERROR_UNRECOGNIZED_MEDIA
	The disk media is not recognized. It may not be formatted.