TENANT.CPP
/*
* TENANT.CPP
* Patron Chapter 22
*
* Implementation of the CTentant class which holds information
* for a single object on a page. It maintains position, references
* to data, and a storage.
*
* Copyright (c)1993-1995 Microsoft Corporation, All Rights Reserved
*
* Kraig Brockschmidt, Microsoft
* Internet : kraigb@microsoft.com
* Compuserve: >INTERNET:kraigb@microsoft.com
*/
#include "patron.h"
/*
* CTenant::CTenant
* CTenant::~CTenant
*
* Constructor Parameters:
* dwID DWORD identifier for this page.
* hWnd HWND of the pages window.
* pPG PCPages to the parent structure.
*/
CTenant::CTenant(DWORD dwID, HWND hWnd, PCPages pPG)
{
m_hWnd=hWnd;
m_dwID=dwID;
m_fInitialized=0;
m_pIStorage=NULL;
m_cOpens=0;
m_pObj=NULL;
m_pPG =pPG;
m_clsID=CLSID_NULL;
m_fSetExtent=FALSE;
m_cRef=0;
m_pIOleObject=NULL;
m_pIViewObject2=NULL;
m_grfMisc=0;
m_pImpIOleClientSite=NULL;
m_pImpIAdviseSink=NULL;
m_fRepaintEnabled=TRUE;
m_pmkFile=NULL;
m_fLinkAvail=TRUE; //Checked on Load
m_pmk=NULL;
//CHAPTER22MOD
m_pImpIOleIPSite=NULL;
m_pIOleIPObject=NULL;
m_rcPos.left=-1;
m_fInRectSet=FALSE;
//End CHAPTER22MOD
return;
}
CTenant::~CTenant(void)
{
ReleaseInterface(m_pmk);
ReleaseInterface(m_pmkFile);
//Object pointers cleaned up in Close.
//We delete our own interfaces since we control them
//CHAPTER22MOD
DeleteInterfaceImp(m_pImpIOleIPSite);
//End CHAPTER22MOD
DeleteInterfaceImp(m_pImpIAdviseSink);
DeleteInterfaceImp(m_pImpIOleClientSite);
return;
}
/*
* CTenant::QueryInterface
* CTenant::AddRef
* CTenant::Release
*
* Purpose:
* IUnknown members for CTenant object.
*/
STDMETHODIMP CTenant::QueryInterface(REFIID riid, PPVOID ppv)
{
*ppv=NULL;
if (IID_IUnknown==riid)
*ppv=this;
if (IID_IOleClientSite==riid)
*ppv=m_pImpIOleClientSite;
if (IID_IAdviseSink==riid)
*ppv=m_pImpIAdviseSink;
//CHAPTER22MOD
if (IID_IOleWindow==riid || IID_IOleInPlaceSite==riid)
*ppv=m_pImpIOleIPSite;
//End CHAPTER22MOD
if (NULL!=*ppv)
{
((LPUNKNOWN)*ppv)->AddRef();
return NOERROR;
}
return ResultFromScode(E_NOINTERFACE);
}
STDMETHODIMP_(ULONG) CTenant::AddRef(void)
{
return ++m_cRef;
}
STDMETHODIMP_(ULONG) CTenant::Release(void)
{
if (0!=--m_cRef)
return m_cRef;
delete this;
return 0;
}
/*
* CTenant::GetID
*
* Return Value:
* DWORD dwID field in this tenant.
*/
DWORD CTenant::GetID(void)
{
return m_dwID;
}
/*
* CTenant::GetStorageName
*
* Parameters:
* pszName LPOLESTR to a buffer in which to store the storage
* name for this tenant.
*
* Return Value:
* UINT Number of characters stored.
*/
UINT CTenant::GetStorageName(LPOLESTR pszName)
{
#ifdef WIN32ANSI
char szTemp[32];
UINT cch;
cch=wsprintf(szTemp, "Tenant %lu", m_dwID);
MultiByteToWideChar(CP_ACP, 0, szTemp, -1, pszName, 32);
return cch;
#else
return wsprintf(pszName, TEXT("Tenant %lu"), m_dwID);
#endif
}
/*
* CTenant::StorageGet
*
* Purpose:
* Returns the IStorage pointer maintained by this tenant,
* AddRef'd of course.
*
* Parameters:
* ppStg LPSTORAGE * in which to return the pointer.
*
* Return Value:
* None
*/
void CTenant::StorageGet(LPSTORAGE *ppStg)
{
if (NULL==ppStg)
return;
*ppStg=m_pIStorage;
if (NULL!=*ppStg)
(*ppStg)->AddRef();
return;
}
/*
* CTenant::Create
*
* Purpose:
* Creates a new tenant of the given CLSID, which can be either a
* static bitmap or metafile or any compound document object.
*
* Parameters:
* tType TENANTTYPE to create, either a static metafile,
* bitmap, or some kind of compound document object
* This determines which OleCreate* call we use.
* pvType LPVOID providing the relevant pointer from which
* to create the tenant, depending on iType.
* pFE LPFORMATETC specifying the type of renderings
* to use.
* pptl PPOINTL in which we store offset coordinates.
* pszl LPSIZEL where this object should store its
* lometric extents.
* pIStorage LPSTORAGE of the page we live in. We have to
* create another storage in this for the tenant.
* ppo PPATRONOBJECT containing placement data.
* dwData DWORD with extra data, sensitive to iType.
*
* Return Value:
* UINT A CREATE_* value depending on what we
* actually do.
*/
UINT CTenant::Create(TENANTTYPE tType, LPVOID pvType
, LPFORMATETC pFE, PPOINTL pptl, LPSIZEL pszl
, LPSTORAGE pIStorage, PPATRONOBJECT ppo, DWORD dwData)
{
HRESULT hr;
LPUNKNOWN pObj;
UINT uRet=CREATE_GRAPHICONLY;
if (NULL==pvType || NULL==pIStorage)
return CREATE_FAILED;
//Fail if this is called for an already living tenant.
if (m_fInitialized)
return CREATE_FAILED;
m_fInitialized=TRUE;
//Create a new storage for this tenant.
if (!Open(pIStorage))
return CREATE_FAILED;
/*
* Get the placement info if it's here. We either have a non-
* NULL PPATRONOBJECT in ppo or we have to use default
* placement and retrieve the size from the object itself.
*/
pszl->cx=0;
pszl->cy=0;
if (NULL!=ppo)
{
*pFE=ppo->fe;
*pptl=ppo->ptl;
*pszl=ppo->szl; //Could be 0,0 , so we ask object
uRet=CREATE_PLACEDOBJECT;
}
hr=ResultFromScode(E_FAIL);
//Now create an object based specifically for the type.
switch (tType)
{
case TENANTTYPE_NULL:
break;
case TENANTTYPE_STATIC:
/*
* We could use OleCreateStaticFromData here which does
* pretty much what we're doing below. However, it does
* not allow us to control whether we paste a bitmap or
* a metafile--it uses metafile first, bitmap second.
* For this reason we'll use code developed in Chapter
* 11's FreeLoader to affect the paste.
*/
hr=CreateStatic((LPDATAOBJECT)pvType, pFE, &pObj);
break;
case TENANTTYPE_EMBEDDEDOBJECT:
hr=OleCreate(*((LPCLSID)pvType), IID_IUnknown
, OLERENDER_DRAW, NULL, NULL, m_pIStorage
, (PPVOID)&pObj);
break;
case TENANTTYPE_EMBEDDEDFILE:
hr=OleCreateFromFile(CLSID_NULL, (LPTSTR)pvType
, IID_IUnknown, OLERENDER_DRAW, NULL, NULL
, m_pIStorage, (PPVOID)&pObj);
break;
case TENANTTYPE_EMBEDDEDOBJECTFROMDATA:
hr=OleCreateFromData((LPDATAOBJECT)pvType, IID_IUnknown
, OLERENDER_DRAW, NULL, NULL, m_pIStorage
, (PPVOID)&pObj);
break;
case TENANTTYPE_LINKEDFILE:
hr=OleCreateLinkToFile((LPTSTR)pvType, IID_IUnknown
, OLERENDER_DRAW, NULL, NULL, m_pIStorage
, (PPVOID)&pObj);
break;
case TENANTTYPE_LINKEDOBJECTFROMDATA:
hr=OleCreateLinkFromData((LPDATAOBJECT)pvType
, IID_IUnknown, OLERENDER_DRAW, NULL, NULL
, m_pIStorage, (PPVOID)&pObj);
break;
default:
break;
}
//If creation didn't work, get rid of the element Open created.
if (FAILED(hr))
{
Destroy(pIStorage);
return CREATE_FAILED;
}
//We don't get the size if PatronObject data was seen already.
if (!ObjectInitialize(pObj, pFE, dwData))
{
Destroy(pIStorage);
return CREATE_FAILED;
}
if (0==pszl->cx && 0==pszl->cy)
{
SIZEL szl;
//Try to get the real size of the object, default to 2"*2"
SETSIZEL((*pszl), 2*LOMETRIC_PER_INCH, 2*LOMETRIC_PER_INCH);
hr=ResultFromScode(E_FAIL);
//Try IViewObject2 first, then IOleObject as a backup.
if (NULL!=m_pIViewObject2)
{
hr=m_pIViewObject2->GetExtent(m_fe.dwAspect, -1, NULL
, &szl);
}
else
{
if (NULL!=m_pIOleObject)
hr=m_pIOleObject->GetExtent(m_fe.dwAspect, &szl);
}
if (SUCCEEDED(hr))
{
//Convert HIMETRIC to our LOMETRIC mapping
SETSIZEL((*pszl), szl.cx/10, szl.cy/10);
}
}
return uRet;
}
/*
* CTenant::Load
*
* Purpose:
* Recreates the object living in this tenant in place of calling
* FCreate. This is used in loading as opposed to new creation.
*
* Parameters:
* pIStorage LPSTORAGE of the page we live in.
* pti PTENTANTINFO containing persistent information.
* The ID value in this structure is ignored.
*
* Return Value:
* BOOL TRUE if successful, FALSE otherwise.
*/
BOOL CTenant::Load(LPSTORAGE pIStorage, PTENANTINFO pti)
{
HRESULT hr;
LPUNKNOWN pObj;
DWORD dwState=TENANTSTATE_DEFAULT;
if (NULL==pIStorage || NULL==pti)
return FALSE;
/*
* If we already initialized once, clean up, releasing
* everything before we attempt to reload. This happens
* when using the Convert Dialog.
*/
if (m_fInitialized)
{
//Preserve all states except open
dwState=(m_dwState & ~TENANTSTATE_OPEN);
m_cRef++; //Prevent accidental closure
//This should release all holds on our IStorage as well.
if (NULL!=m_pIViewObject2)
{
m_pIViewObject2->SetAdvise(m_fe.dwAspect, 0, NULL);
ReleaseInterface(m_pIViewObject2);
}
ReleaseInterface(m_pIOleObject);
ReleaseInterface(m_pObj);
m_pIStorage=NULL; //We'll have already released this.
m_cRef--; //Match safety increment above.
}
m_fInitialized=TRUE;
//Open the storage for this tenant.
if (!Open(pIStorage))
return FALSE;
/*
* NOTE: If you do not pass an IOleClientSite to OleLoad
* it will not automatically reconnect a linked object to
* the running source via IOleLink::BindIfRunning. Since
* we do not pass m_pImpIOleClientSite here, we'll call
* BindIfRunning ourselves in ObjectInitialize.
*/
hr=OleLoad(m_pIStorage, IID_IUnknown, NULL, (PPVOID)&pObj);
if (FAILED(hr))
{
Destroy(pIStorage);
return FALSE;
}
m_fSetExtent=pti->fSetExtent;
ObjectInitialize(pObj, &pti->fe, NULL);
//Restore the original state before reloading.
m_dwState=dwState;
RectSet(&pti->rcl, FALSE, FALSE);
//CHAPTER22MOD
/*
* If the object is ActiveWhenVisible, send it the
* OLEIVERB_INPLACEACTIVATE verb now.
*/
if ((m_grfMisc & OLEMISC_ACTIVATEWHENVISIBLE))
Activate(OLEIVERB_INPLACEACTIVATE, NULL);
//End CHAPTER22MOD
return TRUE;
}
/*
* CTenant::GetInfo
*
* Purpose:
* Retrieved a TENANTINFO structure for this tenant.
*
* Parameters:
* pti PTENANTINFO structure to fill
*
* Return Value:
* None
*/
void CTenant::GetInfo(PTENANTINFO pti)
{
if (NULL!=pti)
{
pti->dwID=m_dwID;
pti->rcl=m_rcl;
pti->fe=m_fe;
pti->fSetExtent=m_fSetExtent;
}
return;
}
/*
* CTenant::ObjectInitialize
* (Protected)
*
* Purpose:
* Performs operations necessary after creating an object or
* reloading one from storage.
*
* Parameters:
* pObj LPUNKNOWN of the object in this tenant.
* pFE LPFORMATETC describing the graphic here.
* dwData DWORD extra data. If pFE->dwAspect==
* DVASPECT_ICON then this is the iconic metafile.
*
* Return Value:
* BOOL TRUE if the function succeeded, FALSE otherwise.
*/
BOOL CTenant::ObjectInitialize(LPUNKNOWN pObj, LPFORMATETC pFE
, DWORD dwData)
{
HRESULT hr;
LPPERSIST pIPersist=NULL;
DWORD dw;
PCDocument pDoc;
TCHAR szFile[CCHPATHMAX];
LPOLELINK pIOleLink=NULL;
if (NULL==pObj || NULL==pFE)
return FALSE;
m_pObj=pObj;
m_fe=*pFE;
m_fe.ptd=NULL;
m_dwState=TENANTSTATE_DEFAULT;
/*
* Determine the type: Static or Embedded. If Static,
* this will have CLSID_Picture_Metafile or CLSID_Picture_Dib.
* Otherwise it's embedded. Later we'll add a case for links.
*/
m_tType=TENANTTYPE_EMBEDDEDOBJECT;
if (SUCCEEDED(pObj->QueryInterface(IID_IPersist
, (PPVOID)&pIPersist)))
{
CLSID clsid=CLSID_NULL;
hr=pIPersist->GetClassID(&clsid);
//If we don't have a CLSID, default to static
if (FAILED(hr) || CLSID_Picture_Metafile==clsid
|| CLSID_Picture_Dib==clsid)
m_tType=TENANTTYPE_STATIC;
pIPersist->Release();
}
//Check if this is a linked object.
if (SUCCEEDED(pObj->QueryInterface(IID_IOleLink
, (PPVOID)&pIOleLink)))
{
LPMONIKER pmk;
hr=pIOleLink->GetSourceMoniker(&pmk);
if (FAILED(hr) || NULL==pmk)
m_tType=TENANTTYPE_STATIC;
else
{
m_tType=TENANTTYPE_LINKEDOBJECT;
pmk->Release();
//Connect to the object if the source is running.
pIOleLink->BindIfRunning();
}
pIOleLink->Release();
}
m_pIViewObject2=NULL;
hr=pObj->QueryInterface(IID_IViewObject2
, (PPVOID)&m_pIViewObject2);
if (FAILED(hr))
return FALSE;
m_pIViewObject2->SetAdvise(m_fe.dwAspect, 0, m_pImpIAdviseSink);
//We need an IOleObject most of the time, so get one here.
m_pIOleObject=NULL;
hr=pObj->QueryInterface(IID_IOleObject
, (PPVOID)&m_pIOleObject);
/*
* Follow up object creation with advises and so forth. If
* we cannot get IOleObject here, then we know we can't do
* any IOleObject actions from here on--object is static.
*/
if (FAILED(hr))
return TRUE;
/*
* Get the MiscStatus bits and check for OLEMISC_ONLYICONIC.
* If set, force dwAspect in m_fe to DVASPECT_ICON so we
* remember to draw it properly and do extents right.
*/
m_pIOleObject->GetMiscStatus(m_fe.dwAspect, &m_grfMisc);
if (OLEMISC_ONLYICONIC & m_grfMisc)
m_fe.dwAspect=DVASPECT_ICON;
/*
* We could pass m_pImpIOleClientSite in an OleCreate* call, but
* since this function could be called after OleLoad, we still
* need to do this here, so it's always done here...
*/
m_pIOleObject->SetClientSite(m_pImpIOleClientSite);
m_pIOleObject->Advise(m_pImpIAdviseSink, &dw);
OleSetContainedObject(m_pIOleObject, TRUE);
/*
* For IOleObject::SetHostNames we need the application name
* and the document name (which is passed in the object
* parameter). The design of Patron doesn't give us nice
* structured access to the name of the document we're in, so
* I grab the parent of the Pages window (the document) and
* send it DOCM_PDOCUMENT which returns us the pointer.
* Roundabout, but it works.
*/
pDoc=(PCDocument)SendMessage(GetParent(m_hWnd), DOCM_PDOCUMENT
, 0, 0L);
if (NULL!=pDoc)
pDoc->FilenameGet(szFile, CCHPATHMAX);
else
szFile[0]=0;
NotifyOfRename(szFile, NULL, NULL);
/*
* If we're creating an iconic aspect object and we have
* an object from the Insert Object dialog, then we need to
* store that iconic presentation in the cache, handled
* with the utility function INOLE_SwitchDisplayAspect. In
* this case dwData is a handle to the metafile containing
* the icon. If dwData is NULL then we depend on the
* server to provide the aspect, in which case we need
* a view advise.
*/
if (DVASPECT_ICON & m_fe.dwAspect)
{
DWORD dw=DVASPECT_CONTENT;
IAdviseSink *pSink;
pSink=(NULL==dwData) ? NULL : m_pImpIAdviseSink;
INOLE_SwitchDisplayAspect(m_pIOleObject, &dw
, DVASPECT_ICON, (HGLOBAL)(UINT)dwData, FALSE
, (NULL!=dwData), pSink, NULL);
}
return TRUE;
}
/*
* CTenant::Open
*
* Purpose:
* Retrieves the IStorage associated with this tenant. The
* IStorage is owned by the tenant and thus the tenant always
* holds a reference count.
*
* If the storage is already open for this tenant, then this
* function will AddRef it; therefore the caller must always
* match an Open with a Close.
*
* Parameters:
* pIStorage LPSTORAGE above this tenant (which has its
* own storage).
*
* Return Value:
* BOOL TRUE if opening succeeds, FALSE otherwise.
*/
BOOL CTenant::Open(LPSTORAGE pIStorage)
{
HRESULT hr=NOERROR;
DWORD dwMode=STGM_TRANSACTED | STGM_READWRITE
| STGM_SHARE_EXCLUSIVE;
OLECHAR szTemp[32];
if (NULL==m_pIStorage)
{
if (NULL==pIStorage)
return FALSE;
/*
* Attempt to open the storage under this ID. If there is
* none, then create it. In either case we end up with an
* IStorage that we either save in pPage or release.
*/
GetStorageName(szTemp);
hr=pIStorage->OpenStorage(szTemp, NULL, dwMode, NULL, 0
, &m_pIStorage);
if (FAILED(hr))
{
hr=pIStorage->CreateStorage(szTemp, dwMode, 0, 0
, &m_pIStorage);
}
}
else
m_pIStorage->AddRef();
if (FAILED(hr))
return FALSE;
m_cOpens++;
//Create these if we don't have them already.
if (NULL==m_pImpIOleClientSite && NULL==m_pImpIAdviseSink)
{
m_pImpIOleClientSite=new CImpIOleClientSite(this, this);
m_pImpIAdviseSink=new CImpIAdviseSink(this, this);
//CHAPTER22MOD
m_pImpIOleIPSite=new CImpIOleInPlaceSite(this, this);
if (NULL==m_pImpIOleClientSite || NULL==m_pImpIAdviseSink
|| NULL==m_pImpIOleIPSite)
return FALSE;
//End CHAPTER22MOD
}
return TRUE;
}
/*
* CTenant::Close
*
* Purpose:
* Possibly commits the storage, then releases it reversing the
* reference count from Open. If the reference on the storage
* goes to zero, the storage is forgotten. However, the object we
* contain is still held and as long as it's active the storage
* remains alive.
*
* Parameters:
* fCommit BOOL indicating if we're to commit.
*
* Return Value:
* None
*/
void CTenant::Close(BOOL fCommit)
{
if (fCommit)
Update();
if (NULL!=m_pIStorage)
{
m_pIStorage->Release();
/*
* We can't use a zero reference count to know when to NULL
* this since other things might have AddRef'd the storage.
*/
if (0==--m_cOpens)
{
m_pIStorage=NULL;
//CHAPTER22MOD
//OnInPlaceDeactivate releases this pointer.
if (NULL!=m_pIOleIPObject)
m_pIOleIPObject->InPlaceDeactivate();
//End CHAPTER22MOD
//Close the object saving if necessary
if (NULL!=m_pIOleObject)
{
m_pIOleObject->Close(OLECLOSE_SAVEIFDIRTY);
ReleaseInterface(m_pIOleObject);
}
//Release all other held pointers
if (NULL!=m_pIViewObject2)
{
m_pIViewObject2->SetAdvise(m_fe.dwAspect, 0, NULL);
ReleaseInterface(m_pIViewObject2);
}
//We know we only hold one ref from Create or Load
ReleaseInterface(m_pObj);
}
}
return;
}
/*
* CTenant::Update
*
* Purpose:
* Forces a common on the page if it's open.
*
* Parameters:
* None
*
* Return Value:
* BOOL TRUE if the object is open, FALSE otherwise.
*/
BOOL CTenant::Update(void)
{
LPPERSISTSTORAGE pIPS;
if (NULL!=m_pIStorage)
{
/*
* We need to OleSave again because we might have changed
* the size or position of this tenant. We also need to
* save the rectangle on the page, since that's not known
* to OLE.
*/
m_pObj->QueryInterface(IID_IPersistStorage, (PPVOID)&pIPS);
//This fails for static objects...so we improvise if so
if (FAILED(OleSave(pIPS, m_pIStorage, TRUE)))
{
//This is essentially what OleSave does.
WriteClassStg(m_pIStorage, m_clsID);
pIPS->Save(m_pIStorage, TRUE);
}
pIPS->SaveCompleted(NULL);
pIPS->Release();
m_pIStorage->Commit(STGC_DEFAULT);
}
return FALSE;
}
/*
* CTenant::Destroy
*
* Purpose:
* Removes this page from the given storage. The caller should
* eventually delete this CTenant object to free the object herein.
* Nothing is committed when being destroyed.
*
* Parameters:
* pIStorage LPSTORAGE contianing this page on which to call
* DestroyElement
*
* Return Value:
* None
*/
void CTenant::Destroy(LPSTORAGE pIStorage)
{
OLECHAR szTemp[32];
if (NULL!=pIStorage)
{
if (NULL!=m_pIOleObject)
{
//CHAPTER22MOD
DeactivateInPlaceObject(TRUE);
//End CHAPTER22MOD
m_pIOleObject->Close(OLECLOSE_NOSAVE);
}
if (NULL!=m_pIStorage)
{
//Remove all reference/open counts on this storage.
while (0!=m_cOpens)
{
m_pIStorage->Release();
m_cOpens--;
}
}
GetStorageName(szTemp);
pIStorage->DestroyElement(szTemp);
m_pIStorage=NULL;
}
return;
}
/*
* CTenant::Select
*
* Purpose:
* Selects or deselects the tenant.
*
* Parameters:
* fSelect BOOL indicating the new state of the tenant.
* fActivate BOOL indicating whether to activate or
* deactivate an in-place object. If TRUE, then
* activation/deactivation will happen. If
* FALSE, no change in activation takes place.
*
* Return Value:
* None
*/
//CHAPTER22MOD
void CTenant::Select(BOOL fSelect, BOOL fActivate)
//End CHAPTER22MOD
{
BOOL fWasSelected;
DWORD dwState;
RECT rc;
HDC hDC;
fWasSelected=(BOOL)(TENANTSTATE_SELECTED & m_dwState);
//Nothing to do when there's no change.
if (fWasSelected==fSelect)
return;
dwState=m_dwState & ~TENANTSTATE_SELECTED;
m_dwState=dwState | ((fSelect) ? TENANTSTATE_SELECTED : 0);
/*
* Draw sizing handles to show the selection state. We convert
* things to MM_TEXT since that's what this function expects.
*/
RECTFROMRECTL(rc, m_rcl);
RectConvertMappings(&rc, NULL, TRUE);
OffsetRect(&rc, -(int)m_pPG->m_xPos, -(int)m_pPG->m_yPos);
hDC=GetDC(m_hWnd);
UIDrawHandles(&rc, hDC, UI_HANDLES_INSIDE
| UI_HANDLES_NOBORDER | UI_HANDLES_USEINVERSE
, CXYHANDLE, !fWasSelected);
ReleaseDC(m_hWnd, hDC);
if (fSelect)
m_pPG->m_fDirty=TRUE;
//CHAPTER22MOD
if (fActivate)
{
if (!fSelect)
DeactivateInPlaceObject(FALSE);
else
{
if (m_grfMisc & OLEMISC_INSIDEOUT)
{
MSG msg;
DWORD dw;
//Include a message for in-place objects.
msg.hwnd=NULL;
msg.message=WM_LBUTTONDOWN;
msg.wParam=0;
msg.time=GetMessageTime();
dw=GetMessagePos();
msg.lParam=dw;
SETPOINT(msg.pt, LOWORD(dw), HIWORD(dw));
Activate(OLEIVERB_UIACTIVATE, &msg);
}
}
}
//End CHAPTER22MOD
return;
}
/*
* CTenant::ShowAsOpen
*
* Purpose:
* Draws or removes the hatch pattern over an object.
*
* Parameters:
* fOpen BOOL indicating the open state of this tenant.
*
* Return Value:
* None
*/
void CTenant::ShowAsOpen(BOOL fOpen)
{
BOOL fWasOpen;
DWORD dwState;
RECT rc;
HDC hDC;
fWasOpen=(BOOL)(TENANTSTATE_OPEN & m_dwState);
dwState=m_dwState & ~TENANTSTATE_OPEN;
m_dwState=dwState | ((fOpen) ? TENANTSTATE_OPEN : 0);
//If this was not open, then just hatch, otherwise repaint.
if (!fWasOpen && fOpen)
{
RECTFROMRECTL(rc, m_rcl);
RectConvertMappings(&rc, NULL, TRUE);
OffsetRect(&rc, -(int)m_pPG->m_xPos, -(int)m_pPG->m_yPos);
hDC=GetDC(m_hWnd);
UIDrawShading(&rc, hDC, UI_SHADE_FULLRECT, 0);
ReleaseDC(m_hWnd, hDC);
}
if (fWasOpen && !fOpen)
Repaint();
return;
}
/*
* CTenant::ShowYourself
*
* Purpose:
* Function that really just implements IOleClientSite::ShowObject.
* Here we first check if the tenant is fully visible, and if so,
* then nothing needs to happen. Otherwise, if the upper left
* corner of the tenant is in the upper left visible quadrant of
* the window, we'll also consider ourselves done. Otherwise
* we'll put the upper left corner of the object at the upper left
* corner of the window.
*
* Parameters:
* None
*
* Return Value:
* None
*/
void CTenant::ShowYourself(void)
{
RECTL rcl;
RECT rc;
POINT pt1, pt2;
//Scrolling deals in device units; get our rectangle in those.
RectGet(&rcl, TRUE);
//Get the window rectangle offset for the current scroll pos.
GetClientRect(m_hWnd, &rc);
OffsetRect(&rc, m_pPG->m_xPos, m_pPG->m_yPos);
//Check if the object is already visible. (macro in bookguid.h)
SETPOINT(pt1, (int)rcl.left, (int)rcl.top);
SETPOINT(pt2, (int)rcl.right, (int)rcl.bottom);
//CHAPTER22MOD
/*
* If we're doing in-place, don't move anything if the
* object is visible AT ALL. IOleInPlaceSite::OnInPlaceActivate
* will have been called by now--the object will always
* make that call before showing itself.
*/
if (NULL!=m_pIOleIPObject && PtInRect(&rc, pt1))
return;
//End CHAPTER22MOD
if (PtInRect(&rc, pt1) && PtInRect(&rc, pt2))
return;
//Check if the upper left is within the upper left quadrant
if (((int)rcl.left > rc.left
&& (int)rcl.left < ((rc.right+rc.left)/2))
&& ((int)rcl.top > rc.top
&& (int)rcl.top < ((rc.bottom+rc.top)/2)))
return;
//These are macros in INC\BOOK1632.H
SendScrollPosition(m_hWnd, WM_HSCROLL, rcl.left-8);
SendScrollPosition(m_hWnd, WM_VSCROLL, rcl.top-8);
return;
}
/*
* CTenant::AddVerbMenu
*
* Purpose:
* Creates the variable verb menu item for the object in this
* tenant.
*
* Parmeters:
* hMenu HMENU on which to add items.
* iPos UINT position on that menu to add items.
*
* Return Value:
* None
*/
void CTenant::AddVerbMenu(HMENU hMenu, UINT iPos)
{
HMENU hMenuTemp;
LPOLEOBJECT pObj=m_pIOleObject;
//If we're static, say we have no object.
if (TENANTTYPE_STATIC==m_tType)
pObj=NULL;
OleUIAddVerbMenu(pObj, NULL, hMenu, iPos, IDM_VERBMIN
, IDM_VERBMAX, TRUE, IDM_EDITCONVERT, &hMenuTemp);
return;
}
/*
* CTenant::TypeGet
*
* Purpose:
* Returns the type of this tenant
*
* Parameters:
* None
*
* Return Value:
* TENANTTYPE Type of the tenant.
*/
TENANTTYPE CTenant::TypeGet(void)
{
return m_tType;
}
/*
* CTenant::CopyEmbeddedObject
*
* Purpose:
* Copies an embedded object to the given data object (via SetData,
* assuming this is a data transfer object for clipboard/drag-drop)
* if that's what we're holding.
*
* Parameters:
* pIDataObject LPDATAOBJECT in which to store the copy.
* pFE LPFORMATETC into which to copy CFSTR_EMBEDDEDOBJECT
* if we put that in the data object.
* pptl PPOINTL to the pick point (NULL outside of
* drag-drop);
*
* Return Value:
* None
*/
void CTenant::CopyEmbeddedObject(LPDATAOBJECT pIDataObject
, LPFORMATETC pFE, PPOINTL pptl)
{
LPPERSISTSTORAGE pIPS;
STGMEDIUM stm;
FORMATETC fe;
HRESULT hr;
UINT cf;
POINTL ptl;
SIZEL szl;
//Can only copy embeddings.
if (TENANTTYPE_EMBEDDEDOBJECT!=m_tType || NULL==m_pIOleObject)
return;
if (NULL==pptl)
{
SETPOINTL(ptl, 0, 0);
pptl=&ptl;
}
/*
* Create CFSTR_EMBEDDEDOBJECT. This is simply an IStorage with
* a copy of the embedded object in it. The not-so-simple part
* is getting an IStorage to stuff it in. For this operation
* we'll use a temporary compound file.
*/
stm.pUnkForRelease=NULL;
stm.tymed=TYMED_ISTORAGE;
hr=StgCreateDocfile(NULL, STGM_TRANSACTED | STGM_READWRITE
| STGM_CREATE| STGM_SHARE_EXCLUSIVE | STGM_DELETEONRELEASE
, 0, &stm.pstg);
if (FAILED(hr))
return;
m_pObj->QueryInterface(IID_IPersistStorage, (PPVOID)&pIPS);
if (NOERROR==pIPS->IsDirty())
{
OleSave(pIPS, stm.pstg, FALSE);
pIPS->SaveCompleted(NULL);
}
else
m_pIStorage->CopyTo(0, NULL, NULL, stm.pstg);
pIPS->Release();
//stm.pstg now has a copy, so stuff it away.
cf=RegisterClipboardFormat(CFSTR_EMBEDDEDOBJECT);
SETDefFormatEtc(fe, cf, TYMED_ISTORAGE);
if (SUCCEEDED(pIDataObject->SetData(&fe, &stm, TRUE)))
*pFE=fe;
else
ReleaseStgMedium(&stm);
stm.tymed=TYMED_HGLOBAL;
/*
* You want to make sure that if this object is iconic, that you
* create the object descriptor with DVASPECT_ICON instead of
* the more typical DVASPECT_CONTENT. Also remember that
* the pick point is in HIMETRIC.
*/
XformSizeInPixelsToHimetric(NULL, (LPSIZEL)pptl, (LPSIZEL)&ptl);
SETSIZEL(szl, (10*(m_rcl.right-m_rcl.left))
, (10 * (m_rcl.bottom-m_rcl.top)));
stm.hGlobal=INOLE_ObjectDescriptorFromOleObject
(m_pIOleObject, m_fe.dwAspect, ptl, &szl);
cf=RegisterClipboardFormat(CFSTR_OBJECTDESCRIPTOR);
SETDefFormatEtc(fe, cf, TYMED_HGLOBAL);
if (FAILED(pIDataObject->SetData(&fe, &stm, TRUE)))
ReleaseStgMedium(&stm);
return;
}
/*
* CTenant::CopyLinkedObject
*
* Purpose:
* Copies an linked object to the given data object (via SetData,
* assuming this is a data transfer object for clipboard/drag-drop)
* if that's what we're holding.
*
* Parameters:
* pIDataObject LPDATAOBJECT in which to store the copy.
* pFE LPFORMATETC into which to copy CF_LINKSOURCE
* if we put that in the data object.
* pptl PPOINTL to the pick point (NULL outside of
* drag-drop);
*
* Return Value:
* None
*/
void CTenant::CopyLinkedObject(LPDATAOBJECT pIDataObject
, LPFORMATETC pFE, PPOINTL pptl)
{
STGMEDIUM stm;
FORMATETC fe;
HRESULT hr;
UINT cf;
POINTL ptl;
LPMONIKER pmk;
CLSID clsID;
LPTSTR psz=NULL;
SIZEL szl;
//Can only copy links to embeddings from here.
if (TENANTTYPE_EMBEDDEDOBJECT!=m_tType || NULL==m_pIOleObject)
return;
//If we don't have a full moniker, no linking allowed
if (NULL==m_pmk)
return;
//If the object doesn't support this, return.
if (OLEMISC_CANTLINKINSIDE & m_grfMisc)
return;
if (NULL==pptl)
{
SETPOINTL(ptl, 0, 0);
pptl=&ptl;
}
/*
* We need to get CFSTR_LINKSOURCE, but the server may not be
* running, in which case we just grab the moniker and CLSID
* for this object and call INOLE_GetLinkSourceData.
*/
m_pIOleObject->GetUserClassID(&clsID);
hr=m_pIOleObject->GetMoniker(0, OLEWHICHMK_OBJFULL, &pmk);
if (FAILED(hr))
return;
stm.pUnkForRelease=NULL;
stm.tymed=TYMED_NULL;
cf=RegisterClipboardFormat(CFSTR_LINKSOURCE);
SETDefFormatEtc(fe, cf, TYMED_ISTREAM);
hr=INOLE_GetLinkSourceData(pmk, &clsID, &fe, &stm);
if (FAILED(hr))
{
pmk->Release();
return;
}
//Send it to the data object for transfer
if (SUCCEEDED(pIDataObject->SetData(&fe, &stm, TRUE)))
*pFE=fe;
else
ReleaseStgMedium(&stm);
XformSizeInPixelsToHimetric(NULL, (LPSIZEL)pptl, (LPSIZEL)&ptl);
SETSIZEL(szl, (10*(m_rcl.right-m_rcl.left))
, (10 * (m_rcl.bottom-m_rcl.top)));
stm.hGlobal=INOLE_ObjectDescriptorFromOleObject
(m_pIOleObject, m_fe.dwAspect, ptl, &szl);
//Better set these properly or errors occur.
stm.tymed=TYMED_HGLOBAL;
stm.pUnkForRelease=NULL;
cf=RegisterClipboardFormat(CFSTR_LINKSRCDESCRIPTOR);
SETDefFormatEtc(fe, cf, TYMED_HGLOBAL);
if (FAILED(pIDataObject->SetData(&fe, &stm, TRUE)))
ReleaseStgMedium(&stm);
return;
}
/*
* CTenant::ShowObjectType
*
* Purpose:
* Tells the object to switch on or off an indication of whether
* it is linked or embedded.
*
* Parameters:
* fShow BOOL indicating to show the type (TRUE) or
* not (FALSE)
*
* Return Value:
* None
*/
void CTenant::ShowObjectType(BOOL fShow)
{
BOOL fWasShow;
DWORD dwState;
RECT rc;
HDC hDC;
fWasShow=(BOOL)(TENANTSTATE_SHOWTYPE & m_dwState);
dwState=m_dwState & ~TENANTSTATE_SHOWTYPE;
m_dwState=dwState | ((fShow) ? TENANTSTATE_SHOWTYPE : 0);
/*
* If this wasn't previously shown, just add the line,
* otherwise repaint.
*/
if (!fWasShow && fShow)
{
RECTFROMRECTL(rc, m_rcl);
RectConvertMappings(&rc, NULL, TRUE);
OffsetRect(&rc, -(int)m_pPG->m_xPos, -(int)m_pPG->m_yPos);
hDC=GetDC(m_hWnd);
UIShowObject(&rc, hDC, (TENANTTYPE_LINKEDOBJECT==m_tType));
ReleaseDC(m_hWnd, hDC);
}
if (fWasShow && !fShow)
Repaint();
return;
}
/*
* CTenant::NotifyOfRename
*
* Purpose:
* Instructs the tenant that the document was saved under a
* different name. In order to keep the right compound document
* user interface, this tenant needs to tell its object through
* IOleObject::SetHostNames.
*
* Parameters:
* pszFile LPTSTR of filename.
* pmkFile LPMONIKER of the new filename. If this and
* pmkPage are NULL then nothing happens with
* monikers.
* pmkPage LPMONIKER of the page we're in.
*
* Return Value:
* None
*/
void CTenant::NotifyOfRename(LPTSTR pszFile, LPMONIKER pmkFile
, LPMONIKER pmkPage)
{
TCHAR szObj[40];
TCHAR szApp[40];
if (NULL==m_pIOleObject)
return;
if (TEXT('\0')==*pszFile)
{
LoadString(m_pPG->m_hInst, IDS_UNTITLED, szObj
, sizeof(szObj));
}
else
{
GetFileTitle(pszFile, szObj, sizeof(szObj));
#ifndef WIN32
//Force filenames to uppercase in DOS versions.
AnsiUpper(szObj);
#endif
}
LoadString(m_pPG->m_hInst, IDS_CAPTION, szApp, sizeof(szApp));
#ifdef WIN32ANSI
OLECHAR szObjW[40], szAppW[40];
MultiByteToWideChar(CP_ACP, 0, szObj, -1, szObjW, 40);
MultiByteToWideChar(CP_ACP, 0, szApp, -1, szAppW, 40);
m_pIOleObject->SetHostNames(szAppW, szObjW);
#else
m_pIOleObject->SetHostNames(szApp, szObj);
#endif
if (NULL!=pmkFile)
{
ReleaseInterface(m_pmkFile);
m_pmkFile=pmkFile;
m_pmkFile->AddRef();
m_pIOleObject->SetMoniker(OLEWHICHMK_CONTAINER, pmkFile);
}
if (NULL!=pmkFile && NULL!=pmkPage)
{
LPMONIKER pmkTenant=NULL;
LPMONIKER pmkRel=NULL;
HRESULT hr;
//Create the moniker for this tenant.
#ifdef WIN32ANSI
GetStorageName(szObjW);
WideCharToMultiByte(CP_ACP, 0, szObjW, -1, szObj, 40
, NULL, NULL);
#else
GetStorageName(szObj);
#endif
hr=CreateItemMoniker(TEXT("!"), szObj, &pmkTenant);
if (SUCCEEDED(hr))
{
//Create the relative moniker, i.e. no pathname.
hr=pmkPage->ComposeWith(pmkTenant, FALSE, &pmkRel);
pmkTenant->Release();
//Hold on to the relative moniker
ReleaseInterface(m_pmk);
m_pmk=pmkRel;
if (SUCCEEDED(hr))
m_pIOleObject->SetMoniker(OLEWHICHMK_OBJREL, pmkRel);
}
}
return;
}
/*
* CTenant::Activate
*
* Purpose:
* Activates a verb on the object living in the tenant. Does
* nothing for static objects.
*
* Parameters:
* iVerb LONG of the verb to execute.
* pMSG LPMSG to the message causing the invocation.
*
* Return Value:
* BOOL TRUE if the object changed due to this verb
* execution.
*/
//CHAPTER22MOD
BOOL CTenant::Activate(LONG iVerb, LPMSG pMSG)
//End CHAPTER22MOD
{
RECT rc, rcH;
CHourglass *pHour;
SIZEL szl;
//Can't activate statics.
if (TENANTTYPE_STATIC==m_tType || NULL==m_pIOleObject)
{
MessageBeep(0);
return FALSE;
}
RECTFROMRECTL(rc, m_rcl);
RectConvertMappings(&rc, NULL, TRUE);
XformRectInPixelsToHimetric(NULL, &rc, &rcH);
pHour=new CHourglass;
//Get the server running first, then do a SetExtent, then show it
OleRun(m_pIOleObject);
if (m_fSetExtent)
{
SETSIZEL(szl, rcH.right-rcH.left, rcH.top-rcH.bottom);
m_pIOleObject->SetExtent(m_fe.dwAspect, &szl);
m_fSetExtent=FALSE;
}
//CHAPTER22MOD
m_pIOleObject->DoVerb(iVerb, pMSG, m_pImpIOleClientSite, 0
, m_hWnd, &rcH);
//End CHAPTER22MOD
delete pHour;
//If object changes, IAdviseSink::OnViewChange will see it.
return FALSE;
}
/*
* CTenant::Draw
*
* Purpose:
* Draws the tenant in its rectangle on the given hDC. We assume
* the DC is already set up for the mapping mode in which our
* rectangle is expressed, since the Page we're in tells us both
* the rect and the hDC.
*
* Parameters:
* hDC HDC in which to draw. Could be a metafile,
* memory DC, screen, or printer.
* ptd DVTARGETDEVICE * describing the device.
* hIC HDC holding an information context (printing).
* xOff, yOff int offsets for the page in lometric
* fNoColor BOOL indicating if we should do B & W
* fPrinter BOOL indicating if we should render for a
* printer.
*
* Return Value:
* None
*/
void CTenant::Draw(HDC hDC, DVTARGETDEVICE *ptd, HDC hIC
, int xOff, int yOff, BOOL fNoColor, BOOL fPrinter)
{
HRESULT hr;
RECT rc;
RECTL rcl;
UINT uMM;
//CHAPTER22MOD
/*
* Don't bother drawing anything but shading if we're doing in-place.
* It would just cause a lot of flicker.
*/
if (NULL!=m_pIOleIPObject)
return;
//End CHAPTER22MOD
RECTFROMRECTL(rc, m_rcl);
OffsetRect(&rc, -xOff, -yOff);
RECTLFROMRECT(rcl, rc);
//Repaint erases the rectangle to insure full object cleanup
if (!fNoColor && !fPrinter)
{
COLORREF cr;
cr=SetBkColor(hDC, GetSysColor(COLOR_WINDOW));
ExtTextOut(hDC, rc.left, rc.top, ETO_OPAQUE, &rc, NULL
, 0, NULL);
SetBkColor(hDC, cr);
}
//We have to use Draw since we have a target device and IC.
hr=m_pIViewObject2->Draw(m_fe.dwAspect, -1, NULL, ptd, hIC, hDC
, &rcl, NULL, NULL, 0);
/*
* If Draw failed, then perhaps it couldn't work for the device,
* so try good old OleDraw as a last resort. The code will
* generally be OLE_E_BLANK.
*/
if (FAILED(hr))
OleDraw(m_pObj, m_fe.dwAspect, hDC, &rc);
if (!fPrinter)
{
/*
* Draw sizing handles to show the selection state. We
* convert things to MM_TEXT since that's what this
* function expects.
*/
RectConvertMappings(&rc, NULL, TRUE);
uMM=SetMapMode(hDC, MM_TEXT);
if (TENANTSTATE_SELECTED & m_dwState)
{
UIDrawHandles(&rc, hDC, UI_HANDLES_INSIDE
| UI_HANDLES_NOBORDER | UI_HANDLES_USEINVERSE
, CXYHANDLE, TRUE);
}
if (TENANTSTATE_OPEN & m_dwState)
UIDrawShading(&rc, hDC, UI_SHADE_FULLRECT, 0);
//Distinguish linked and embedded objects.
if (TENANTSTATE_SHOWTYPE & m_dwState)
{
UIShowObject(&rc, hDC
, (TENANTTYPE_LINKEDOBJECT==m_tType));
}
uMM=SetMapMode(hDC, uMM);
}
return;
}
/*
* CTenant::Repaint
* CTenant::Invalidate
*
* Purpose:
* Repaints the tenant where it lies or invalidates its area
* for later repainting.
*
* Parameters:
* None
*
* Return Value:
* None
*/
void CTenant::Repaint(void)
{
RECT rc;
HDC hDC;
/*
* We might be asked to repaint from
* IOleClientSite::OnShowWindow after we've switched pages if
* our server was running. This check on m_cOpens prevents that.
*/
if (0==m_cOpens || !m_fRepaintEnabled)
return;
hDC=GetDC(m_hWnd);
SetRect(&rc, m_pPG->m_xPos, m_pPG->m_yPos, 0, 0);
RectConvertMappings(&rc, NULL, FALSE);
SetMapMode(hDC, MM_LOMETRIC);
Draw(hDC, NULL, NULL, rc.left, rc.top, FALSE, FALSE);
ReleaseDC(m_hWnd, hDC);
return;
}
void CTenant::Invalidate(void)
{
RECTL rcl;
RECT rc;
RectGet(&rcl, TRUE);
RECTFROMRECTL(rc, rcl);
OffsetRect(&rc, -(int)m_pPG->m_xPos, -(int)m_pPG->m_yPos);
InvalidateRect(m_hWnd, &rc, FALSE);
return;
}
/*
* CTenant::FIsSelected
*
* Purpose:
* Returns the selection state of this tenant.
*
* Parameters:
* None
*
* Return Value:
* BOOL TRUE if selected, FALSE otherwise.
*/
BOOL CTenant::FIsSelected(void)
{
return (BOOL)(m_dwState & TENANTSTATE_SELECTED);
}
/*
* CTenant::ConvertToStatic
*
* Purpose:
* Changes the object that lives in this tenant to a static one.
*
* Parameters:
* None
*
* Return Value:
* BOOL TRUE if successful, FALSE otherwise.
*/
BOOL CTenant::ConvertToStatic(void)
{
/*
* If you SetSourceMoniker in IOleLink to NULL, then the link is
* gone as far as OLE is concerned. You only need to make sure
* the user doesn't have access to other functionality for this
* object, which we insure by changing our internal type. We
* set this on loading if GetSourceMoniker returns NULL.
*/
m_tType=TENANTTYPE_STATIC;
return TRUE;
}
/*
* CTenant::ObjectClassFormatAndIcon
*
* Purpose:
* Helper function for CPage::ConvertObject to retrieve necessary
* information about the object.
*
* Parameters:
* pClsID LPCLSID in which to store the CLSID.
* pwFormat LPWORD in which to store the clipboard format
* used.
* ppszType LPTSTR * in which to return a pointer to a
* type string.
* phMetaIcon HGLOBAL * in which to return the metafile
* icon currently in use.
*
* Return Value:
* None
*/
void CTenant::ObjectClassFormatAndIcon(LPCLSID pClsID
, LPWORD pwFormat, LPTSTR *ppszType, HGLOBAL *phMetaIcon
, LPTSTR *ppszLabel)
{
HRESULT hr;
TCHAR szType[128];
LPDATAOBJECT pIDataObject;
FORMATETC fe;
STGMEDIUM stm;
if (TENANTTYPE_EMBEDDEDOBJECT!=m_tType || NULL==m_pIOleObject)
return;
if (NULL==pClsID || NULL==pwFormat || NULL==ppszType
|| NULL==phMetaIcon)
return;
/*
* For embedded objects get the real CLSID of the object and
* its format string. If this fails then we can try to ask
* the object, or we can look in the registry.
*/
hr=ReadClassStg(m_pIStorage, pClsID);
if (FAILED(hr))
{
hr=m_pIOleObject->GetUserClassID(pClsID);
if (FAILED(hr))
*pClsID=CLSID_NULL;
}
hr=ReadFmtUserTypeStg(m_pIStorage, pwFormat, ppszType);
if (FAILED(hr))
{
*pwFormat=0;
*ppszType=NULL;
if (INOLE_GetUserTypeOfClass(*pClsID, 0, szType
, sizeof(szType)))
{
*ppszType=INOLE_CopyString(szType);
}
}
/*
* Try to get the AuxUserType from the registry, using
* the short version (registered under AuxUserType\2).
* If that fails, just copy *ppszType.
*/
*ppszLabel=NULL;
if (INOLE_GetUserTypeOfClass(*pClsID, 2, szType
, sizeof(szType)))
{
*ppszLabel=INOLE_CopyString(szType);
}
else
*ppszLabel=INOLE_CopyString(*ppszType);
//Get the icon for this thing, if we're iconic.
*phMetaIcon=NULL;
hr=m_pObj->QueryInterface(IID_IDataObject
, (PPVOID)&pIDataObject);
if (SUCCEEDED(hr))
{
SETFormatEtc(fe, CF_METAFILEPICT, DVASPECT_ICON, NULL
, TYMED_MFPICT, -1);
hr=pIDataObject->GetData(&fe, &stm);
pIDataObject->Release();
if (SUCCEEDED(hr))
*phMetaIcon=stm.hGlobal;
else
*phMetaIcon=OleGetIconOfClass(*pClsID, NULL, TRUE);
}
return;
}
/*
* CTenant::SwitchOrUpdateAspect
*
* Purpose:
* Switches between DVASPECT_CONTENT and DVASPECT_ICON
*
* Parameters:
* hMetaIcon HGLOBAL to the new icon if we're changing the
* icon or switching to DVASPECT_ICON. NULL to
* change back to content.
* fPreserve BOOL indicating if we're to preserve the old
* aspect after changing.
*
* Return Value:
* BOOL TRUE if anything changed, FALSE otherwise.
*/
BOOL CTenant::SwitchOrUpdateAspect(HGLOBAL hMetaIcon
, BOOL fPreserve)
{
HRESULT hr;
DWORD dwAspect;
BOOL fUpdate=FALSE;
//Nothing to do if we're content already and there's no icon.
if (NULL==hMetaIcon && DVASPECT_CONTENT==m_fe.dwAspect)
return FALSE;
//If we're iconic already, just cache the new icon
if (NULL!=hMetaIcon && DVASPECT_ICON==m_fe.dwAspect)
hr=INOLE_SetIconInCache(m_pIOleObject, hMetaIcon);
else
{
//Otherwise, switch between iconic and content.
dwAspect=(NULL==hMetaIcon) ? DVASPECT_CONTENT : DVASPECT_ICON;
/*
* Switch between aspects, where dwAspect has the new one
* and m_fe.dwAspect will be changed in the process.
*/
hr=INOLE_SwitchDisplayAspect(m_pIOleObject
, &m_fe.dwAspect, dwAspect, hMetaIcon, !fPreserve
, TRUE, m_pImpIAdviseSink, &fUpdate);
if (SUCCEEDED(hr))
{
//Update MiscStatus for the new aspect
m_pIOleObject->GetMiscStatus(m_fe.dwAspect, &m_grfMisc);
if (fUpdate)
m_pIOleObject->Update(); //This repaints.
}
}
//If we switched, update our extents.
if (SUCCEEDED(hr))
{
SIZEL szl;
m_pIOleObject->GetExtent(m_fe.dwAspect, &szl);
if (0 > szl.cy)
szl.cy=-szl.cy;
//Convert HIMETRIC absolute units to our LOMETRIC mapping
if (0!=szl.cx && 0!=szl.cy)
SETSIZEL(szl, szl.cx/10, -szl.cy/10);
Invalidate(); //Remove old aspect
SizeSet(&szl, FALSE, FALSE); //Change size
Repaint(); //Paint the new one
}
return SUCCEEDED(hr);
}
/*
* CTenant::EnableRepaint
*
* Purpose:
* Toggles whether the Repaint function does anything. This
* is used during conversion/emulation of an object to disable
* repaints until the new object can be given the proper extents.
*
* Parameters:
* fEnable TRUE to enable repaints, FALSE to disable.
*
* Return Value:
* None
*/
void CTenant::EnableRepaint(BOOL fEnable)
{
m_fRepaintEnabled=fEnable;
return;
}
/*
* CTenant::ObjectGet
*
* Purpose:
* Retrieves the LPUNKNOWN of the object in use by this tenant
*
* Parameters:
* ppUnk LPUNKNOWN * in which to return the object
* pointer.
*
* Return Value:
* None
*/
void CTenant::ObjectGet(LPUNKNOWN *ppUnk)
{
if (NULL!=ppUnk)
{
*ppUnk=m_pObj;
m_pObj->AddRef();
}
return;
}
/*
* CTenant::FormatEtcGet
*
* Purpose:
* Retrieves the FORMATETC in use by this tenant
*
* Parameters:
* pFE LPFORMATETC in which to store the information.
* fPresentation BOOL indicating if we want the real format or
* that of the presentation.
*
* Return Value:
* None
*/
void CTenant::FormatEtcGet(LPFORMATETC pFE, BOOL fPresentation)
{
if (NULL!=pFE)
{
*pFE=m_fe;
//If there is no format, use metafile (for embedded objects)
if (fPresentation || 0==pFE->cfFormat)
{
//Don't mess with dwAspect; might be icon or content.
pFE->cfFormat=CF_METAFILEPICT;
pFE->tymed=TYMED_MFPICT;
}
}
return;
}
/*
* CTenant::SizeGet
* CTenant::SizeSet
* CTenant::RectGet
* CTenant::RectSet
*
* Purpose:
* Returns or sets the size/position of the object contained here.
*
* Parameters:
* pszl/prcl LPSIZEL (Size) or LPRECTL (Rect) with the
* extents of interest. In Get situations,
* this will receive the extents; in Set it
* contains the extents.
* fDevice BOOL indicating that pszl/prcl is expressed
* in device units. Otherwise it's LOMETRIC.
* fInformObj (Set Only) BOOL indicating if we need to inform
* the object all.
*
* Return Value:
* None
*/
void CTenant::SizeGet(LPSIZEL pszl, BOOL fDevice)
{
if (!fDevice)
{
pszl->cx=m_rcl.right-m_rcl.left;
pszl->cy=m_rcl.bottom-m_rcl.top;
}
else
{
RECT rc;
SetRect(&rc, (int)(m_rcl.right-m_rcl.left)
, (int)(m_rcl.bottom-m_rcl.top), 0, 0);
RectConvertMappings(&rc, NULL, TRUE);
pszl->cx=(long)rc.left;
pszl->cy=(long)rc.top;
}
return;
}
void CTenant::SizeSet(LPSIZEL pszl, BOOL fDevice, BOOL fInformObj)
{
SIZEL szl;
if (!fDevice)
{
szl=*pszl;
m_rcl.right =pszl->cx+m_rcl.left;
m_rcl.bottom=pszl->cy+m_rcl.top;
}
else
{
RECT rc;
SetRect(&rc, (int)pszl->cx, (int)pszl->cy, 0, 0);
RectConvertMappings(&rc, NULL, FALSE);
m_rcl.right =(long)rc.left+m_rcl.left;
m_rcl.bottom=(long)rc.top+m_rcl.top;
SETSIZEL(szl, (long)rc.left, (long)rc.top);
}
//Tell OLE that this object was resized.
if (NULL!=m_pIOleObject && fInformObj)
{
HRESULT hr;
BOOL fRun=FALSE;
//Convert our LOMETRIC into HIMETRIC by *=10
szl.cx*=10;
szl.cy*=-10; //Our size is stored negative.
/*
* If the MiscStatus bit of OLEMISC_RECOMPOSEONRESIZE
* is set, then we need to run the object before calling
* SetExtent to make sure it has a real chance to
* re-render the object. We have to update and close
* the object as well after this happens.
*/
if (OLEMISC_RECOMPOSEONRESIZE & m_grfMisc)
{
if (!OleIsRunning(m_pIOleObject))
{
OleRun(m_pIOleObject);
fRun=TRUE;
}
}
hr=m_pIOleObject->SetExtent(m_fe.dwAspect, &szl);
/*
* If the object is not running and it does not have
* RECOMPOSEONRESIZE, then SetExtent fails. Make
* sure that we call SetExtent again (by just calling
* SizeSet here again) when we next run the object.
*/
if (SUCCEEDED(hr))
{
m_fSetExtent=FALSE;
if (fRun)
{
m_pIOleObject->Update();
m_pIOleObject->Close(OLECLOSE_SAVEIFDIRTY);
}
}
else
{
if (OLE_E_NOTRUNNING==GetScode(hr))
m_fSetExtent=TRUE;
}
}
return;
}
void CTenant::RectGet(LPRECTL prcl, BOOL fDevice)
{
if (!fDevice)
*prcl=m_rcl;
else
{
RECT rc;
RECTFROMRECTL(rc, m_rcl);
RectConvertMappings(&rc, NULL, TRUE);
RECTLFROMRECT(*prcl, rc);
}
return;
}
void CTenant::RectSet(LPRECTL prcl, BOOL fDevice, BOOL fInformObj)
{
SIZEL szl;
LONG cx, cy;
//CHAPTER22MOD
/*
* Prevent reentrant calls that may come from calling
* UpdateInPlaceObjectRects here and elsewhere.
*/
if (m_fInRectSet)
return;
m_fInRectSet=TRUE;
//End CHAPTER22MOD
cx=m_rcl.right-m_rcl.left;
cy=m_rcl.bottom-m_rcl.top;
if (!fDevice)
m_rcl=*prcl;
else
{
RECT rc;
RECTFROMRECTL(rc, *prcl);
RectConvertMappings(&rc, NULL, FALSE);
RECTLFROMRECT(m_rcl, rc);
}
/*
* Tell ourselves that the size changed, if it did. SizeSet
* will call IOleObject::SetExtent for us.
*/
if ((m_rcl.right-m_rcl.left)!=cx || (m_rcl.bottom-m_rcl.top)!=cy)
{
SETSIZEL(szl, m_rcl.right-m_rcl.left, m_rcl.bottom-m_rcl.top);
SizeSet(&szl, FALSE, fInformObj);
}
//CHAPTER22MOD
//Tell an in-place active object it moved too
UpdateInPlaceObjectRects(NULL, TRUE);
m_fInRectSet=FALSE;
//End CHAPTER22MOD
return;
}
/*
* CTenant::CreateStatic
* (Protected)
*
* Purpose:
* Creates a new static bitmap or metafile object for this tenant
* using a freeloading method allowing us to specify exactly which
* type of data we want to paste since OleCreateStaticFromData
* doesn't.
*
* Parameters:
* pIDataObject LPDATAOBJECT from which to paste.
* pFE LPFORMATETC describing the format to paste.
* ppObj LPUNKNOWN * into which we store the
* object pointer.
*
* Return Value:
* HRESULT NOERROR on success, error code otherwise.
*/
HRESULT CTenant::CreateStatic(LPDATAOBJECT pIDataObject
, LPFORMATETC pFE, LPUNKNOWN *ppObj)
{
HRESULT hr;
STGMEDIUM stm;
LPUNKNOWN pIUnknown;
LPOLECACHE pIOleCache;
LPPERSISTSTORAGE pIPersistStorage;
CLSID clsID;
*ppObj=NULL;
//Try to get the data desired as specified in pFE->cfFormat
hr=pIDataObject->GetData(pFE, &stm);
if (FAILED(hr))
return hr;
//Create the object to handle this data.
if (CF_METAFILEPICT==pFE->cfFormat)
clsID=CLSID_Picture_Metafile;
else
clsID=CLSID_Picture_Dib;
hr=CreateDataCache(NULL, clsID, IID_IUnknown
, (PPVOID)&pIUnknown);
if (FAILED(hr))
{
ReleaseStgMedium(&stm);
return hr;
}
m_clsID=clsID;
//Stuff the data into the object
pIUnknown->QueryInterface(IID_IPersistStorage
, (PPVOID)&pIPersistStorage);
pIPersistStorage->InitNew(m_pIStorage);
//Now that we have the cache object, shove the data into it.
pIUnknown->QueryInterface(IID_IOleCache, (PPVOID)&pIOleCache);
pIOleCache->Cache(pFE, ADVF_PRIMEFIRST, NULL);
hr=pIOleCache->SetData(pFE, &stm, TRUE);
pIOleCache->Release();
//Insure there is a persistent copy on the disk
WriteClassStg(m_pIStorage, m_clsID);
pIPersistStorage->Save(m_pIStorage, TRUE);
pIPersistStorage->SaveCompleted(NULL);
pIPersistStorage->Release();
//The cache owns this now.
ReleaseStgMedium(&stm);
if (FAILED(hr))
pIUnknown->Release();
else
*ppObj=pIUnknown;
return hr;
}
//CHAPTER22MOD
/*
* CTenant::DeactivateInPlaceObject
*
* Purpose:
* Deactivates an in-place object if there is one in this tenant.
*
* Parameters:
* fFull BOOL indicating full deactivation of UI
* deactivate only.
*
* Return Value:
* None
*/
void CTenant::DeactivateInPlaceObject(BOOL fFull)
{
if (NULL!=m_pIOleIPObject)
{
/*
* Activate-when-visible objects only UI deactivate
* unless we're fully deactivating on purpose.
*/
if ((OLEMISC_ACTIVATEWHENVISIBLE & m_grfMisc) && !fFull)
m_pIOleIPObject->UIDeactivate();
else
m_pIOleIPObject->InPlaceDeactivate();
}
return;
}
/*
* CTenant::UpdateInPlaceObjectRects
*
* Purpose:
* Generates a call to IOleInPlaceObject::SetObjectRects to allow
* it to show it's shading and its object adornments properly.
* This function deals in HIMETRIC units.
*
* Parameters:
* prcPos LPCRECT to the size the object wants. Ignored
* if NULL in which case we use the size of the
* tenant. This rect is in client coordinates of
* the pages window.
* fUseTenantRect BOOL indicating if we need to use the tenant
* rectangle offset for scrolling regardless.
*
* Return Value:
* None
*/
void CTenant::UpdateInPlaceObjectRects(LPCRECT prcPos
, BOOL fUseTenantRect)
{
RECTL rcl;
RECT rc;
RECT rcClip;
BOOL fResizeTenant=TRUE;
/*
* Note that if the object here is activate-when-visible
* we'll always have this pointer.
*/
if (NULL!=m_pIOleIPObject)
{
/*
* This uses the last position rectangle from
* IOleInPlaceSite::OnPosRectChange if it's been
* initialized
*/
if (NULL==prcPos && -1!=m_rcPos.left && !fUseTenantRect)
prcPos=&m_rcPos;
//This code is normally called from OnPosRectChange direct.
if (NULL!=prcPos && !fUseTenantRect)
{
rc=*prcPos;
//Calculate the boundaries of the full page
m_pPG->CalcBoundingRect(&rcClip, FALSE);
//Make sure we limit object to page boundaries.
IntersectRect(&rc, &rc, &rcClip);
}
else
{
/*
* We have no rectangle of the object on which to
* base the position, so just use the tenant rectangle.
* This code is also used when scrolling objects.
*/
RectGet(&rcl, TRUE);
RECTFROMRECTL(rc, rcl);
//Account for scrolling
OffsetRect(&rc, -(int)m_pPG->m_xPos, -(int)m_pPG->m_yPos);
fResizeTenant=FALSE;
}
//We don't clip special anywhere in our window.
SetRect(&rcClip, 0, 0, 32767, 32767);
/*
* NOTE: The rectangles to SetObjectRects is in client
* coordinates of the pages window.
*/
if (NULL!=m_pIOleIPObject)
m_pIOleIPObject->SetObjectRects(&rc, &rcClip);
if (fResizeTenant)
{
//Need to tell the tenant to change position too
RECTLFROMRECT(rcl, rc);
RectSet(&rcl, TRUE, FALSE);
}
}
return;
}
/*
* CTenant::ObjectWindow
*
* Purpose:
* Returns the window handle of the in-place object.
*
* Parameters:
* None
*
* Return Value:
* HWND Handle of the object window.
*/
HWND CTenant::ObjectWindow(void)
{
HWND hWnd=NULL;
if (NULL!=m_pIOleIPObject)
m_pIOleIPObject->GetWindow(&hWnd);
return hWnd;
}
//End CHAPTER22MOD