GCP_RESULTS

The GCP_RESULTS structure contains information about characters in a string. This structure receives the results of the GetCharacterPlacement function. For some languages, the first element in the arrays may contain more, language-dependent information.

typedef struct tagGCP_RESULTS {
    DWORD  lStructSize;
    LPTSTR  lpOutString;
    UINT  *lpOrder;
    INT  *lpDx;
    INT  *lpCaretPos;
    LPTSTR lpClass;
    UINT  *lpGlyphs;
    UINT  nGlyphs;
    UINT  nMaxFit;
} GCP_RESULTS;

Members

lStructSize

Specifies the size, in bytes, of the structure.

lpOutString

Pointer to the buffer that receives the output string or is NULL if the output string is not needed. The output string is a version of the original string that is in the order that will be displayed on a given device. Typically the output string is identical to the original string, but may be different if the string needs reordering and the GCP_REORDER flag is set or if the the original string exceeds the maximum extent and the GCP_MAXEXTENT flag is set.

lpOrder

Pointer to the array that receives the ordering indices for the characters in the output string or is NULL if the ordering indices are not needed. The original string needs reordering if the GetFontLanguageInfo function returns the GCP_REORDER value. This is typically used when GetFontLanguageInfo returns the GCP_REORDER flag. For example, in Hebrew, in which the text runs from right to left, the lpOrder array gives the exact locations of each element in the original string.

lpDx

Pointer to the array that receives the distances between adjacent character cells or is NULL if these distances are not needed. If glyph rendering is done, the distances are for the glyphs not the characters, so the resulting array can be used with the ExtTextOut function.

The distances in this array are in display order. To find the distance for the ith character in the original string, use the lpOrder array as follows:

width = lpDx[lpOrder[i]];

On input, this member may contain justification weight values if the GCP_JUSTIFYIN value is given with the GetCharacterPlacement function.

lpCaretPos

Pointer to the array that receives the caret position values or is NULL if caret positions are not needed. Each value specifies the caret position immediately before the corresponding character. In some languages the position of the caret for each character may not be immediately to the left of the character. For example, in Hebrew, in which the text runs from right to left, the caret position is to the right of the character. If glyph ordering is done, lpCaretPos matches the original string not the output string. This means that some adjacent values may be the same.

The values in this array are in input order. To find the caret position value for the ith character in the original string, use the array as follows:

position = lpCaretPos[i];

lpClass

Pointer to the array that contains and/or receives character classifications. The values indicate how to lay out characters in the string and are similar (but not identical) to the CT_CTYPE2 values returned by the GetStringTypeEx function. Each element of the array can be set to zero or one of the following values:

Value	Meaning
GCPCLASS_ARABIC	Arabic character.
GCPCLASS_HEBREW	Hebrew character.
GCPCLASS_LATIN	Character from a Latin or other single-byte character set for a left-to-right language.
GCPCLASS_LATINNUMBER	Digit from a Latin or other single-byte character set for a left-to-right language.
GCPCLASS_LOCALNUMBER	Digit from the character set associated with the current font.

In addition, the following can be used when supplying values in the lpClass array with the GCP_CLASSIN flag.

Value Meaning

GCPCLASS_LATINNUMERICSEPARATOR Input only. Character used to separate Latin digits, such as acomma or decimal point.

GCPCLASS_LATINNUMERICTERMINATOR Input only. Character used to terminate Latin digits, such as a plus or minus sign.

GCPCLASS_NEUTRAL Input only. character has no specific classification.

GCPCLASS_NUMERICSEPARATOR Input only. Character used to separate digits, such as a comma or decimal point.

Value	Meaning
GCPCLASS_LATINNUMERICSEPARATOR	Input only. Character used to separate Latin digits, such as acomma or decimal point.
GCPCLASS_LATINNUMERICTERMINATOR	Input only. Character used to terminate Latin digits, such as a plus or minus sign.
GCPCLASS_NEUTRAL	Input only. character has no specific classification.
GCPCLASS_NUMERICSEPARATOR	Input only. Character used to separate digits, such as a comma or decimal point.

For languages that use the GCP_REORDER flag, the following values can also be used with the GCP_CLASSIN flag. Unlike the preceding values, which can be used anywhere in the lpClass array, all of the following values are used only in the first location in the array. All combine with other classifications. Note that GCPCLASS_PREBOUNDLTR and GCPCLASS_PREBOUNDRTL are mutually exclusive, as are GCPCLASSPOSTBOUNDLTR and GCPCLASSPOSTBOUNDRTL.

Value Meaning

GCPCLASS_PREBOUNDLTR Set lpClass[0] to GCP_CLASS_PREBOUNDLTR to bind the string to left-to-right reading order before the string.

GCPCLASS_PREBOUNDRTL Set lpClass[0] to GCP_CLASS_PREBOUNDRTL to bind the string to right-to-left reading order before the string.

GCPCLASS_POSTBOUNDLTR Set lpClass[0] to GCP_CLASS_POSTBOUNDLTR to bind the string to left-to-right reading order after the string.

GCPCLASS_POSTBOUNDRTL Set lpClass[0] to GCP_CLASS_POSTBOUNDRTL to bind the string to right-to-left reading order after the string.

Value	Meaning
GCPCLASS_PREBOUNDLTR	Set lpClass[0] to GCP_CLASS_PREBOUNDLTR to bind the string to left-to-right reading order before the string.
GCPCLASS_PREBOUNDRTL	Set lpClass[0] to GCP_CLASS_PREBOUNDRTL to bind the string to right-to-left reading order before the string.
GCPCLASS_POSTBOUNDLTR	Set lpClass[0] to GCP_CLASS_POSTBOUNDLTR to bind the string to left-to-right reading order after the string.
GCPCLASS_POSTBOUNDRTL	Set lpClass[0] to GCP_CLASS_POSTBOUNDRTL to bind the string to right-to-left reading order after the string.

To force the layout of a character to be carried out in a specific way, preset the classification for the corresponding array element; the function leaves such preset classifications unchanged and computes classifications only for array elements that have been set to zero. Preset classifications are used only if the GCP_CLASSIN flag is set and the lpclass array is supplied.

If getFontLanguageInfo does not return GCP_REORDER for the current font, only the GCPCLASS_LATIN value is meaningful.

lpGlyphs

Pointer to the array that receives the values identifying the glyphs used for rendering the string or is NULL if glyph rendering is not needed. The number of glyphs in the array may be less than the number of characters in the original string if the string contains ligated glyphs. Also if reordering is required, the order of the glyphs may not be sequential.

This array is useful if more than one operation is being done on a string which has any form of ligation, kerning or order-switching. Using the values in this array for subsequent operations saves the time otherwise required to generate the glyph indices each time.

This array always contains glyph indices and the ETO_GLYPH_INDEX value must always be used when this array is used with the ExtTextOut function.

When GCP_LIGATE is used, you can limit the number of characters that will be ligated together. (In Arabic for example, three-character ligations are common). This is done by setting the maximum required in lpGcpResults->lpGlyphs[0]. If no maximum is required, you should set this field to zero.

For languages such as Arabic, where GetFontLanguageInfo returns the GCP_GLYPHSHAPE flag, the glyphs for a character will be different depending on whether the character is at the beginning, middle, or end of a word. Typically, the first character in the input string will also be the first character in a word, and the last character in the input string will be treated as the last character in a word. However, if the displayed string is a subset of the complete string, such as when displaying a section of scrolled text, this may not be true. In these cases, it is desirable to force the first or last characters to be shaped as not being initial or final forms. To do this, again, the first location in the lpGlyphs array is used by performing an OR operation of the ligation value above with the values GCPGLYPH_LINKBEFORE and/or GCPGLYPH_LINKAFTER. For example, a value of GCPGLYPH_LINKBEFORE | 2 means that two-character ligatures are the maximum required, and the first character in the string should be treated as if it is in the middle of a word.

nGlyphs

On input, this member must be set to the size of the arrays pointed to by the array pointer members. On output, this is set to the number of glyphs filled in, in the output arrays. If glyph substitution is not required (that is, each input character maps to exactly one glyph), this member is the same as it is on input.

nMaxFit

Number of characters that fit within the extents specified by the nMaxExtent parameter of the GetCharacterPlacement function. If the GCP_MAXEXTENT or GCP_JUSTIFY value is set, this value may be less than the number of characters in the original string. This member is set regardless of whether the GCP_MAXEXTENT or GCP_JUSTIFY value is given. Unlike nGlyphs, which specifies the number of output glyphs, nMaxFit refers to the number of characters from the input string. For Latin SBCS languages, this will be the same.

Remarks

Whether the lpGlyphs, lpOutString, or neither is required depends on the results of the GetFontLanguageInfo call.

In the case of a font for a language such as English, in which none of the GCP_DBCS, GCP_REORDER, GCP_GLYPHSHAPE, GCP_LIGATE, GCP_DIACRITIC, or GCP_KASHIDA flags are returned, neither of the arrays is required for proper operation. (Though not required, they can still be used. If the lpOutString array is used, it will be exactly the same as the lpInputString passed to GetCharacterPlacement.) Note, however, that if GCP_MAXEXTENT is used, then lpOutString will contain the truncated string if it is used, NOT an exact copy of the original.

In the case of fonts for languages such as Hebrew, which DO have reordering but do not typically have extra glyph shapes, lpOutString should be used. This will give the string on the screen-readable order. However, the lpGlyphs array is not typically needed. (Hebrew can have extra glyphs, if the font is a TrueType/Open font.)

In the case of languages such as Thai or Arabic, in which GetFontLanguageInfo returns the GCP_GLYPHSHAPE flag, the lpOutString will give the display-readable order of the string passed to GetCharacterPlacement, but the values will still be the unshaped characters. For proper display, the lpGlyphs array must be used.

QuickInfo

  Windows NT: Requires version 4.0 or later.
  Windows: Requires Windows 95 or later.
  Windows CE: Unsupported.
  Header: Declared in wingdi.h.
  Unicode: Defined as Unicode and ANSI structures.

GCP_RESULTS

Members

Remarks

QuickInfo

See Also