EXTLOGPEN

The EXTLOGPEN structure defines the pen style, width, and brush attributes for an extended pen. This structure is used by the GetObject function when it retrieves a description of a pen that was created when an application called the ExtCreatePen function.

typedef struct tagEXTLOGPEN { 
    UINT     elpPenStyle; 
    UINT     elpWidth; 
    UINT     elpBrushStyle; 
    COLORREF elpColor; 
    LONG     elpHatch; 
    DWORD    elpNumEntries; 
    DWORD    elpStyleEntry[1]; 
} EXTLOGPEN; 
 

Members

elpPenStyle

Specifies a combination of pen type, style, end cap style, and join style. The values from each category can be retrieved by using a bitwise AND with the appropriate mask.

The elpPenStyle member masked with PS_TYPE_MASK has one of the following pen type values:

Value	Meaning
PS_GEOMETRIC	The pen is geometric.
PS_COSMETIC	The pen is cosmetic.

The elpPenStyle member masked with PS_STYLE_MASK has one of the following pen styles values:

Value	Meaning
PS_SOLID	The pen is solid.
PS_DASH	The pen is dashed.
PS_DOT	The pen is dotted.
PS_DASHDOT	The pen has alternating dashes and dots.
PS_DASHDOTDOT	The pen has alternating dashes and double dots.
PS_NULL	The pen is invisible.
PS_USERSTYLE	The pen will use a styling array supplied by the user.
PS_INSIDEFRAME	The pen is solid. When this pen is used in any GDI drawing function that takes a bounding rectangle, the dimensions of the figure are shrunk so that it fits entirely in the bounding rectangle, taking into account the width of the pen. This applies only to PS_GEOMETRIC pens.

The following category applies only to PS_GEOMETRIC pens. The elpPenStyle member masked with PS_ENDCAP_MASK has one of the following end cap values:

Value	Meaning
PS_ENDCAP_ROUND	Line end caps are round.
PS_ENDCAP_SQUARE	Line end caps are square.
PS_ENDCAP_FLAT	Line end caps are flat.

The following category applies only to PS_GEOMETRIC pens. The elpPenStyle member masked with PS_JOIN_STYLE has one of the following join values:

Value	Meaning
PS_JOIN_BEVEL	Line joins are beveled.
PS_JOIN_MITER	Line joins are mitered when they are within the current SetMiterLimit limit. A join is beveled when it would exceed the limit.
PS_JOIN_ROUND	Line joins are round.

elpWidth

Specifies the width of the pen. If the elpPenStyle member specifies geometric lines, this value is the width, in logical units, of the line. Otherwise, the lines are cosmetic and this value is 1.

elpBrushStyle

Specifies the brush style of the pen. The elpBrushStyle member values can be one of the following:

Value	Description
BS_DIBPATTERN	Specifies a pattern brush defined by a device-independent bitmap (DIB) specification. If elpBrushStyle is BS_DIBPATTERN, the elpHatch member contains a handle to a packed DIB.
BS_DIBPATTERNPT	Specifies a pattern brush defined by a device-independent bitmap (DIB) specification. If elpBrushStyle is BS_DIBPATTERNPT, the elpHatch member contains a pointer to a packed DIB.
BS_HATCHED	Specifies a hatched brush.
BS_HOLLOW	Specifies a hollow or NULL brush.
BS_PATTERN	Specifies a pattern brush defined by a memory bitmap.
BS_SOLID	Specifies a solid brush.

elpColor

If elpBrushStyle is BS_SOLID or BS_HATCHED, elpColor specifies the color in which the pen is to be drawn. For BS_HATCHED, the SetBkMode and SetBkColor functions determine the background color.

If elpBrushStyle is BS_HOLLOW or BS_PATTERN, elpColor is ignored.

If elpBrushStyle is BS_DIBPATTERN or BS_DIBPATTERNPT, the low-order word of elpColor specifies whether the bmiColors members of the BITMAPINFO structure contain explicit red, green, blue (RGB) values or indexes into the currently realized logical palette. The elpColor value must be one of the following:

Value	Meaning
DIB_PAL_COLORS	The color table consists of an array of 16-bit indexes into the currently realized logical palette.
DIB_RGB_COLORS	The color table contains literal RGB values.

elpHatch

If elpBrushStyle is BS_PATTERN, elpHatch is a handle to the bitmap that defines the pattern.

If elpBrushStyle is BS_SOLID or BS_HOLLOW, elpHatch is ignored.

If elpBrushStyle is BS_DIBPATTERN, the elpHatch member is a handle to a packed DIB. To obtain this handle, an application calls the GlobalAlloc function to allocate a block of global memory and then fills the memory with the packed DIB. A packed DIB consists of a BITMAPINFO structure immediately followed by the array of bytes that define the pixels of the bitmap.

If elpBrushStyle is BS_DIBPATTERNPT, the elpHatch member is a pointer to a packed DIB.

If elpBrushStyle is BS_HATCHED, the elpHatch member specifies the orientation of the lines used to create the hatch. It can be any one of the following values:

Value	Meaning
HS_BDIAGONAL	45-degree upward hatch (left to right)
HS_CROSS	Horizontal and vertical crosshatch
HS_DIAGCROSS	45-degree crosshatch
HS_FDIAGONAL	45-degree downward hatch (left to right)
HS_HORIZONTAL	Horizontal hatch
HS_VERTICAL	Vertical hatch

elpNumEntries

Specifies the number of entries in the style array in the elpStyleEntry member. This value is zero if elpPenStyle does not specify PS_USERSTYLE.

elpStyleEntry

Specifies a user-supplied style array. The array is specified with a finite length, but it is used as if it repeated indefinitely. The first entry in the array specifies the length of the first dash. The second entry specifies the length of the first gap. Thereafter, lengths of dashes and gaps alternate.

If elpWidth specifies geometric lines, the lengths are in logical units. Otherwise, the lines are cosmetic and lengths are in device units.

QuickInfo

  Windows NT: Requires version 3.1 or later.
  Windows: Requires Windows 95 or later.
  Windows CE: Unsupported.
  Header: Declared in wingdi.h.

See Also

Pens Overview, Pen Structures, BITMAPINFO, ExtCreatePen, GetObject, GlobalAlloc, SetBkColor, SetBkMode