ADAPTER_STATUS

The ADAPTER_STATUS structure contains information about a network adapter. This structure is pointed to by the ncb_buffer member of the NCB structure. ADAPTER_STATUS is followed by as many NAME_BUFFER structures as required to describe the network adapters on the system.

typedef struct _ADAPTER_STATUS { // adptst 
    UCHAR   adapter_address[6]; 
    UCHAR   rev_major; 
    UCHAR   reserved0; 
    UCHAR   adapter_type; 
    UCHAR   rev_minor; 
    WORD    duration; 
    WORD    frmr_recv; 
    WORD    frmr_xmit; 
    WORD    iframe_recv_err; 
    WORD    xmit_aborts; 
    DWORD   xmit_success; 
    DWORD   recv_success; 
    WORD    iframe_xmit_err; 
    WORD    recv_buff_unavail; 
    WORD    t1_timeouts; 
    WORD    ti_timeouts; 
    DWORD   reserved1; 
    WORD    free_ncbs; 
    WORD    max_cfg_ncbs; 
    WORD    max_ncbs; 
    WORD    xmit_buf_unavail; 
    WORD    max_dgram_size; 
    WORD    pending_sess; 
    WORD    max_cfg_sess; 
    WORD    max_sess; 
    WORD    max_sess_pkt_size; 
    WORD    name_count; 
} ADAPTER_STATUS;

Members

adapter_address: Specifies encoded address of the adapter.
rev_major: Specifies the major software-release level. This value is 3 for IBM NetBIOS 3. x.
reserved0: Reserved. This value is always zero.
adapter_type: Specifies the adapter type. This value is 0xFF for a Token Ring adapter or 0xFE for an Ethernet adapter.
rev_minor: Specifies the minor software-release level. This value is zero for IBM NetBIOS x.0.
duration: Specifies the duration of the reporting period, in minutes.
frmr_recv: Specifies the number of FRMR frames received.
frmr_xmit: Specifies the number of FRMR frames transmitted.
iframe_recv_err: Specifies the number of I frames received in error.
xmit_aborts: Specifies the number of aborted transmissions.
xmit_success: Specifies the number of successfully transmitted packets.
recv_success: Specifies the number of successfully received packets.
iframe_xmit_err: Specifies the number of I frames transmitted in error.
recv_buff_unavail: Specifies the number of times a buffer was not available to service a request from a remote computer.
t1_timeouts: Specifies the number of times that the DLC T1 timer timed out.
ti_timeouts: Specifies the number of times that the ti inactivity timer timed out.The ti timer is used to detect links that have been broken.
reserved1: Reserved. This value is always zero.
free_ncbs: Specifies the current number of free network control blocks.
max_cfg_ncbs: Undefined for IBM NetBIOS 3.0.
max_ncbs: Undefined for IBM NetBIOS 3.0.
xmit_buf_unavail: Undefined for IBM NetBIOS 3.0.
max_dgram_size: Specifies the maximum size of a datagram packet. This value is always at least 512 bytes.
pending_sess: Specifies the number of pending sessions.
max_cfg_sess: Specifies the configured maximum pending sessions.
max_sess: Undefined for IBM NetBIOS 3.0.
max_sess_pkt_size: Specifies the maximum size of a session data packet.
name_count: Specifies the number of names in the local names table.

QuickInfo

  Windows NT: Requires version 3.1 or later.
  Windows: Requires Windows 95 or later.
  Windows CE: Unsupported.
  Header: Declared in nb30.h.

ADAPTER_STATUS

Members

QuickInfo

See Also