PHONEBUTTONFUNCTION_ Constants

The PHONEBUTTONFUNCTION_ scalar constants describe the functions commonly assigned to buttons on telephone sets.

PHONEBUTTONFUNCTION_UNKNOWN
A "dummy" function assignment that indicates that the exact function of the button is unknown or has not been assigned.
PHONEBUTTONFUNCTION_CONFERENCE
Initiates a conference call or adds a call to a conference call.
PHONEBUTTONFUNCTION_TRANSFER
Initiates a call transfer or completes the transfer of a call.
PHONEBUTTONFUNCTION_DROP
Drops the active call.
PHONEBUTTONFUNCTION_HOLD
Places the active call on hold.
PHONEBUTTONFUNCTION_RECALL
Unholds a call.
PHONEBUTTONFUNCTION_DISCONNECT
Disconnects a call, such as after initiating a transfer.
PHONEBUTTONFUNCTION_CONNECT
Reconnects a call that is on consultation hold.
PHONEBUTTONFUNCTION_MSGWAITON
Turns on a message waiting lamp.
PHONEBUTTONFUNCTION_MSGWAITOFF
Turns off a message waiting lamp.
PHONEBUTTONFUNCTION_SELECTRING
Allows the user to select the ring pattern of the phone.
PHONEBUTTONFUNCTION_ABBREVDIAL
The number to be dialed will be indicated using a short, abbreviated number consisting of one digit or a few digits.
PHONEBUTTONFUNCTION_FORWARD
Initiates or changes call forwarding to this phone.
PHONEBUTTONFUNCTION_PICKUP
Picks up a call ringing on another phone.
PHONEBUTTONFUNCTION_RINGAGAIN
Initiates a request to be notified if a call cannot be completed normally because of a busy signal or no answer.
PHONEBUTTONFUNCTION_PARK
Parks the active call on another phone, placing it on hold there.
PHONEBUTTONFUNCTION_REJECT
Rejects an incoming call before the call has been answered.
PHONEBUTTONFUNCTION_REDIRECT
Redirects an incoming call to another extension before the call has been answered.
PHONEBUTTONFUNCTION_MUTE
Mutes the phone's microphone device.
PHONEBUTTONFUNCTION_VOLUMEUP
Increases the volume of audio through the phone's handset speaker or speakerphone.
PHONEBUTTONFUNCTION_VOLUMEDOWN
Decreases the volume of audio through the phone's handset speaker or speakerphone.
PHONEBUTTONFUNCTION_SPEAKERON
Turns the phone's external speaker on.
PHONEBUTTONFUNCTION_SPEAKEROFF
Turns the phone's external speaker off.
PHONEBUTTONFUNCTION_FLASH
Generates the equivalent of an onhook/offhook sequence. A flash typically indicates that any digits typed next are to be understood as commands to the switch. On many switches, places an active call on consultation hold.
PHONEBUTTONFUNCTION_DATAON
Indicates that the next call is a data call.
PHONEBUTTONFUNCTION_DATAOFF
Indicates that the next call is not a data call.
PHONEBUTTONFUNCTION_DONOTDISTURB
Places the phone in "do not disturb" mode; incoming calls receive a busy signal or are forwarded to an operator or voice mail system.
PHONEBUTTONFUNCTION_INTERCOM
Connects to the intercom to broadcast a page.
PHONEBUTTONFUNCTION_BRIDGEDAPP
Selects a particular appearance of a bridged address.
PHONEBUTTONFUNCTION_BUSY
Makes the phone appear "busy" to incoming calls.
PHONEBUTTONFUNCTION_CALLAPP
Selects a particular call appearance.
PHONEBUTTONFUNCTION_DATETIME
Causes the phone to display current date and time; this information would be sent by the switch.
PHONEBUTTONFUNCTION_DIRECTORY
Calls up directory service from the switch.
PHONEBUTTONFUNCTION_COVER
Forwards all calls destined for this phone to another phone used for coverage.
PHONEBUTTONFUNCTION_CALLID
Requests display of caller ID on the phone's display.
PHONEBUTTONFUNCTION_LASTNUM
Redials last number dialed.
PHONEBUTTONFUNCTION_NIGHTSRV
Places the phone in the mode it is configured for during night hours.
PHONEBUTTONFUNCTION_SENDCALLS
Sends all calls to another phone used for coverage; same as PHONEBUTTONFUNCTION_COVER.
PHONEBUTTONFUNCTION_MSGINDICATOR
Controls the message indicator lamp.
PHONEBUTTONFUNCTION_REPDIAL
Repertory dialing—the number to be dialed is provided as a shorthand following pressing of this button.
PHONEBUTTONFUNCTION_SETREPDIAL
Programs the shorthand-to-phone number mappings accessible by means of repertory dialing (the "REPDIAL" button).
PHONEBUTTONFUNCTION_SYSTEMSPEED
The number to be dialed is provided as a shorthand following pressing of this button. The mappings for system speed dialing are configured inside the switch.
PHONEBUTTONFUNCTION_STATIONSPEED
The number to be dialed is provided as a shorthand following pressing of this button. The mappings for station speed dialing are specific to this station (phone).
PHONEBUTTONFUNCTION_CAMPON
Camps-on an extension that returns a busy indication. When the remote station returns to idle, the phone will be rung with a distinctive patterns. Picking up the local phone reinitiates the call.
PHONEBUTTONFUNCTION_SAVEREPEAT
When pressed while a call or call attempt is active, it will remember that call's number or command. When pressed while no call is active (such as during dial tone), it repeats the most saved command.
PHONEBUTTONFUNCTION_QUEUECALL
Queues a call to an outside number after it encounters a trunk-busy indication. When a trunk becomes later available, the phone will be rung with a distinctive pattern. Picking up the local phone reinitiates the call.
PHONEBUTTONFUNCTION_NONE
A "dummy" function assignment that indicates that the button does not have a function.

Values in the range 0x80000000 to 0xFFFFFFFF can be assigned for device-specific extensions; values in the range 0x00000000 to 0x7FFFFFFF are reserved.

The PHONEBUTTONFUNCTION_ constants have values commonly found on current telephone sets. These button functions can be used to invoke the corresponding function from the switch using lineDevSpecificFeature. Note that TAPI does not define the semantics of the button functions; it only provides access to the corresponding function. The behavior associated with each of the function values above is generic and can vary based on the telephony environment.