To use KD to debug kernel-mode executables from a remote location, you must connect a null-modem serial cable to the serial ports of the host computer running KD and the NT computer running the executables. The following tables list these connections:
KD Serial Cable Connections
| KD Serial port | Connected to | NT Serial port |
|---|---|---|
| Transmit | Receive | |
| Receive | Transmit | |
| Ground | Ground |
KD 9-pin and 25-pin D-subminiature Cable Connections
| Pin | Connected to | Pin |
|---|---|---|
| 2 | 3 | |
| 3 | 2 | |
| 7 | 7 |