WM_SYSKEYDOWN

The WM_SYSKEYDOWN message is posted to the window with the keyboard focus when the user presses the F10 key (which activates the menu bar) or holds down the alt key and then presses another key. It also occurs when no window currently has the keyboard focus; in this case, the WM_SYSKEYDOWN message is sent to the active window. The window that receives the message can distinguish between these two contexts by checking the context code in the lKeyData parameter.

WM_SYSKEYDOWN 
nVirtKey = (int) wParam;    // virtual-key code 
lKeyData = lParam;          // key data

Parameters

nVirtKey

Value of wParam. Specifies the virtual-key code of the key being pressed.

lKeyData

Value of lParam. Specifies the repeat count, scan code, extended-key flag, context code, previous key-state flag, and transition-state flag, as shown in the following table.

Value	Description
0–15	Specifies the repeat count for the current message. The value is the number of times the keystroke is auto-repeated as a result of the user holding down the key. If the keystroke is held long enough, multiple messages are sent. However, the repeat count is not cumulative.
16–23	Specifies the scan code. The value depends on the original equipment manufacturer (OEM).
24	Specifies whether the key is an extended key, such as the right-hand alt and ctrl keys that appear on an enhanced 101- or 102-key keyboard. The value is 1 if it is an extended key; otherwise, it is 0.
25–28	Reserved; do not use.
29	Specifies the context code. The value is 1 if the ALT key is down while the key is pressed; it is 0 if the WM_SYSKEYDOWN message is posted to the active window because no window has the keyboard focus.
30	Specifies the previous key state. The value is 1 if the key is down before the message is sent, or it is 0 if the key is up.
31	Specifies the transition state. The value is always 0 for a WM_SYSKEYDOWN message.

Return Values

An application should return zero if it processes this message.

Default Action

The DefWindowProc function examines the given key and generates a WM_SYSCOMMAND message if the key is either tab or enter.

Remarks

When the context code is zero, the message can be passed to the TranslateAccelerator function, which will handle it as though it were a normal key message instead of a character-key message. This allows accelerator keys to be used with the active window even if the active window does not have the keyboard focus.

Because of automatic repeat, more than one WM_SYSKEYDOWN message may occur before a WM_SYSKEYUP message is sent. The previous key state (bit 30) can be used to determine whether the WM_SYSKEYDOWN message indicates the first down transition or a repeated down transition.

For enhanced 101- and 102-key keyboards, enhanced keys are the right alt and ctrl keys on the main section of the keyboard; the ins, del, home, end, page up, page down and arrow keys in the clusters to the left of the numeric keypad; and the divide (/) and enter keys in the numeric keypad. Other keyboards may support the extended-key bit in the lParam parameter.

This message is also sent whenever the user presses the F10 key without the ALT key.

QuickInfo