Message box title

Message text

Access Denied

A process has requested access to an object, but has not been granted those access rights.

Already Committed

The specified address range is already committed.

Application Error

The exception name (number) occurred in the application at location address.

Application Error

The application failed to initialize properly (number).

Click on OK to terminate the application.

Application Exit by CTRL+C

The application terminated as a result of a CTRL+C.

Bad CRC

A cyclic redundancy check (CRC) checksum error occurred.

Bad File

The attributes of the specified mapping file for a section of memory cannot be read.

Bad Image

The application or DLL filename is not a valid Windows NT image.

Please check this against your installation diskette.

Buffer Too Small

The buffer is too small to contain the entry. No information has been written to the buffer.

Cancel Timeout

The driver name failed to complete a canceled I/O request in the allotted time.

Cannot Continue

Windows NT cannot continue from this exception.

Conflicting Address Range

The specified address range conflicts with the address space.

Corrupt Disk

The file system structure on the disk is corrupt and unusable.

Please run the Chkdsk utility on the volume name.

Corrupt File

The file or directory filename is corrupt and unreadable.

Please run the Chkdsk utility.

Data Error

An error in reading or writing data occurred.

Data Late

A data late error occurred.

Data Not Accepted

The TDI client could not handle the data received during an indication.

Data Overrun

A data overrun error occurred.

Device Timeout

The specified I/O operation on name was not completed before the time-out period expired.

DLL Initialization Failed

Initialization of the dynamic link library filename failed. The process is terminating abnormally.

Drive Not Ready

The drive is not ready for use; its door may be open.

Please check drive drive letter and make sure that a disk is inserted and that the drive door is closed.

Entry Point Not Found

The procedure entry point name could not be located in the dynamic link library filename.

EXCEPTION

A real-mode application issued a floating-point instruction and floating-point hardware is not present.

EXCEPTION

Array bounds exceeded.

EXCEPTION

Floating-point denormal operand.

EXCEPTION

Floating-point division by zero.

EXCEPTION

Floating-point inexact result.

EXCEPTION

Floating-point invalid operation.

EXCEPTION

Floating-point overflow.

EXCEPTION

Floating-point stack check.

EXCEPTION

Floating-point underflow.

EXCEPTION

Integer division by zero.

EXCEPTION

Integer overflow.

EXCEPTION

Privileged instruction.

EXCEPTION

Possible deadlock condition.

Fatal System Error

The name system process terminated unexpectedly with a status of address. The system has been shutdown.

File Not Found

The file filename does not exist.

Floppy Disk Error

While accessing a floppy disk, the track address from the sector ID field was found to be different than the track address maintained by the controller.

Floppy Disk Error

While accessing a floppy disk, an ID address mark was not found.

Floppy Disk Error

The floppy disk controller reported an error that is not recognized by the floppy disk driver.

Floppy Disk Error

While accessing a floppy-disk, the controller returned inconsistent results via its registers.

Hard Disk Error

While accessing the hard disk, a recalibrate operation failed, even after retries.

Hard Disk Error

While accessing the hard disk, a disk operation failed even after retries.

Hard Disk Error

While accessing the hard disk, a disk controller reset was needed, but even that failed.

Illegal Instruction

An attempt was made to execute an illegal instruction.

Incorrect Network Resource Type

The specified device type (LPT, for example) conflicts with the actual device type on the remote resource.

Incorrect Password to LAN Manager Server

You specified an incorrect password to a LAN Manager 2.x or MS-NET server.

Incorrect System Call Level

An invalid level was passed into the specified system call.

Incorrect Volume

The target file of a rename request is located on a different device than the source of the rename request.

Invalid Lock Sequence

An attempt was made to execute an invalid lock sequence.

Invalid Mapping

An attempt was made to create a view for a section which is bigger than the section.

Invalid Parameter

The specified information class is not a valid information class for the specified object.

Missing System File

The required system file filename is bad or missing.

Network Name Not Found

The specified share name cannot be found on the remote server.

Network Request Timeout

The session with a remote server has been disconnected because the time-out interval for a request has expired.

No Disk

There is no disk in the drive.

Please insert a disk into drive drive letter.

No Paging File Specified

No paging file was specified in the system configuration.

Not Enough Quota

Not enough virtual memory or paging file quota is available to complete the specified operation.

Not Implemented

The requested operation is not implemented.

Operation Failed

The requested operation was unsuccessful.

Ordinal Not Found

The ordinal number could not be located in the dynamic link library filename.

Out of Virtual Memory

Your system is running low on virtual memory. Please close some applications. You can then start the System option in the Control Panel and choose the Virtual Memory button to create an additional paging file or to increase the size of your current paging file.

Path Not Found

The path path does not exist.

Privilege Failed

The I/O permissions for the process could not be changed.

Registry File Failure

The registry cannot load the hive (file):

name

or its log or alternate.

It is corrupt, absent, or not writable.

Section Too Large

The specified section is too big to map the file.

Sector Not Found

The specified sector does not exist.

Still Busy

The specified I/O request packet (IRP) cannot be disposed of because the I/O operation is not complete.

The Registry Is Corrupt

The structure of one of the files that contains Registry data is corrupt, or the image of the file in memory is corrupt, or the file could not be recovered because the alternate copy or log was absent or corrupt.

Unable to Create Paging File

The creation of the paging file filename failed (number). The requested size was number.

Unable To Locate DLL

The dynamic link library filename could not be found in the specified path path.

Unable to retrieve browser server list

The list of servers for this workgroup is not currently available.

Unexpected Failure in DebugActiveProcess

An unexpected failure occurred while processing a DebugActiveProcess API request.

You may choose OK to terminate the process, or Cancel to ignore the error.

Unknown Disk Format

The disk in drive drive letter is not formatted properly.

Please check the disk, and reformat if necessary.

Write Protect Error

The disk cannot be written to because it is write protected.

Please remove the write protection from the volume name in drive drive letter.

Wrong Type

There is a mismatch between the type of object required by the requested operation and the type of object that is specified in the request.

Wrong Volume

The wrong volume is in the drive.

Please insert volume name into drive drive letter.