ARP Static Cache Entries Switch to Dynamic

Last reviewed: September 9, 1996
Article ID: Q124797
The information in this article applies to:
  • Microsoft Windows NT Workstation version 3.5
  • Microsoft Windows NT Server version 3.5
  • Microsoft TCP/IP-32 for Windows for Workgroups, version 3.11

SYMPTOMS

If a static ARP (address resolution protocol) cache entry is added (for example, ARP -s inet_addr eth_addr) it occasionally switches to dynamic. Unfortunately, dynamic entries are deleted after two minutes of dormancy.

CAUSE

Whenever ARP receives an ARP request for itself, it updates its ARP cache with the information of the requestor. It does this without respect to the type of an existing entry.

STATUS

Microsoft has confirmed this to be a problem in Windows NT version 3.5. We are researching this problem and will post new information here in the Microsoft Knowledge Base as it becomes available.


Additional reference words: wfw wfwg prodtcp32 3.11 tcpip
KBCategory: kbnetwork kbbug3.50
KBSubcategory: nttcp



THE INFORMATION PROVIDED IN THE MICROSOFT KNOWLEDGE BASE IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND. MICROSOFT DISCLAIMS ALL WARRANTIES, EITHER EXPRESS OR IMPLIED, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL MICROSOFT CORPORATION OR ITS SUPPLIERS BE LIABLE FOR ANY DAMAGES WHATSOEVER INCLUDING DIRECT, INDIRECT, INCIDENTAL, CONSEQUENTIAL, LOSS OF BUSINESS PROFITS OR SPECIAL DAMAGES, EVEN IF MICROSOFT CORPORATION OR ITS SUPPLIERS HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF LIABILITY FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES SO THE FOREGOING LIMITATION MAY NOT APPLY.

Last reviewed: September 9, 1996
© 1998 Microsoft Corporation. All rights reserved. Terms of Use.