Err Msg: Setup Cannot Run In a 386 Enhanced Mode Windows...Last reviewed: November 3, 1997Article ID: Q146465 |
3.51 95
WINDOWS
kbsetup
The information in this article applies to:
SYMPTOMSWhen you attempt to install Windows NT 3.51 on a Windows 95 computer with the "WINNT /B/W" (without quotes) command, the following error message appears:
Setup cannot run in a 386 Enhanced Mode Windows MS-DOS Command Prompt. Exit Windows and run Setup again. Setup cannot continue. Press ENTER to exit. CAUSEThis problem occurs if there is no space between the /B and /W switches for WINNT.EXE.
RESOLUTIONTo correct this problem, type the following at the command line:
WINNT /B /W MORE INFORMATIONThe /W switch allows WINNT.EXE to run in Windows 95. You can use this switch with other WINNT.EXE switches. For example, if you want to create boot floppy disks for CD-ROM or floppy-based Windows NT installation, you can type the following at the command line:
WINNT /OX /W"WINNT /W" allows you to install Windows NT from within Windows, bypassing the drive locking and enhanced driver issues involved with a Microsoft Windows install. Again, this bypasses many of the Windows NT install safety features and is not recommended. When you type "WINNT /?" (without quotes) at the command line, the /W switch is not listed. For more information on the /W switch, please see SETUP.TXT on the Windows NT Server or Workstation 3.51 compact disc. For more information, regarding the /w switch and Windows NT 4.0 please refer to the following article in the Microsoft Knowledge Base:
ARTICLE-ID: Q147012 TITLED : Activating /W Switch to Prevent Rebooting in WinNT |
KBCategory: kbsetup
© 1998 Microsoft Corporation. All rights reserved. Terms of Use. |