HP Design Jet 650C Prints Large HPGL/2 Files SlowlyLast reviewed: November 12, 1997Article ID: Q147241 |
3.10 3.50 3.51
WINDOWS
kbprint kb3rdparty
The information in this article applies to:
SYMPTOMSHewlett-Packard (HP) Design Jet 650C prints large HPGL/2 files slowly.
CAUSEThe following is an excerpt from the dj650c FAQ available on the HP WEB site:
The HP Design Jet 650C plotter has an I/O limit of 10KB/sec when printing HP GL/2 files. When printing large files, ie: greater than physical RAM of the printing device, the I/O limit of the printer slows performance. Once the spooler has filled the maximum RAM on the printing device the I/O is limited to 10 KB/sec with HP GL/2 files and 60 KB/sec with HP RTL files.The HP Design Jet 650C on-board RAM can be expanded to 68 MBs. Chips are available in 4, 8, 16, and 32 MBs. More information about the capabilities of the HP650c may be found on the internet at the following World Wide Web site:
ftp.hp.com/pub/plotters/support_doc/dj650c.faqThe products included here are manufactured by vendors independent of Microsoft; we make no warranty, implied or otherwise, regarding these products' performance or reliability.
|
KBCategory: kbprint kb3rdparty
© 1998 Microsoft Corporation. All rights reserved. Terms of Use. |