Erratic Domain Logon from Windows 95 Dial-Up Networking

Last reviewed: January 13, 1998
Article ID: Q150053
The information in this article applies to:
  • Microsoft Windows NT Workstation version 3.51, and 4.0 -Microsoft Windows NT Server version 3.51, and 4.0
  • Microsoft Windows 95

SYMPTOMS

Remote connection to a Windows NT domain fails using the Windows 95 Dial-Up Networking (DUN) client. Your logon scripts will not run, and you get the following error message:

   No domain server was available to validate your password.
   You may not be able to gain access to some network resources.

Following this error you may be prompted with the domain logon dialog box requesting your user name, password, and domain name. In most cases you will eventually be able to connect but without domain validation.

CAUSE

This problem occurs when you use a portable computer that was once connected locally to a LAN through a network interface card (NIC). The computer's NIC was not removed or disabled, and the first two octets of the DHCP-assigned subnetted class B IP address are the same for both the NIC and the dial-up adapter.

WORKAROUND

Create a hardware profile for remote connections that does not include the NIC as part of the installed hardware.

NOTE: After you have configured more than one hardware profile for a computer running Windows 95, a menu automatically appears during the booting process listing all available hardware profiles as numbered choices. The user may choose only one per computing session.

STATUS

Microsoft has confirmed this to be a problem in Windows NT and Windows 95. We are researching this problem and will post new information here in the Microsoft Knowledge Base as it becomes available.

A potential fix for this issue is documented in the following article in the Microsoft Knowledge Base:

   ARTICLE-ID:  Q154434
   TITLE:       Err Msg: No Domain Controller Was Available to
                Validate...

MORE INFORMATION

This problem was reported by corporate users who normally connect their portable computers to a corporate LAN when at the office. When they travel, they use a Windows 95 DUN connection to access their company's network resources.

The problem usually appears under the following circumstances:

  1. A portable computer running Windows 95 is connected to a local LAN using TCP/IP. The laptop NIC gets a DHCP-assigned, subnetted class B address.

  2. Later, the computer is physically disconnected from the LAN, but the NIC remains in the computer.

  3. From a remote location, the user attempts to dial in to an NT RAS server that allows access to the company's LAN.

  4. The NT RAS server uses DHCP to assign an IP address to the remote DUN client.

  5. If the first two octets of the subnetted class B address are the same for the client's NIC as for the PPP connection through the dial-up adapter, then the access problem may appear.


Additional query words: remote access service dial-up Win95
Keywords : NTPROTOCOL NTRAS NTSrvWkst
Version : 3.51 95 4.0
Platform : winnt


THE INFORMATION PROVIDED IN THE MICROSOFT KNOWLEDGE BASE IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND. MICROSOFT DISCLAIMS ALL WARRANTIES, EITHER EXPRESS OR IMPLIED, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL MICROSOFT CORPORATION OR ITS SUPPLIERS BE LIABLE FOR ANY DAMAGES WHATSOEVER INCLUDING DIRECT, INDIRECT, INCIDENTAL, CONSEQUENTIAL, LOSS OF BUSINESS PROFITS OR SPECIAL DAMAGES, EVEN IF MICROSOFT CORPORATION OR ITS SUPPLIERS HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF LIABILITY FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES SO THE FOREGOING LIMITATION MAY NOT APPLY.

Last reviewed: January 13, 1998
© 1998 Microsoft Corporation. All rights reserved. Terms of Use.