XFOR: Installing Proxy Address Generator for LinkAge Notes

Last reviewed: January 10, 1998
Article ID: Q169458

The information in this article applies to:

Microsoft Exchange Server, version 5.0

SUMMARY

In a multiple-site environment, sites other than the site where LinkAge Notes Connector is installed need the proxy generator and the address template to send and receive mail with the connected systems.

The following instructions identify the steps necessary to install the proxy generator and the address template for the LinkAge Notes Connector on a site separate from the site where the connector is installed.

MORE INFORMATION

The following files are required for these steps and can be obtained from the c:\linkage\install directory on the currently installed LinkAge Notes Connector: Mexitmpl.exe, Mexiaddr.exe, Ntspxgen.dll, Ntsscr.blt, Ntsadt.blt, and Ntsadt.hlp
Create a c:\linkage\install directory on the Exchange Server computer in the site where the proxy generator and the address template are to be installed, and copy the above files to this directory.
Create a directory where the Notes proxy address generator will exist:
```
      \\MEXServerName\address\NOTES\i386
```
Copy the Notes proxy address generator (Ntspxgen.dll) to the directory just created (\\MEXServerName\address\NOTES\i386).

Run the following command from the c:\linkage\install directory to install the Notes address template on the Exchange Server computer:

            mexitmpl "/org=MEXOrganization" "/site=MEXSite"
      "/Server=MEXServerName" /ADDRTYPE=NOTES
            /SYNTAX=c:\linkage\install\ntsscr.blt
      /ADDRESS_DT=c:\linkage\install\ntsadt.blt
            /LANGUAGE=409 /FILE=c:\linkage\install\ntsadt.hlp
      /DATA16=c:\linkage\install\ntsadt.hlp
            /DATA32=c:\linkage\install\ntsadt.hlp /SF

Check the following files to see if any errors occurred with the above command:

      Lmeistat.txt
      Lmeilog.txt

Run the following command from the c:\linkage\install directory to install the proxy address rule and to optionally generate proxy addresses:

            mexiaddr "/org=MEXOrganization" "/site=MEXSite"
      /Server=MEXServerName"  /ADDRTYPE=NOTES
            /MACHINE=I386
      “/PROXYRULE=NOTES:&d/MEXSite/MEXOrganization@NotesForeignDomainForExc
      hange”
            /PROXYDLL=c:\linkage\install\ntspxgen.dll  /SF

NOTE: The text of the preceding command has been wrapped for readability. The break in the fourth line at the "c" character is not necessary when you type this command at your command prompt.

   If proxy addresses are NOT to be generated, then insert /NOGENADDR
   before the /SF.

   Check the following files to see if any errors occurred with the above
   command:

      Lmeistat.txt
      Lmeilog.txt

Keywords          : XFOR kbusage
Version           : WinNT:5.0
Platform          : WINDOWS
Issue type        : kbhowto

================================================================================

THE INFORMATION PROVIDED IN THE MICROSOFT KNOWLEDGE BASE IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND. MICROSOFT DISCLAIMS ALL WARRANTIES, EITHER EXPRESS OR IMPLIED, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL MICROSOFT CORPORATION OR ITS SUPPLIERS BE LIABLE FOR ANY DAMAGES WHATSOEVER INCLUDING DIRECT, INDIRECT, INCIDENTAL, CONSEQUENTIAL, LOSS OF BUSINESS PROFITS OR SPECIAL DAMAGES, EVEN IF MICROSOFT CORPORATION OR ITS SUPPLIERS HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF LIABILITY FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES SO THE FOREGOING LIMITATION MAY NOT APPLY.

Last reviewed: January 10, 1998
© 1998 Microsoft Corporation. All rights reserved. Terms of Use.