How to Enable and Interpret the Smtp.log FileLast reviewed: December 15, 1997Article ID: Q155455 |
The information in this article applies to:
SUMMARYThis article discusses the entries found in the Smtp.log file, and is intended to be used as a reference when you have tried all other troubleshooting steps. Most SMTP transmission errors are related to either hardware configuration errors (modem, serial port, initialization string), TCP/IP connectivity problems, or problems with the client computer. In addition, this article provides basic background information on SMTP and the extensions to SMTP, ESMTP. Please note that the information contained in this article is based on information obtained from documents made freely available by the Internet Engineering Task Force (IETF). These documents, called Requests-for- Comments (RFC), are living documents. As such, the information presented here is only as current as the RFCs used to research these articles. When RFCs are updated or made obsolete, the original RFC number is preserved. Any RFC that has been updated or made obsolete is modified to contain the newer RFC number. The RFCs used in the research for this article are:
RFC821 - Simple Mail Transfer Protocol (SMTP) RFC1869 - SMTP Service Extensions (ESMTP)RFCs can be obtained, free of charge, on the Internet at ds.internic.net. This site accepts HTTP, anonymous FTP, and TELNET connections.
MORE INFORMATIONThe remainder of this article is organized into two sections: "SMTP Basics" and "Interpreting the Smtp.log File."
SMTP BasicsThis section includes a general introduction to SMTP design, connections, and session commands and syntax.
SMTP is used by email clients to send messages to an SMTP server, and by SMTP servers to transport messages between intermediate 'hops' before delivery to a POP3 mailbox. The POP3 protocol, not covered in this article, is used to retrieve messages from a mailbox. For more information on POP3 and its use with Microsoft products, please see the following article in the Microsoft Knowledge Base:
ARTICLE-ID: Q155515 TITLE : How to Enable and Interpret the Pop3.log FileBecause messages regularly contain information that contains values not within this range, there have been facilities designed to handle non-US ASCII data. When a message has content not defined within US ASCII (such as audio samples or bitmaps), a multiple-object facility, such as MIME, is used to encode it prior to transmission. Support for any form of encoding is contained within the mail client. If a mail client receives a message containing encoded information, and the client does not support content encoding, the user will generally see gibberish. NOTE: There is an update to the existing SMTP specification known as the Extension to SMTP (ESMTP). Not all mail servers on the Internet are ESMTP- capable, however they are becoming increasingly more common. SMTP transfers involve a sender-receiver model where each participant can send, receive, and interpret session status messages from the other. The sender can connect directly to the terminal destination of the message or an intermediary. The SMTP session is initiated by the sender and can be terminated by either the sender or the receiver.
NOTE: To change this value in Microsoft Internet Mail and News (IMN), use the following steps:
For the purpose of discussion, the peers in an SMTP session will be differentiated into SMTP-sender and SMTP-receiver. The sender is assumed to be either mail client software or another SMTP server. The receiver is always an SMTP server, except in the case where an SMTP server is delivering mail to a POP3 mailbox. Certain semantics are always followed in SMTP connections. One is that any command issued from the SMTP-sender will always receive a response. Responses are both meta-linguistic and numeric and take two basic forms: OK(250) and an error or failure code followed by appropriate verbiage. It is stated explicitly in RFC821 that all command-response sequences occur one at a time. Progress from one command to another is not possible until a response to a previous command has been received. For a complete list of error codes, see RFC821. In addition, the scope of this article covers the commands most likely to be seen while examining the Smtp.log produced by IMN. For a complete listing and explanation of SMTP and ESMTP commands, see the respective RFCs. The order of the commands presented below does not imply that there are no other possible sequences of commands. The following commands and explanations outline a simple connection. The following abbreviations are used in this article:
SP : SPACE <ASCII 20h (32d)> CRLF : CARRIAGE RETURN+LINEFEED <ASCII 0Dh+0Ah (13d+10d)>The following notation is used when explaining reply codes:
nnn : numeric reply code <...> : code meaning () : text message may be present, wording varies [...] : comments When an SMTP-sender wishes to send mail, it first opens a connection to TCP port 25 on the SMTP-receiver. When the connection is established, the SMTP-receiver responds with the system-ready reply code: 220-<domain name>. When troubleshooting SMTP connections, if upon connection a system-ready response is not received, the server may be malfunctioning or down. For more information on troubleshooting SMTP connections, please see the following article in the Microsoft Knowledge Base:
ARTICLE-ID : Q154578 TITLE : Troubleshooting Problems Connecting to Mail Servers. After 220-<domain> is received, the SMTP-sender starts the session by issuing one of two HELLO commands. The type of HELLO command determines if SMTP or ESMTP will be used:
For SMTP : HELO SP <sender name> CRLF For ESMTP : EHLO SP <sender name> CRLFNot only does the HELLO command start a session, it also verifies that both the sender and receiver are in the initial states. Being in the 'initial' state simply means that there are no transactions-in-progress,or that the receiver has not 'hung.' Expected responses to the HELLO command are:
For HELO : 250-<requested mail action okay, completed> (receiver name)
For EHLO : 250-<requested mail action okay, completed> (receiver name)
250-(extended services supported...)
250-(...end-of-list)
or
502-<command not implemented>
504-<command parameter not implemented> [ESMTP not supported]
For Both : 421-<service not available, closing channel> (domain)
500-<syntax error, command unrecognized>
501-<syntax error in arguments> (suggested use) [not likely]
If the SMTP-receiver gets an error response to the EHLO command, it must
either issue the HELO or QUIT commands.
NOTE: The 421 reply can be used in response to any command if the server knows that the SMTP service is not available or if the server is about to shut down.
MAIL FROM: <reverse-path> CRLFThe <reverse-path> value is passed as an argument, and can be either 'user@host.dom' or just 'user.' In the event 'user' is what is passed tothe server, the server's domain name will be tacked onto the end. The <reverse-path> is the address to which any response will go. For example, "MAIL FROM: jdoe@somewhere.com" would be a valid MAIL command. By the same token, "MAIL FROM: jdoe" would also work. If the MAIL command has been received correctly,
250-<requested mail action okay, completed> ()is expected in reply. Expected alternate responses to the MAIL command are:
Error : 421-<SMTP service not available; server shutdown imminent>
500-<syntax error, command unrecognized>
501-<syntax error in arguments> ()
Failure : 451-<req. action aborted: local error in processing>
452-<req. action not taken: insufficient system storage>
552-<req. mail action aborted: exceeded storage allocation>
The RECIPIENT command follows a 250 response from the MAIL command. It is used to specify either a single recipient, multiple recipients, or a mailing list. The command is issued as follows:
RCPT TO: <forward-path> CRLFThe <forward-path> value is passed as an argument, and can be either 'user@host.dom' or just 'user.' In the event 'user' is what is passed tothe server, the server's domain name will be tacked onto the end. The <forward-path> is the address to which the message will be delivered. The forward-path value can contain two different types of addressing data:
Destination address : USER@HOST2.DOM or USER Source route : @HOST1.DOM:USER@HOST2.DOMMost RCPT TO: entries will be observed with the destination address version of the forward-path value. For more information on the handling of source routes, please see RFC821. For example, "RCPT TO: janed@elsewhere.com" would be a valid RECIPIENT command. By the same token, "RCPT TO: janed" would also work, provided that user's POP3 mailbox is on the same server that originated the message. If the RECIPIENT command has been received correctly, we expect:
250-<requested mail action okay, completed> ()in reply. Expected alternate responses to the RECIPIENT command are:
Error : 421-<SMTP service not available; server shutdown imminent>
500-<syntax error, command unrecognized>
501-<syntax error in arguments> ()
503-<bad sequence of commands>
Failure : 450-<req. mail action not taken: mailbox unavailable>
451-<req. action aborted: local error in processing>
452-<req. action not taken: insufficient system storage>
550-<req. action not taken: mailbox unavailable>
551-<user not local; please try <forward-path>>
552-<req. mail action aborted: exceeded storage allocation>
553-<req. action not taken: mailbox name not allowed>
When all the recipient addresses for a message have been entered, and the SMTP-receiver has issued a 250 reply, the next command to follow is the DATA command. The command syntax is:
DATA CRLFThe SMTP-receiver will respond with
354-<start mail input; end with <CRLF>.<CRLF>> ()if the DATA command and the information sure to follow can be processed at that time. If the 354 reply is received, all of the information that comprises the message: headers, body text, encoding, etc. will be streamed to the SMTP-receiver. There are two times that we expect a response to the issuance of the DATA command: after it is issued, and when it completes. Completion of the DATA command is marked the SMTP-receiver's reception of the <CRLF>.<CRLF> sequence. Expected alternate responses to issuance of the DATA command are:
Success : 354-<start mail input; end with <CRLF>.<CRLF>> ()
Error : 421-<SMTP service not available; server shutdown imminent>
500-<syntax error, command unrecognized>
501-<syntax error in arguments> ()
503-<bad sequence of commands>
Failure : 451-<req. action aborted: local error in processing>
554-<transaction failed>
Expected alternate responses to completion of the DATA command are:
Success : 250-<requested mail action okay, completed> ()
Failure : 451-<req. action aborted: local error in processing>
452-<req. action not taken: insufficient system storage>
552-<req. mail action aborted: exceeded storage allocation>
554-<transaction failed>
When the RESET command is issued, all of the SMTP-receiver's buffers are cleared. Typically, this command is issued upon connection, after the HELLO command, to cancel a current MAIL command, or after a DATA command is completed. Usage of the RESET command follows:
RSET CRLFThe SMTP-receiver must respond with
250-<requested mail action okay, completed> ()Any other response would indicate that the command was entered improperly (not likely when a program does it) or that there is a problem with the SMTP-receiver. The possible responses are listed below.
Error : 421-<SMTP service not available; server shutdown imminent>
500-<syntax error, command unrecognized>
501-<syntax error in arguments> ()
504-<command parameter not implemented>
The NO OPERATION command has no effect whatsoever on the connection. It does not affect any of the SMTP-receiver's buffers, or any MAIL transaction currently in progress. It can be used by the SMTP-sender to keep the connection open in lieu of an SMTP-receiver timeout. Usage follows:
NOOP CRLFThe SMTP-receiver should send a 250 reply to the NO OPERATION command. The only other possible responses are a 500 reply, indicating incorrect command syntax, or the 421 reply, indicating that the SMTP service will be shutting down shortly.
QUIT CRLFUpon reception of a QUIT command, the SMTP-receiver issues the following response to the SMTP-sender:
221-<<domain> service closing transmission channel>The only other possible response is a 500 reply which indicates that the syntax used was incorrect. This is not likely to occur.
Interpreting the Smtp.log FileSMTP logging is not enabled by default. To enable SMTP logging in Outlook Express, click Options on the Tools menu, click the Advanced tab, and then click the Mail Transport check box to select it. To enable SMTP logging in Internet Mail and News, you must add or change the following entries in the registry:
HKEY_CURRENT_USER\Software\Microsoft\Internet Mail and News\Mail Value Name : "Log SMTP (0/1)" (without quotes) Value Type : dword Value Data : 00000001 Value Name : "Log File (SMTP)" (without quotes) Value Type : string Value Data : <path to log file>In order to fit all the pertinent data for each entry on one line, the 'SMTP:' tag and the time stamp at the beginning of each line have beenremoved.
Log ExampleThis is a fault-free connection in which one message is sent to an SMTP server with ESMTP extensions enabled.
01) Microsoft(r) Plus! for Windows(r) 95 4.70.1155 02) SMTP Log started at Thu Aug 01 17:22:27Lines 1 and 2 are plugged in every time Internet Mail and News is launched.
03) [db] Connecting to 'smtp.host.com'. 04) [db] srv_addr = nnn.nnn.nnn.nnnLines 3 and 4 indicate the friendly name and the IP address of the SMTP server specified in the Internet Mail and News configuration.
05) [rx] 220 smtp.host.com ESMTP server ready Thu, 1 Aug 1996 15:24:22 -
0700
06) [tx] EHLO smtp-client
07) [rx] 250-smtp.host.com
08) [rx] 250-HELP
09) [rx] 250-EXPN
10) [rx] 250-XREMOTEQUEUE
11) [rx] 250 PIPELINING
12) [tx] RSET
13) [rx] 250 Ok resetting state
Line 5 indicates that the communications channel between the SMTP sender
and receiver has been successfully opened. This prompts the EHLO command
to start an ESMTP session. Note that the EHLO command is followed by the
computer name of the client, not the user-id that is sending mail.
Lines 7-11 form the SMTP-receiver's response to the EHLO command. This tells us that the server implements:
a) the standard SMTP HELP and EXPN commands b) one nonstandard SMTP extension XREMOTEQUEUE c) one standard SMTP extension PIPELININGThe SMTP-sender issues the RSET command on Line 12 as a precautionary measure to flush the SMTP-receiver's forward- and return-path, mail data, and transaction buffers.
14) [tx] MAIL FROM:<jdoe@somewhere.com> 15) [rx] 250 Sender <jdoe@somewhere.com> OkLine 14 shows the MAIL command issued with the required <reverse-path> argument. In Line 15, the SMTP-receiver send the 250 reply, re-stating the SMTP-sender's reverse-path. Only the 250 reply is absolutely required, not all SMTP servers will supply this information, or in the same format.
16) [tx] RCPT TO:<janed@elsewhere.com> 17) [rx] 250 Recipient <janed@elsewhere.com> OkIn Line 16, the SMTP-sender issues the RECIPIENT command with the <forward-path> argument. The SMTP-receiver returns the 250 reply reiterating the destination address.
18) [tx] DATA 19) [rx] 354 Ok Send data ending with <CRLF>.<CRLF> 20) [tx] 21) . 22) [rx] 250 Message received: 19960801222422078.AAA43@smtp-clientThe SMTP-sender issues the DATA command in Line 18, gets the go-ahead from the SMTP-receiver, and begins transmitting the content of the message. Because messages that contain encoded objects can be several thousand bytes in size, the log file does not display the transmitted data. Only the <CRLF>.<CRLF> sequence (line 21) is shown. In Line 22, the SMTP-receiver acknowledges the message, stamps it with an SMTP-id, and transmits it.
23) [tx] QUIT 24) [rx] 221 smtp.host.com ESMTP server closing connection 25) [db] Connection to 'smtp.host.com' closed.The SMTP-sender issues the QUIT command. The 221 reply indicates that the SMTP-receiver has accepted the QUIT command and closed the connection, evidenced in Line 25. This example is typical of most SMTP sessions. In the event that the SMTP- sender has more than one message queued in the Outbox, the session will recurse the RESET->MAIL->RECIPIENT->DATA sequence until all messages have been sent. If the Smtp.log file you are examining contains any response other than the expected positive response for any of the commands issues (except EHLO in a non-ESMTP environment), refer to the section in this article dealing with that command. This article is intended as a reference to be used when all other troubleshooting has failed. The majority of SMTP transmission errors are going to be related to either hardware configuration errors (modem, serial port, initialization string), TCP/IP connectivity problems, or client-side malfunction. As a general rule, always rule out any other possible source of error before troubleshooting an odd log file entry.
|
KBCategory: kbtshoot kbref
© 1998 Microsoft Corporation. All rights reserved. Terms of Use. |