Plus Hard Card Conflicts with Mouse Port if Set to IRQ 12Last reviewed: September 16, 1996Article ID: Q84809 |
The information in this article applies to:
SUMMARYThe Plus Hard Card conflicts with a Microsoft Mouse connected to a PS/2 style port if the card is set to IRQ 12. The cards do not come set to IRQ 12 from the factory, but some of the Hard Cards are user- configurable. If this is the case, the Hard Card should be changed to another IRQ setting. If the Hard Card is set to IRQ 12 and the Microsoft Mouse is connected to the PS/2 port, IRQ conflicts occur in Windows 3.0 and 3.1, as well as MS-DOS based applications that support the Microsoft Mouse. This is not a problem with the Microsoft Mouse, but rather a hardware configuration issue
MORE INFORMATIONPS/2 mouse ports use IRQ 12 to communicate with the central processor unit (CPU). The following Plus Hard Cards have the capability of using IRQ 12, which conflicts with a Microsoft Mouse using the PS/2 port.
Hard Card II (40 MB, 80 MB) Hard Card IIxl (50 MB, 105 MB)These drives are not set to IRQ 12 by default. If you set it to IRQ 12, and you subsequently purchase a Microsoft PS/2 style mouse, the Microsoft Mouse cannot work. The only workaround is to use the mouse on a serial port, or to change the IRQ settings on the card. The product included here, Plus Hard Card, is manufactured by a vendor independent of Microsoft; we make no warranty, implied or otherwise, regarding this product's performance or reliability.
|
KBCategory: kbhw kb3rdparty
© 1998 Microsoft Corporation. All rights reserved. Terms of Use. |