OFF95: Contents of the Ofreadme.txt FileLast reviewed: October 15, 1997Article ID: Q137098 |
The information in this article applies to:
SUMMARYThe following is the contents of the Ofreadme.txt file that comes with Microsoft Office for Windows 95, version 7.0.
MICROSOFT OFFICE FOR WINDOWS 95Supplemental Information
CONTENTS
Setup - General Setup on Windows 95 (or later) Customizing Your Windows 95 Start Menu Features No Longer Available in the Typical Installation Upgrading over Office 94 Setup on Windows NT 3.51 (or later) Using Disks with Distribution Media Format (DMF) Updates to Getting Results with Microsoft Office for Windows 95, standard version Adding Microsoft Network Shortcuts Windows NT and Office for Windows 95 Using Help on Windows NT 3.51 Removing Earlier Office Version's Help Files From Path statement Location of Templates for Binder in Office for Windows 95 Setup for International Users Lotus cc:Mail or Lotus Notes Running Microsoft Office from the CD-ROM Percentage Use of Hard Disk Drive and Size Requirements for Installation Options Running Access 2.0 With Office 95 Standard Handling Energy Star Monitor Problems While Running on a Network Error Message Removing the Office CD During Setup_________________________________________________ [Setup - General] Microsoft Office for Windows 95 requires Windows 95 (or later) or Windows NT 3.51 (or later) releases. All of the applications in Microsoft Office for Windows 95 Standard and Microsoft Office for Windows 95 Professional are version 7.0. [Setup on Windows 95 (or later)] When you install Microsoft Office for Windows 95, the Setup program for Office will not be installed on your hard disk drive. New shared components of Office for Windows 95 will be installed in the folder \Program Files\Common Files\Microsoft Shared. However, if you already have some installed shared components, the Setup program will leave the old files in the \Windows\Msapps folder, and install the Office 95 shared files to the new location. If you uninstall Office for Windows 95, the MSOffice folder, which may contain templates or documents that you modified, is not deleted. If you want to reinstall Office later and preserve these files in a separate folder, you will need to create a new folder and copy those files to the new location. Simply renaming the old folder can cause Windows to associate the two folder names, which may lead to some confusion for the new Office installation. Microsoft Office Fast Start is automatically loaded into the Windows 95 Startup folder when you install Office for Windows 95. This utility increases the overall performance of the Office applications. It loads the OLE DLLs at the start up of Windows 95. Once loaded, these DLLs remain in memory for the entire Windows session. Fast Start cuts time off the following scenarios: launching Office applications, opening Office documents, saving Office documents; using the Copy and Paste commands between applications, and printing. Selecting the icon that appears on the Windows 95 Start Up folder for Fast Start will not bring up a user interface. [Customizing Your Windows 95 Start Menu] If you install Office for Windows 95 over Office 4.x, you will want to delete the Start menu shortcuts from Office 4.x. To do this:
[Features No Longer Available in the Typical Installation] To install the following features:
[Upgrading over Office 94] If you are using Office 94, it is easy to upgrade to Office 95. To save space on your hard disk drive, you should uninstall Office 4.x before installing Office 95. [Setup on Windows NT 3.51 (or later)] If you are installing on Windows NT 3.51, you will need to obtain an updated version of an NT 3.51 system file named WINSRV.DLL. This file will be contained in Service Pack 1 for NT 3.51. The Service Pack will also address some issues with the Help on Windows NT 3.51 and contain other enhancements. Once the Service Pack is available, NT 3.51 users will be able to access it the following way: This file can be obtained by For Internet Access:
ftp ftp.microsoft.com logon anonymous cd bussys/winnt/winnt-public/fixes/usa/nt351 bin get <Latest Service Pack for NT 3.51>If you are running a dual boot system with Windows NT 3.51 and Windows 95, you must install Office 95 twice, once for each system. If you install Office 95 in one language version on Windows NT 3.51 in another language version, Office 95 setup will not be able to detect the startup files. It will create a new startup group named in the language of the Office 95 version. Therefore, the startup files installed in this group will not launch automatically. Installing Microsoft Excel for Windows 95, PowerPoint for Windows 95, or Microsoft Project for Windows 95 on a machine running Microsoft Excel 5.0 for Windows NT (not 16-bit Excel 5) will corrupt the previously installed version of Microsoft Excel 5.0 for Windows NT because some files used by Microsoft Excel 5.0 will be updated when installing Office 95. [Using Disks with Distribution Media Format (DMF)] With the exception of the Setup disk (Disk 1), your Microsoft Office disks use a new format called DMF (Distribution Media Format). DMF increases the capacity of a 3.5-inch floppy disk, which reduces the number of disks needed to install your application and speeds up installation. Because DMF is a new format, many existing utilities such as Norton Disk Doctor, Microsoft ScanDisk, MS-DOS DiskCopy, and Microsoft Windows Copy Disk do not recognize DMF. You should NOT use disk utilities to examine a DMF formatted disk, as these utilities can corrupt the DMF disk. You cannot copy DMF formatted disks using MS-DOS DiskCopy or Microsoft Windows Copy Disk ( If you want to copy files from the Setup disks, see "Extracting Files from DMF Disks," later in this file.). Windows 95, Windows 3.1 (or later), and Windows NT 3.5 (or later) support DMF. If there is a chance that your system has a virus, you should run a recently updated virus detection utility such as F-prot before installing Microsoft Office for Windows 95. Otherwise Disk 2 and higher may become infected with the virus. Extracting Files from DMF Disks If you need to copy the Microsoft Office disks onto a network server or other permanent storage drive, you may use the copy switch (/C) with the EXTRACT.EXE utility on Disk 1 to copy the Microsoft Office installation files to the target location. For example, after creating a directory called C:\DISKS on your hard disk drive for the Microsoft Office files, copy all the files on Disk 1 to that directory. (Since Disk 1 does not use DMF, you can use the standard MS-DOS Copy command, COPY A:\*.* C:\DISKS.) Switch to drive A and type the following command to copy the rest of the disks to the directory C:\DISKS:
FOR %I IN (*.*) DO C:\DISKS\EXTRACT /C A:\%I C:\DISKS\%IA cabinet (.CAB) file includes many files stored as a single file. If you need only a single file that is contained in one of the cabinet files, you may search for it using the /D switch with EXTRACT.EXE. Once you find the file, you can use EXTRACT.EXE again to copy the file to the desired location. You can also type EXTRACT /? to get help on the EXTRACT command options. Here are some examples of how to use the EXTRACT command to find files. To list all files in a cabinet file:
EXTRACT /D A:\<cabinet filename>To list all EXE files in a cabinet file:
EXTRACT /D A:\<cabinet filename> *.EXEHere are some examples of how to use EXTRACT to copy a single file out of a cabinet file. To extract ANY.EXE to the current directory:
EXTRACT A:\<cabinet filename> ANY.EXETo extract ANY.EXE to C:\OFFICE:
EXTRACT A:\<cabinet filename> /L C:\OFFICE ANY.EXE[Updates to Getting Results with Microsoft Office for Windows 95, standard version] For errata in Getting Results with Microsoft Office for Windows 95 on specific applications, see the readme.txt in the application's folder. Graphics filters licensed from Henderson Software, Inc., are not part of the product and should not be on the copyright page. The Btrieve driver, Btrieve Technologies, Inc., is not part of the product and should not be on the copyright page. Pages 27 and 29: The correct online location of the Network Install Readme is in the Getting Help section of the application's online Help table of contents. Page 28: The name of the Remove button has been changed to the Add/Remove button. Therefore, step 5 should read, "Click the Office application, and click the Add/Remove button. Page 29: The list of Readme files in the Office folder should include BINDER.TXT. Page 29: The correct procedure for starting an Office application is "Click the Start button, click Programs, and then click the application you want. Adding Microsoft Network Shortcuts You can add any MSN shortcuts to the Microsoft Network shortcut list, available from the Help menu of each Office application, by simply moving or copying the shortcuts to the Office95\Office\MSN folder. [Windows NT and Office 95] In both Windows NT 3.51 and Windows 95, you can right click on a filename in the File Open dialog box for all Office applications to get a shortcut menu. However, when running on Windows NT the shortcut menu does not have the Copy and Delete commands. When running from the network on Windows NT, the Office Shortcut Bar will not display the correct icons. This means that the default buttons "Make an Appointment," "Add a Task," and "Add a Contact," as well as the applications, will have generic icons. They will, however, work correctly. [Using Help on Windows NT 3.51 Without Service Pack 1] If the Answer Wizard is launched from the Help menu when a Help topic or Help dialog is open, Help may not function. When you are working in a Visual Basic Module in Microsoft Excel, you may not be able to use context sensitive Help. To use Help in a module, use the Answer Wizard or the online Help index. [Removing Earlier Office Version's Help Files From Path statement] On a machine with both Office 95 and a previous version of Office, Office 95 may load the previous version's Help files. To correct this, edit the Path statement in AUTOEXEC.BAT to remove the reference to the previous version's directory location. [Location of Templates for Binder in Office 95 Setup for International Users] The following Binder templates that have the page settings set to A4 paper size are located in the Value Pack rather than in the Typical installation: Client Billing, Meeting Organizer, Proposal and Marketing Plan, and Report. [Lotus cc:Mail or Lotus Notes] Microsoft Office supports Vendor Independent Messaging (VIM) 1.0, which means that you can use the Send and Add/Edit Routing Slip commands (File menu) in Microsoft Office to send or route Microsoft Office documents with mail applications such as Lotus cc:Mail that support VIM 1.0. Lotus cc:Mail 1.11 users may get VIM support files from Lotus. In order for Microsoft Office to use VIM mail applications the DOS PATH command in the AUTOEXEC.BAT file must include the directory in which the mail application's VIM support files are stored. If the PATH does not include the directory containing the VIM support files then setup will not install VIM support for Microsoft Office and Microsoft Office will not function correctly when sending mail. The Microsoft Office support files for VIM 1.0 are called MAPIVI32.DLL and MAPIVITK.DLL, and both are installed in the System subdirectory of the Windows program directory. There are known problems with Lotus Notes 3.3 TCP/IP network protocol support which are being addressed in a future version of Lotus Notes. These problems will prevent Microsoft Office from sending mail through the current versions of 16 bit Lotus Notes when Lotus Notes is using TCP/IP as its network protocol. Using a protocol other than TCP/IP solves the problem. [Running Microsoft Office from the CD-ROM] Installing Microsoft Office with the "Run from CD-ROM" option takes about 30MB of hard disk drive space. To reduce the size, you can remove one of the following components if you don't need it: Datamaps, located on Program Files\Microsoft Shared\Datamaps folder. OLE servers located in the Program Files\Common Files folder. For the best performance, it is recommended that a drive with 2x or higher speed is used. [Percentage Use of Hard Disk Drive and Size Requirements for Installation Options] (All sizes in kilobytes. Divide the number by 1024 to get the corresponding MB figure)
Compact: Microsoft Excel 6,625 23% Microsoft Word 5,099 18% Microsoft PowerPoint 11,016 39% Office Tools 3,274 12% Microsoft Schedule+ 2,056 7% Graphics Filters 243 1% Total 28,313 100% Typical Microsoft Excel 12,236 21% Microsoft Word 9,718 17% Microsoft PowerPoint 14,947 26% Office Tools 7,159 12% Microsoft Schedule+ 5,781 10% Binder and Shortcut Bar 3,206 6% Data Access 2,080 4% Converters 1,673 3% Graphics Filters 623 1% Total 57,423 100% Complete: Microsoft Excel 24,381 26% Microsoft Word 18,546 20% Microsoft PowerPoint 17,185 18% Office Tools 12,762 14% Microsoft Schedule+ 5,781 6% Binder and Shortcut Bar 3,206 3% Data Access 6,147 7% Converters 3,065 3% Graphics Filters 2,089 2% Total 93,162 100%[Running Access 2.0 With Office 95 Standard] If you are installing Office Standard for Windows 95 on a system where you need to run Access 2.0, Office for Windows 95 and Access 2.0 can coexist on the same system. [Handling Energy Star Monitor Problems While Running on a Network] Due to occasional problems with some Energy Star monitors, it is recommended that you turn off Advanced Power management while running a network installation. To turn off these settings, open the Windows Control Panel, open the Power icon, and select Off in the Power Management control. [Error Message Removing the Office CD During Setup] If during Setup you remove the Office CD from the CD-Rom drive for any reason, you will see a system message. To continue Setup, re-insert the Office CD, press ENTER, and close the Autorun dialog box.
|
Additional reference words: 7.00
© 1998 Microsoft Corporation. All rights reserved. Terms of Use. |