CG3: Clip Gallery General Troubleshooting Tips Part 1 of 2

• Microsoft Clip Gallery for Windows 95, version 3.0
• Microsoft Publisher 97
• Microsoft Office 97 for Windows
• Microsoft PowerPoint 97 for Windows
• Microsoft Word 97 for Windows
• Microsoft Excel 97 for Windows

IMPORTANT: This article contains information about editing the registry. Before you edit the registry, make sure you understand how to restore it if a problem occurs. For information about how to do this, view the "Restoring the Registry" Help topic in Regedit.exe or the "Restoring a Registry Key" Help topic in Regedt32.exe.

SUMMARY

This article contains information to help you troubleshoot problems you may encounter when you start Microsoft Clip Gallery from another program. This article covers the following types of errors:

• Server Application or Source File cannot be found
• Invalid Page Fault in module <Name of Module>
• General Protection Fault in Module <Name of Module>
• Clip Gallery can not run because the database has been marked read-only
• Clip Gallery does not start and no errors are displayed

   ARTICLE-ID: Q162128
   TITLE     : CG3: Clip Gallery General Troubleshooting Tips Part 2 of 2

MORE INFORMATION

Although you can start with any of the following troubleshooting techniques, Microsoft recommends that you start at the top of the list and continue troubleshooting until your problem is resolved or diagnosed.

Does Clip Gallery Function Correctly in Another Program?

1. Start WordPad. To do this, click the Start button, point to Programs, point to Accessories, and click WordPad.

   NOTE: You can use any program that has an Insert Object command to run the tests. In this article, WordPad was chosen to perform the Clip Gallery tests because it comes with Windows 95 and Windows NT 4.0.

2. On the Insert Menu, click Object, and then click Microsoft Clip Gallery. Click OK.

If Clip Gallery does not start, proceed to the next section.

Does Clip Gallery Run from the Compact Disc?

NOTE: If you have Publisher 97 on floppy disks, proceed to the "Test for a Corrupted Artgalry.cag File" section of this article.

1. Insert the Publisher 97 or Office 97 compact disc into the CD-ROM drive.

2. Start Windows Explorer and switch to the Shared\Artgalry folder on the compact disc. For example, if your CD-ROM drive is drive D, go to D:\Shared\Artgalry.

3. Double-click Artgalry.exe from the compact disc. This registers the program as a shared application in the registry of the operating system.

   NOTE: If you receive an error message when you try to register Artgalry.exe from the compact disc, you may be experiencing problems with the registry or with the compact disc.

4. Start WordPad. To do this, click the Start button, point to Programs, point to Accessories, and click WordPad.

5. On the Insert Menu, click Object, and then click Microsoft Clip Gallery. Click OK.

6. If Clip Gallery starts from the compact disc, the copy of Artgalry.exe on your hard disk may be corrupted.

   To copy the contents of the Artgalry folder to your hard disk, follow these steps:

       a. Copy the contents of the Shared\Artgalry folder (except the
          Artgalry.cag file, which is already on your hard disk), to the
          Program Files\Common Files\Microsoft Shared\Artgalry folder.
   

       b. Double-click the Artgalry.exe file to register the copy on your
          hard disk.
   

7. To see if Clip Gallery now runs from your hard disk, follow these steps:

       a. Click the Start button, point to Programs, point to Accessories,
          and click WordPad.
   

       b. On the Insert Menu, click Object, and then click Microsoft Clip
          Gallery. Click OK.
   

Test for a Corrupted Artgalry.cag File

1. Rename the Artgalry.cag file. To do so:

       a. Find the Artgalry.cag file. This file is usually located in the
          Program Files\Common Files\Microsoft Shared\Artgalry folder.
   

       b. Right-click the file icon, click Rename on the shortcut menu, and
          then enter a new name, such as Artgalry.old.
   

2. Try starting Clip Gallery again. To do so:

       a. Start WordPad. To do this, click the Start button, point to
          Programs, point to Accessories, and click WordPad.
   

       b. On the Insert menu, click Object.
   

       c. In the Object Type list, click Microsoft Clip Gallery, and then
          click OK.
   

   NOTE: If the Artgalry.cag file is missing, Clip Gallery creates a new one when you start Clip Gallery. Artgalry.cag is a database file that stores the clip preview images and catalogs the location of each image. Clips you may have manually added to Clip Gallery from other sources are now unavailable. However, this does not remove clipart from Office 97, PowerPoint 97, or Publisher 97, because these programs use concurrent databases and are not affected if you delete the Artgalry.cag file.

   For more information on creating a custom Artgalry.cag, please see the following article in the Microsoft Knowledge Base:

         ARTICLE-ID: Q161718
         TITLE     : CG3: Creating Clip Gallery Packages
   
   

Check the Registry Entries for Clip Gallery

WARNING: Using Registry Editor incorrectly can cause serious problems that may require you to reinstall your operating system. Microsoft cannot guarantee that problems resulting from the incorrect use of Registry Editor can be solved. Use Registry Editor at your own risk.

For information about how to edit the registry, view the "Changing Keys And Values" Help topic in Registry Editor (Regedit.exe) or the "Add and Delete Information in the Registry" and "Edit Registry Data" Help topics in Regedt32.exe. Note that you should back up the registry before you edit it. If you are running Windows NT, you should also update your Emergency Repair Disk (ERD).

NOTE: The following steps assume you are running Windows 95 or Windows NT 4.0. (If you are running Windows NT 3.51, substitute regedt32.exe in step 1.)

1. On the Start menu, click Run. Type "regedit" (without the quotation marks) in the Open box, and then click Open. This starts the Registry Editor.

2. Locate the following registry key:

         My Computer\HKEY_CLASSES_ROOT\MS_ClipArt_Gallery\CLSID
   

       a. Double-click the HKEY_CLASSES_ROOT key. The key looks similar
          to a folder you would see in Windows Explorer.
   

       b. Double-click the MS_ClipArt_Gallery key. You may need to scroll
          through the Registry Editor window to find the key.
   

       c. Click the CLSID key.
   

       d. Verify the value of the key. The MS_ClipArt_Gallery\CLSID key
          should have the following data value:
   

             Name        Data
             ----        ----
             (Default)   "{00030026-0000-0000-C000-000000000046}"
   
   

3. Locate the following registry key:

         My Computer\HKEY_CLASSES_ROOT\MS_ClipArt_Gallery\protocol\
         StdFileEditing\server
   

   Verify the value of the key. The MS_ClipArt_Gallery\protocol\ StdFileEditing\server key should have the following data value:

         Name        Data
         ----        ----
         (Default)   "C:\PROGRA~1\COMMON~1\MICROS~1\ARTGALRY\ARTGALRY.EXE"
   
   

4. Locate the following registry key:

         My Computer\HKEY_CLASSES_ROOT\MS_ClipArt_Gallery.2\CLSID
   

   Verify the value of the key. The MS_ClipArt_Gallery.2\CLSID entry should have the following data value:

         Name        Data
         ----        ----
         (Default)   "{00021290-0000-0000-C000-000000000046}"
   
   

5. Locate the following registry key:

         My Computer\HKEY_CLASSES_ROOT\MS_ClipArt_Gallery.2\protocol\
         StdFileEditing\server
   

   Verify the value of the key. The MS_ClipArt_Gallery.2\protocol\ StdFileEditing\server entry should have the following data value:

         Name        Data
         ----        ----
         (Default)   "C:\PROGRA~1\COMMON~1\MICROS~1\ARTGALRY\ARTGALRY.EXE"
   
      The Data value should be the path to your Artgalry.exe file.
   
      NOTE: The path uses MS-DOS names. This is why you are seeing
      PROGRA~1 instead of the long name: Program Files.
   
   

6. Locate the following registry key:

         My Computer\HKEY_CLASSES_ROOT\CLSID\
         {00021290-0000-0000-C000-000000000046}\LocalServer32
   

   Verify the value of the key. The LocalServer32 entry should have the following data value:

         Name        Data
         ----        ----
         (Default)   "C:\PROGRAM FILES\COMMONFILES\
                     MICROSOFT SHARED\ARTGALRY\ARTGALRY.EXE"
   
      This path uses long file names.
   
   

7. Export the Clip Gallery Keys.

   If any registry entries for Clip Gallery are invalid (for your specific computer and its drive structure) or are missing, you should remove the complete registry keys for Clip Gallery, and then restore them.

   NOTE: If all Clip Gallery registry keys are correct, proceed to the next section.

       a. Locate the following key:
   

             My Computer\HKEY_CLASSES_ROOT\CLSID\
             {00021290-0000-0000-C000-000000000046}
   
       b. On the Registry menu, click Export Registry File. The Export
          Registry File dialog box appears.
   
       c. Save the Registry file on your desktop, and name it Clsidcag3.reg
          or something similar.
   
       d. Locate the following key:
   
             My Computer\HKEY_CLASSES_ROOT\MS_ClipArt_Gallery
   
       e. On the Registry menu, click Export Registry File.
   
       f. Save the Registry file on your desktop. Use a name, such as
          Cag1.reg.
   
       g. Locate the following key:
   
             My Computer\HKEY_CLASSES_ROOT\MS_ClipArt_Gallery.2
   
       h. On the Registry menu, click Export Registry File.
   
       i. Save the Registry file on your desktop and name it Cag2.reg.
   
   

8. Delete the Clip Gallery Keys.

   NOTE: If you have not exported the Clip Gallery Keys, follow the instructions in step g of this section, and export the keys before you continue.

       a. Locate the following key:
   

             My Computer\HKEY_CLASSES_ROOT\
             CLSID\{00021290-0000-0000-C000-000000000046}
   
       b. Press DELETE, and then click Yes on the Confirm Key Delete dialog
          box to delete the entry.
   
       c. Select the following key:
   
             My Computer\HKEY_CLASSES_ROOT\MS_ClipArt_Gallery
   
       d. Press DELETE, and then click Yes to delete the entry.
   
       e. Select the following key:
   
             My Computer\HKEY_CLASSES_ROOT\MS_ClipArt_Gallery.2
   
       f. Press DELETE and then click Yes to delete the entry.
   
       g. After you remove the Registry entries, start Windows Explorer and
          locate the Program Files\Common Files\Microsoft Shared\Artgalry
          folder. Double-click the Artgalry.exe file. This registers the
          Clip Gallery with correct entries.
   
   

9. Try to start Clip Gallery again. If it does not start, proceed to the next section.

   ARTICLE-ID: Q138100
   TITLE     : ClassId Numbers for Shared Applications

   ARTICLE-ID: Q134863
   TITLE     : How to Reregister Shared Programs in Office 95 & 97

Does Clip Gallery Work in Safe Mode? (Windows 95 only)

NOTE: If you are running Windows NT, skip this section and proceed to the "Check the Dates of the OLE32 DLL Files" section.

1. Quit any programs you are running.

2. Click Start, and then click Shut Down to display the Shut Down Windows dialog box.

3. On the Shut Down Windows dialog box, click Restart The Computer.

4. When you see "Starting Windows 95" as the computer starts, press F8 to display the Microsoft Windows 95 Startup Menu.

5. Choose item #3 (Safe mode) on the menu. This starts Windows 95 in Safe Mode without network support. After you are running in Safe Mode, the words Safe Mode appear in all four corners of the screen.

   NOTE: If you are running a shared copy of Microsoft Office, choose item #4 (Safe mode with network support) to test the problem.

6. After Windows 95 starts in Safe mode, open WordPad. Click Start, point to Programs, point to Accessories, and then click WordPad.

7. Start Microsoft Clip Gallery.

       a. On the Insert menu, click Object.
   

       b. In the Object Type list, click Microsoft Clip Gallery, and then
          click OK.
   

   If Clip Gallery does not start, skip to the "Check the Dates of the OLE32 DLL Files" section. If Clip Gallery starts, then restart Windows 95, letting it restart normally.

8. Change your Display Adapter to VGA.

   Safe mode bypasses the current real-mode configuration and loads a minimal protected-mode configuration, disabling Windows 95 device drivers and using the standard VGA display adapter.

   If Clip Gallery starts in Safe mode, you may be experiencing a conflict with your display adapter. Use the following test to determine if a conflict exists with your display adapter.

       a. After Windows 95 restarts, click Start, point to Settings, and
          click Control Panel.
   

       b. In Control Panel, double-click the Display icon.
   

       c. Click the Settings Tab, and then click Change Display Type.
   

       d. Write down your Adapter Type and its Manufacturer so you will
          be able to properly reset it after this troubleshooting step.
   

       e. Click Change (to the right of the Adapter Type entry),
          and then click Show All Devices. Scroll to the top of the
          Manufacturers list and click Standard Display Types to select
          Standard Display Adapter(VGA). Click OK, and then click Close in
          the Change Display Type dialog box. Click Apply in the Display
          Properties window. Click Yes when you are prompted to restart
          Windows.
   

       f. After Windows 95 starts with VGA screen resolution, start
          WordPad. Click the Start button, point to Programs, point to
          Accessories, and then click WordPad.
   

       g. Try starting Clip Gallery again. On the Insert Menu, click Object,
          and then click Microsoft Clip Gallery. Click OK.
   

If Clip Gallery still does not start, proceed to the "Check the Dates of the OLE32 DLL Files" section.

NOTE: To restore your original video driver settings, follow steps 8a, 8b, and 8c. In step 8e, select the Adapter Type and Manufacturer that you wrote down previously. If your driver isn't on the list, click Show All Devices and scroll up the list until you find it. Click OK, and then click Close on the Change Display Type dialog box. Click Apply in the Display Properties window. Click Yes when you are prompted to restart Windows. Your computer should restart with the original driver, and you can adjust the display settings to your original resolution and color depth.

For additional information on Safe Mode, please see the following article in the Microsoft Knowledge Base:

   ARTICLE-ID: Q156126
   TITLE     : Troubleshooting Windows 95 Using Safe Mode

Check the Dates of the OLE32 DLL Files

Clip Gallery requires several OLE32 files. If any of these files are corrupted or missing, Clip Gallery will not function properly. The following table lists the OLE32 files initially installed by the three operating systems under which Clip Gallery can run.

   OLE32 File        Win95      Win NT 3.51     Win NT 4.0
   --------------------------------------------------------

   Compobj.dll      7/11/95       5/26/95        8/2/96
   Ddeml.dll        7/11/95       5/26/95        8/2/96
   Ole2.dll         7/11/95       5/26/95        8/2/96
   Ole2conv.dll     7/11/95       5/26/95        8/2/96
   Ole2disp.dll     7/11/95       5/26/95        8/2/96
   Ole2nls.dll      7/11/95       5/26/95        8/2/96
   Ole32.dll        7/11/95       5/26/95        8/2/96
   Olecli.dll       7/11/95       5/26/95        8/2/96
   Olecli32.dll     7/11/95       5/26/95        8/2/96
   Olecnv32.dll     7/11/95       5/26/95        8/2/96
   Oledlg.dll       7/11/95       5/26/95        8/2/96
   Olesvr.dll       7/11/95       5/26/95        8/2/96
   Olesvr32.dll     7/11/95       5/26/95        8/2/96
   Olethk32.dll     7/11/95       5/26/95        8/2/96
   Storage.dll      7/11/95       5/26/95        8/2/96
   Toolhelp.dll     7/11/95       5/26/95        8/2/96
   Typelib.dll      7/11/95       5/26/95        8/2/96

If any of the files do not have appropriate dates for your operating system and system upgrades, you may have damaged files or an incompatibility because of mismatched DLL files.

Follow these steps to replace your OLE32 files:

1. Restore the DLLs from the Sysbckup folder (Windows 95 only).

   Some of the OLE32 files can be restored from the Sysbckup folder. This must be done in MS-DOS mode because Windows may be using some of the files for other operations.

   NOTE: The system backup (Sysbckup) folder is located in the folder in which you installed Windows 95. (Windows NT does not have a Sysbckup folder.)

       a. Click Start, and then click Shut Down. This opens the Shut Down
          Windows dialog box.
   

       b. On the Shut Down Windows dialog box, click "Restart the computer in
          MS-DOS mode?" to restart your computer in MS-DOS mode.
   

       c. Switch to the Windows\Sysbckup folder and type the following
          command:
   

             COPY *.DLL C:\WINDOWS\SYSTEM\*.DLL
   
          This copies the DLL file in the Windows\Sysbckup folder to the
          Windows\System folder. This may contain the mismatched DLLs that are
          causing the problem.
   
       d. After you copy the files, restart your computer, and let Windows 95
          start normally.
   
       e. Test to see if Clip Gallery starts within WordPad.
   
          Start WordPad from the Start menu and start Microsoft Clip
          Gallery from the Insert menu.
   
          If Clip Gallery does not start, then the replacement files did
          not fix the problem. You must rename the DLL files and either
          manually extract the files from your original installation source
          or reinstall Windows 95.
   
   

2. Extract the OLE32 DLL files from your Windows compact disc.

   WARNING: The following procedure involves manually replacing DLLs. If you are not experienced with manual extraction procedures or have an OEM installation of Windows 95, you may want to simply reinstall Windows 95. Incorrectly replacing OLE modules can result in more problems than it resolves. If you are unsure of the following steps, please contact Windows 95 Technical Support or the OEM Manufacturer that pre-installed your operating system.

   Extract the files into the Windows\System folder, replacing every file in the OLE32 file table.

   For additional information about extracting files from the Windows 95 .cab files, please see the following articles in the Microsoft Knowledge Base:

         ARTICLE-ID: Q132913
         TITLE     : How to Use EXTRACT.EXE to Copy Files from DMF Disks
   
         ARTICLE-ID: Q135540
         TITLE     : Windows 95 CD-ROM Directory Listing (1 of 5)
   
         ARTICLE-ID: Q135537
         TITLE     : Windows 95 CD-ROM Directory Listing (2 of 5)
   
         ARTICLE-ID: Q135538
         TITLE     : Windows 95 CD-ROM Directory Listing (3 of 5)
   
         ARTICLE-ID: Q135539
         TITLE     : Windows 95 CD-ROM Directory Listing (4 of 5)
   
         ARTICLE-ID: Q135541
         TITLE     : Windows 95 CD-ROM Directory Listing (5 of 5)
   
         ARTICLE-ID: Q135542
         TITLE     : Windows 95 DMF Floppy Disk Directory Listing (1 of 4)
   
         ARTICLE-ID: Q135545
         TITLE     : Windows 95 DMF Floppy Disk Directory Listing (2 of 4)
   
         ARTICLE-ID: Q135544
         TITLE     : Windows 95 DMF Floppy Disk Directory Listing (3 of 4)
   
         ARTICLE-ID: Q135543
         TITLE     : Windows 95 DMF Floppy Disk Directory Listing (4 of 4)
   
       a. After you copy the files, restart your computer, and let Windows
          95 start normally.
   
       b. Click Start, point to Programs, point to Accessories, and then
          click WordPad.
   
       c. On the Insert menu, click Object.
   
       d. In the Object Type list, click Microsoft Clip Gallery, and then
          click OK.