Draw: Error in Help Section on Filled and Unfilled Objects

Last reviewed: September 9, 1996
Article ID: Q79699

The information in this article applies to:

Microsoft Draw version 1.0

SUMMARY

In online help for Microsoft Draw version 1.0, the second set of drawings in the section for drawing filled and unfilled objects, is incorrect. To access this screen, choose Index from the Help menu, press the Search button, type fill, press the Show Topics button, select "Drawing filled and unfilled objects," and choose the Go To button. The second set of drawings should depict unframed but filled objects; however, the freeform drawing examples appear framed and unfilled.

Microsoft has confirmed this to be a problem in Microsoft Draw version 1.0. We are researching this problem and will post new information here as it becomes available.

KBCategory: kbtool kbdocerr
KBSubcategory:
Additional reference words: msdraw docerr 1.00

THE INFORMATION PROVIDED IN THE MICROSOFT KNOWLEDGE BASE IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND. MICROSOFT DISCLAIMS ALL WARRANTIES, EITHER EXPRESS OR IMPLIED, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL MICROSOFT CORPORATION OR ITS SUPPLIERS BE LIABLE FOR ANY DAMAGES WHATSOEVER INCLUDING DIRECT, INDIRECT, INCIDENTAL, CONSEQUENTIAL, LOSS OF BUSINESS PROFITS OR SPECIAL DAMAGES, EVEN IF MICROSOFT CORPORATION OR ITS SUPPLIERS HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF LIABILITY FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES SO THE FOREGOING LIMITATION MAY NOT APPLY.

Last reviewed: September 9, 1996
© 1998 Microsoft Corporation. All rights reserved. Terms of Use.