3COM: Access Component Is Installed by Gateway DiskLast reviewed: October 20, 1997Article ID: Q103804 |
1.00
MS-DOS
kb3rdparty
The information in this article applies to:
SYMPTOMSVersion 1.0 of the Microsoft Mail Gateway to 3Com 3+Mail requires an access component similar to that of all Microsoft Mail gateways, but it does not require you to install any software from the Gateway Access for 3Com 3+Mail disk.
CAUSEAll the necessary access components for the gateway postoffice are installed when you install the gateway executable files. The required components are installed by the Install program (INSTALL.EXE) on the Gateway to 3Com 3+Mail disk.
MORE INFORMATIONUsually, installing the access components of a gateway requires an additional installation process that is performed after you install the gateway component. On a downstream postoffice, only the access component is installed. On the 3Com 3+Mail gateway, the Gateway Access for 3Com 3+Mail disk is used only for a downstream postoffice (not the gateway postoffice, but another postoffice that has direct access to the gateway postoffice). WARNING: NEVER install the disk with the gateway access component onto the 3Com gateway postoffice. This corrupts the database and causes you to receive messages referring to circular routes being detected. If you accidentally install the gateway access component, perform these steps:
|
Additional reference words: 1.00
© 1998 Microsoft Corporation. All rights reserved. Terms of Use. |