X400: Update Utility Crashes with "Out of memory" MessageLast reviewed: October 20, 1997Article ID: Q115355 |
3.20
MS-DOS
kbusage kbbug3.20
The information in this article applies to:
SYMPTOMSThe Update utility crashes with these messages:
Out of memory in line 0 of module ADVADDR at address 46A4:0cDD Press any key to return to systemRecords following the one that caused the error also are lost.
CAUSEThis problem was traced to invalid X.400 address fields. It was also found to occur when entries contain MSMail information but omit X.400 information, in which case the Update utility issues a message but does not crash. When this bug exhausts available memory, the Config utility drops the invalid fields (as it should) and all records following the one with the null X.400 address field are lost.
RESOLUTIONCode was added to alert you of this condition. If a message contains a null X.400 string, this message now is displayed:
No X.400: in advanced address mapping stringalong with an OK button. If you click on OK, the utility terminates cleanly. Fill in the X.400 field in the message.
STATUSResolved.
STEPS TO REPRODUCE BEHAVIOR
is--the invalid fields are not displayed.5. Select "Update" to update the record. This should drop the invalid fields.6. Select "OK" to exit the menu. The utility crashes with these messages:
Out of memory in line 0 of module ADVADDR at address 46A4:0cDD Press any key to return to systemNote: Skipping steps 4 and 5 above produces the same behavior. You can also trigger this failure mode by entering the MSMail information but leaving the X.400 information blank.
|
Additional reference words: 3.20
© 1998 Microsoft Corporation. All rights reserved. Terms of Use. |