X400: Sample TP4 Configuration Files

The information in this article applies to:

• Microsoft Mail Gateway to X.400, version 3.2

SUMMARY

The following are examples of the AUTOEXEC.BAT, CONFIG.SYS, and PROTOCOL.INI files for an X.400 gateway using TP4 as the transport stack. It is assumed that the gateway computer has a DEC DEPCA Ethernet card in it.

AUTOEXEC.BAT

Prompt $p$g Echo Off set path =c:\dos set tmp =c:\tmp

lh doskey lh mouse

@REM ==== LANMAN 2.2a ==== SET PATH=C:\LANMAN.DOS\NETPROG;%PATH% c:\tp4\drivers\tp4.exe NET START workstation full LOAD NETBEUI NET LOGON @REM ==== LANMAN 2.2a ====

CONFIG.SYS

device=c:\dos\himem.sys /testmem:off device=c:\dos\emm386.exe noems /x=D000-DFFF dos=high,umb files=30 shell=c:\dos\command.com c:\dos\ /p

LASTDRIVE=Z DEVICE=C:\LANMAN.DOS\DRIVERS\PROTMAN\PROTMAN.DOS /i:C:\LANMAN.DOS DEVICE=C:\LANMAN.DOS\DRIVERS\ETHERNET\DEPCA\DEPCA.DOS device=c:\tp4\drivers\dli.dos

PROTOCOL.INI

[PROTMAN]

  DRIVERNAME = PROTMAN$
  DYNAMIC = YES
  PRIORITY = NETBEUI

  DRIVERNAME = CLNS$
  NTC        = 6

  DRIVERNAME = PLUTO$
  BINDINGS   = "DEPCA_NIF"
  NBUF       = 4
  NTC        = 7

  Drivername = netbeui$
  SESSIONS = 6
  NCBS = 12
  BINDINGS = "DEPCA_NIF"
  LANABASE = 0

; PROTOCOL.INI section for the DEC EtherWORKS (MC, LC, Turbo, & DEPCA) ; Adapters

    DriverName   = DEPCA$
    MaxMulticast = 12
    MaxTransmits = 32
    AdapterName  = DE200
    RamAddress   = 0xD000
    Interrupt    = 5