PROFS: VMGATE.EXE Version 3.40.0042 Update

Last reviewed: March 9, 1998
Article ID: Q131957
3.40a MS-DOS kb3rdparty kbfile

The information in this article applies to:

  • Microsoft Mail Gateway to IBM PROFS and OfficeVision, version 3.4a

SUMMARY

Microsoft provides a replacement for the VMGATE.EXE file that is included with version 3.4a of Microsoft Mail Gateway to IBM PROFS and OfficeVision.

For complete information about obtaining and installing the VMGATE.EXE file, see the following sections below:

  • To download the updated files
  • To update your VMGATE.EXE file

MORE INFORMATION

This update corrects the following problem:

  • The following errors occur in the VMGATE log:

    [15:24] - ERROR: scanning data fields in: L:MAI\MAC\0001594C.MAI

       [15:24] -         ...will try again at NEXT time, processing continues
    
       [15:26] - ERROR: scanning data fields in: L:MAI\MAC\0001594C.MAI
       [15:26] -         ...will try again at NEXT time, processing continues
    
       [15:28] - ERROR: scanning data fields in: L:MAI\MAC\0001594C.MAI
       [15:28] -         ...SYSTEM.LOG entry written, diagnostic sent to:
    
       After the .MAI file fails for the third time, the mail is returned to
       the sender and the following message is logged in the system log:
    
          System log entry on: 12-15-94 15:28
          VMGATE program has detected a mail problem
          Message data:
            From: IES/TOWER/SZHJZG
            Date: 12-15-94
            Time: 15:29
            Subject: MMIS year end processing issues
          Mail retry count exceeded sending to: VMGATE
    
    

To download the updated files

You can find VMGA.EXE (size: 538736 bytes) 
                     , a self-extracting file, on the following
services:
  • Microsoft's World Wide Web Site on the Internet

          On the www.microsoft.com home page, click the Support icon.
          Click Knowledge Base, and select the product.
    
          Enter kbfile VMGA.EXE (size: 538736 bytes) 
                               , and click GO!
          Open the article, and click the button to download the file.
    
    
  • Internet (anonymous FTP)

          ftp ftp.microsoft.com
          Change to the Softlib/Mslfiles folder.
          Get VMGA.EXE (size: 538736 bytes) 
    
  • The Microsoft Network

          On the Edit menu, click Go To, and then click Other Location.
          Type "mssupport" (without the quotation marks).
          Double-click the MS Software Library icon.
          Find the appropriate product area.
          Locate and Download VMGA.EXE.
    
  • Microsoft Download Service (MSDL)

          Dial (206) 936-6735 to connect to MSDL
          Download VMGA.EXE (size: 538736 bytes) 
    

For additional information about downloading, please see the following article in the Microsoft Knowledge Base:

   ARTICLE-ID: Q119591
   TITLE     : How to Obtain Microsoft Support Files from Online
               Services

After you download VMGA.EXE to a clean directory, run it (by typing "vmga" at the MS-DOS prompt) to extract the contents of the file. You should receive the following files:

   NOVELL.EXE   (284,338 bytes, dated 03-07-95, 4:45 P.M.)
   DCA_CUT.EXE  (289,218 bytes, dated 03-07-95, 4:44 P.M.)
   DCA_DFT.EXE  (306,690 bytes, dated 03-07-95, 4:43 P.M.)
   IBM_HIGH.EXE (290,114 bytes, dated 03-07-95, 4:42 P.M.)
   README.TXT

To update your VMGATE.EXE file

Decide which executable file matches your configuration:

   Executable file   3270 emulation card supported
   ---------------------------------------------------------------------
   NOVELL.EXE        Novell NetWare 3270
   DCA_CUT.EXE       DCA CUT-mode
   DCA_DFT.EXE       DCA Non-CUT (DFT) mode
   IBM_HIGH.EXE      IBM High Level

At the MS-DOS command prompt, type the following and press ENTER

   copy <path>:\VMGA.exe <destination>\vmgate.exe

where <path> is the drive and directory where you ran the self-extracting VMGA.EXE file, <destination> is the drive and directory where your VMGATE.EXE file currently resides, and VMGA is the corresponding executable file for your software vendor. For example, if you ran the self- extracting file from the TEST directory on drive D, your VMGATE.EXE file is located in the MAILEXE directory on drive C, and you are using IBM High Level, type the following command and press ENTER:

   copy d:\test\IBM_HIGH.EXE c:\mailexe\vmgate.exe


Additional reference words: 3.40a
KBCategory: kb3rdparty kbfile
KBSubcategory: MailGWPROFS
Keywords : MailGWPROFS kb3rdparty kbfile
Version : 3.40a
Platform : MS-DOS


THE INFORMATION PROVIDED IN THE MICROSOFT KNOWLEDGE BASE IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND. MICROSOFT DISCLAIMS ALL WARRANTIES, EITHER EXPRESS OR IMPLIED, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL MICROSOFT CORPORATION OR ITS SUPPLIERS BE LIABLE FOR ANY DAMAGES WHATSOEVER INCLUDING DIRECT, INDIRECT, INCIDENTAL, CONSEQUENTIAL, LOSS OF BUSINESS PROFITS OR SPECIAL DAMAGES, EVEN IF MICROSOFT CORPORATION OR ITS SUPPLIERS HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF LIABILITY FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES SO THE FOREGOING LIMITATION MAY NOT APPLY.

Last reviewed: March 9, 1998
© 1998 Microsoft Corporation. All rights reserved. Terms of Use.