The information in this article applies to:
- Microsoft SNA Server for Windows NT, versions 2.11 and 3.0
SUMMARY
This article describes setting up Client Access 400 (CA400) with the SNA
Server 2.11 or 3.0 Windows 3.x Client.
MORE INFORMATION
To install CA400, follow these steps:
- Install the SNA Server Windows 3.x client software by running the Setup
program located in the \clients\win3x directory on the SNA Server 2.11
or 3.0 CD-ROM.
- Using Notepad or another text editor, edit the [WNAP] section of the
WIN.INI file so that the following values are modified as shown:
CA400=YES
CA400SharedFolders=YES
- In the [SNAServerEHNAPPC] section, add the following entry:
LocalLU=<localLU>
The Local APPC LU alias can be found in SNA Server Admin. configured off
the SNA Server service. This Local LU must be partnered with a Remote
APPC LU associated with your AS/400 that is running OS/400 V3R1 or
later.
The <localLU> parameter needs to be in all capital letters or several
errors may occur.
- Install the IBM Client Access/400 shared folders feature from the
installation disks by running the INSTALL.EXE program.
- After CA400 is installed, a dialog box appears telling you to restart
Windows. Do NOT click OK! Instead, go to the \CAWIN directory and rename
the following files:
rename EHNAPPC.DLL EHNAPPC.IBM
rename EHNRTRW.DLL EHNRTRW.IBM
- Return to the CA/400 dialog box and choose OK to allow CA/400 to restart
Windows.
- After restarting Windows, CA400's setup will continue. In the dialog box
that appears, select the "Connect Type" as None. Choose OK. If installing
v3.r1.m1 of CA/400, select "Other Router". You will then be prompted for a
server name. Specify the Remote LU Name you assigned in SNA Server
configuration.
- After selecting OK, CA400 Setup will inform you that you need to restart
Windows again because the configuration has changed. Do it.
- After restarting, go into the CA400 folder and run the SETUP icon. You
should see the SNA Server Windows 3.x client icon (WNAP.EXE) start up
automatically. At this point, CA400 will attempt to log you into ANY
AS400's you have configured thru SNA Server Admin. If the dialog box
that comes up is pointing to an AS400 that is NOT running OSV3R1 (or
better), press cancel. Do this until the dialog presents an AS400 that
is running OSV3R1. At this point, enter the common user ID/Password for
that system.
- With Client Access Setup open on your screen, select the icon for the
Rumba/400 install. When you select this option, CA400 will install
Rumba/400 from the AS400 to your client.
The following information is for reference purposes only. It shows the
changes that may be made to system files. This may vary depending on what
options you have chosen on your client.
PCS.INI
[PCS/400]
INITCFG=NO
GROUP=INS
RUMBA=INS
[Shared Folders]
SFLR01=1,I
[UPDT]
UPDT01=I:\QPWXCWN,C:\CAWIN,S,,,Client Access/400
UPDT02=I:\QPWXCRB\,C:\RUMBACAW,S,,,RUMBA/400
[NETWORK]
I:=0
[ADVANCED]
ExtraFunction=No
NSD.INI
[Configuration]
LANGUAGE=2924
DIRECTORY=C:\CAWIN
COMMONUSERID=
LOCALLUNAME=
DLCTYPE=NonNSWin
RTDN=
[MODES]
QPCSUPP=*, 2, 32, 16
QSERVER=*, 2, 32, 16
SNASVCMG=256, 1, 2, 1
BLANK=,2, 8, 4
#BATCH=256, 3, 8, 4
#INTER=, 7, 8, 4
WIN.INI
[SnaServerEHNAPPC]
LocalLu=DONALD
DILBERT=SNA
[Wnap]
WBinPath=C:\SNA.WIN
Remote=DISNEYWORLD
LocalFlag=LOCAL
NosType=LANMAN
NosSetup=WFW
NetSetup=NO
CA400=YES
CA400SharedFolders=YES
[CAWIN]
EHNP=C:\CAWIN
EHNL=2924
[CAMAPI]
HLL=C:\RUMBACAW\EEHLLAPI.DLL
SYSTEM.INI
[386Enh]
device=C:\CAWIN\VREFLECT.386
device=C:\CAWIN\VNSWUTIL.386
device=C:\CAWIN\VNCD.386
AUTOEXEC.BAT
Autoexec.bat
C:\DOS\SMARTDRV.EXE /L /X 2048 128
LH /L:1,40688 C:\DOS\MSCDEX.EXE /S /d:aspicd0 /m:12
@ECHO OFF
PROMPT $P$G
path c:\wfw311;c:\dos;C:\SNA.WIN;C:\RUMBACAW;c:\CAWIN;
SET TEMP=C:\TEMP
C:\WFW311\net start