LU Session Activation Using Dynamically Defined Dependent LUs

• Microsoft SNA Server version 2.0, 2.1, 2.11 and 3.0

SUMMARY

SNA Server 2.11 and later versions support the VTAM V4 feature referred to as "Dynamically Defined Dependent LUs" (DDDLU). The host support of DDDLU is indicated in the ACTPU sent to SNA Server. Upon receiving a request for a 3270 session, SNA Server will request that the host activate a LU for this session. The Host PU definition defines support for DDDLU by the use of the LUGROUP and LUSEED parameters, there will be no LUs defined in the PU definition. The SNA Server configuration, though, must have the LUs defined, although they will be displayed as inactive until a client requests a session.

NOTE: For information about DDDLU support in VTAM, please refer to the

      following reference:

         VTAM Network Implementation Guide, V4R1 for MVS/ESA, IBM document
         number SC31-6419-00

      For information about the format of these messages, please refer to 
      the following document:

         IBM SNA Formats Guide, IBM document number GA27-3136-14

MORE INFORMATION

The Host indicates support of DDDLU in the PU Capabilities (x'80') ACTPU Control Vector by setting the first bit of the third byte of to 1.

   DLC    ---------------------------------------------- 15:57:44.82
   DLC    04160000->01020201 DLC DATA
   DLC                       DAF:00 OAF:00 ODAI:off Exp.
   DLC                       ACTPU  RQD SC  FI BC EC DR1
   DLC
   DLC    ---- Header  at address 012D4828, 1 elements ----
   DLC    00434F4D 4E4F2D00 000000FA 0100F200     <.COMNO-.......2.>
   DLC
   DLC    ---- Element at address 017CE59C, start 10, end 24 ----
   DLC    6B800011 12010500 00000001 800180       <k.............. >
                                                                ^^^^^^ PU

   Byte 0   Vector Key = x'80'
   Byte 1   Vector length
   Byte 2   bit 0 Unsolicited NMVT support:
        0 Sending node does not support unsolicited NMVTs for PSID.
        1 Sending node does support unsolicited NMVTs for PSID.
   Bit  1-7  Reserved

   DLC    01020201->04160000 DLC DATA
   DLC                       DAF:00 OAF:00 ODAI:off Normal
   DLC                       NMVT   RQD FMD FI BC EC DR1
   DLC
   DLC    ---- Header  at address 012D4758, 1 elements ----
   DLC    0102000C 10112C00 00000000 0100DE00     <......,.........>
   DLC
   DLC    ---- Element at address 017CE59C, start 10, end 83 ----
   DLC    0B800041 038D0000 00001000 3F00900A     <...A........?...>
   DLC    04010000 00000000 070D8205 10F0F0F0     <..........b..000>
   DLC    03200103 30021910 00161109 130012F0     <. ..0..........0>
   DLC    F0F0F0F0 F0F2F0F0 F0F0F0F0 F0F0F00B     <000002000000000.>
   DLC    01091060 0C0A1000 1928                  <...`.....(      >

   0B8000   RH
   41038D   Header
   0000  Retired
   0000  PRID
   10 0    unsolicited NMVT
      00   only NMVT for this PRID
      1    MS major vector contains SNA address list
      0000 resrv
   ========MS Major vector=======
   003F  length
   0090  Reply Product set ID <<<
   ______________________________
      0A           length
      04           SNA Address List <<<
      0100000000000007  local address= LU# we want an ACTLU for
   ______________________________
      0D length
      82 Port-Attached Device Config Description <<<
         ------------------------------
         05 length
         10 Port Number <<<
         F0F0F0   number of the port
         ------------------------------
         03 length
         20 Power On Status <<<
         01 device is currently powered on
         ------------------------------
         03 length
         30 Power-on Since Last Solicitation <<<
         02 device was not powered on
   ______________________________
      19 length
      10 Product Set ID <<<
      00 retired
         ------------------------------
         16 length
         11 Product ID <<<
         09 0000 resv
            1001 non-ibm hardware
            ------------------------------
            13 length
            00 Hardware Product ID <<<
            12 product instance is identified by serial number
            F0F0F0F0 machine type
            F0F0F2      machine model number
            F0F0     plant of manufacture
            F0F0F0F0F0F0F0 sequence number
            ------------------------------
            0B    length
            01    Emulator Product ID <<<
            0910600C machine type of product being emulated
            0A10001928  Model number product being emulated

For more details on NMVT requests & Major vectors, please refer to the IBM SNA Formats Guide. The documentation of the PU Capabilities Control Vector was added to the Fifteenth Edition of the SNA Formats Guide (GA27-3136-14).