Interpreting an FMH-5 Attach for Independent LU 6.2Last reviewed: November 6, 1997Article ID: Q169575 |
The information in this article applies to:
SUMMARYAn FMH-5 Attach is used to carry a request for conversation to be established between two transaction programs. The following is an example Attach message in a PVI (Peer Verb Interface) trace. This is the first SNA message that flows to the remote system for conversation startup:
PVI ---------------------------------------------- 12:05:05.65 PVI 751F0001->0302E453 LU 6.2 PVI MSGID:SWAT MSGTYP:PRFLS Sense1:0004 PVI Sense2:0000 PVI PVI ---- Header at address 8297B0F8, 1 elements ---- PVI 0B050004 00000800 E1000000 0100C500 <..............E.> PVI PVI ---- Element at address 829935BC, start 13, end 237 ---- PVI 430502FF 1803D000 400430F0 F0F50F04 <C.......@.0005..> PVI 02C1D4C9 09017B30 09E53983 81E71A11 <.AMI..{0.V9caX..> PVI C2C9D6D5 C5E3C6D9 4BE2D5C1 C4E5F0F2 <BIONETFRKSNADV02> PVI F124280E 0D1E0500 01000800 00000000 <1$(.............> PVI 0002FF00 9E12F500 9A12E200 9612A020 <......5...S.o.. > PVI 00051001 00000023 D7C3F2F3 F9F9E2F1 <.......#PC2399S1> PVI 4040F3F1 F7F9F0F0 F0F24040 40404080 <@@31790002@@@@@.> PVI 00000000 00000000 00000026 C4C6C1C2 <...........&DFAB> PVI 40F6F9F7 40F2F9F7 40404040 40404040 <@697@297@@@@@@@@> PVI 40404040 40404040 4040C140 00000000 <@@@@@@@@@@A@....> PVI 00000000 00000000 00000000 00000000 <................> PVI 00000000 00000000 00000000 00000000 <................> PVI 00000000 00000000 00000000 00000000 <................> PVI 00000000 00000000 00000000 00000000 <................> PVI 00 <. >The following is the above FMH-5 Attach broken out using the IBM SNA Format Guide:
43 - Length 05 - FMH type 02FF - Command code: ATTACH 18 - Security indicators: Password substitute present, PIP data present 03 - Length of fixed length parameters (always 3) D00040 - Half duplex basic conversation, confirm sync level Transaction Program Name field: 04 - Length 30F0F0F5 - TP Name Access Security Information field: 0F - Length 0402C1D4C9 - User ID field "AMI" 09017B3009E5398381E7 - Password field Logical-Unit-of-Work Identifier Field: 1A11 C2C9D6D5 C5E3C6D9 4BE2D5C1 C4E5F0F2 F124 280E0D1E 050001Conversation Correlator Field: 00 - length field 0800 00000000 0002FF - Attach sequence numberPip Data (Pip data format can be found in IBM's "AS/400 5250 Display Station Pass-Through: Interface Specification" document. There is no order number for this manual. Byte 18 determines whether Pip Data is present.):
009E12F5 - GDS header for PIP data 009A12E2 - GDS Header for PIP subfield 009612A0 - GDS Header for pass-through data 2000 - Pass through operation flags (start-up record - no diagnostics included) Start-up record: 0510 - Reported System ID - ??? (AS/400 is 0560) 0100 - Reported Release Level 0000 - Fixed portion flags field Source Device information: 23 length field D7C3F2F3 F9F9E2F1 4040 <Reserved>#PC2399S1 F3F1 F7F9 Source device type "3179" F0F0 F0F2 Source device model "0002" 4040 4040 Keyboard type 408000000000 00000000 0000 Reserved Dynamic configuration data: 0026 C4 C6C1C240 Subfield flags F6F9F7 Keyboard ID 40F2F9F740 Reserved 40404040 Char set / code page 4040404040404040 WSC type /model 4040404040C14000 Actual device type / model |
Additional query words:
© 1998 Microsoft Corporation. All rights reserved. Terms of Use. |