WD98: How to Control the Tabbing Order in a FormLast reviewed: March 13, 1998Article ID: Q182425 |
The information in this article applies to:
SUMMARYBy default, when you fill in an online form, Word positions the insertion point in the first form field and moves from one field to the next in a left-to-right, top-to-bottom order when you press TAB. To change the default tabbing order, use the procedure described in the "More Information" section of this article.
MORE INFORMATIONMicrosoft provides programming examples for illustration only, without warranty either expressed or implied, including, but not limited to, the implied warranties of merchantability and/or fitness for a particular purpose. This article assumes that you are familiar with the programming language being demonstrated and the tools used to create and debug procedures. Microsoft support engineers can help explain the functionality of a particular procedure, but they will not modify these examples to provide added functionality or construct procedures to meet your specific needs. If you have limited programming experience, you may want to contact the Microsoft fee-based consulting line at (800) 936-5200. For more information about the support options available from Microsoft, please see the following page on the World Wide Web:
http://www.microsoft.com/support/supportnet/refguide/default.aspYou can use one of the following methods as a workaround.
Method 1: Create a single exit macro for all Form fieldsCreate a macro similar to the following example. For each form field, specify this macro as the exit macro for Form field in your document. In the Select Case statement, list each Form field for which you want to change the tabbing order. NOTE: Each Case statement below should be in all lower case.
Sub TabOrder() Dim sTabTo As String Dim dlgForm As Dialog Set dlgForm = Dialogs(wdDialogFormFieldOptions) Select Case LCase(dlgForm.Name) Case "cc" sTabTo = "header" Case "header" sTabTo = "to" Case "to" sTabTo = "from" Case "from" sTabTo = "memo" Case "memo" sTabTo = "subject" Case "subject" sTabTo = "cc" Case Else End Select ActiveDocument.Bookmarks(sTabTo).Select End Sub Method 2: Create a separate macro for each form fieldEach macro contains a Selection.GoTo statement that moves the insertion point to the desired Form field. TIP: To easily identify each macro, give the macro a name that describes its functionality. For example, use the name "GoToSubject" (without the quotation marks) for the Exit macro that moves the insertion point to the Subject Form field. The following sample exit macro, named "GoToSubject," moves from the current Form field to the Subject Form field:
Sub GoToSubject() Selection.GoTo What:=wdGoToBookmark, Name:="Subject" End SubFor information about how to do this in earlier versions of Word, please see the following article in the Microsoft Knowledge Base:
ARTICLE-ID: Q120447 TITLE : WD: How to Control the Tabbing Order in a FormFor additional information, please see the following article in the Microsoft Knowledge Base:
ARTICLE-ID: Q181058 TITLE : OFF98: How to Run Sample Code from Knowledge Base Articles REFERENCESFor more information about getting help with Visual Basic for Applications, please see the following article in the Microsoft Knowledge Base:
ARTICLE-ID: Q163435 TITLE : VBA: Programming Resources for Visual Basic for Applications |
Additional query words: vb vba vbe tabs tabbed
© 1998 Microsoft Corporation. All rights reserved. Terms of Use. |