Using Int 21h Get/Set Media ID in the Windows Environment

The information in this article applies to:

• Microsoft Windows Software Development Kit (SDK) for Windows versions 3.0 and 3.1

SUMMARY

The Interrupt 21h Generic IOCTL for Block Devices functions Get Media ID and Set Media ID cannot be used directly from a protected mode application in the Windows operating environment. However, these functions can be used in conjunction with the DPMI function Simulate Real Mode Interrupt.

MORE INFORMATION

The following Interrupt 21h AX=440Dh Generic IOCTL for Block Devices functions are automatically translated from protected mode by the DOSMGR VxD:

   40h - Set Device Parameters
   41h - Write Track on Logical Drive
   42h - Format Track on Logical Drive
   60h - Get Device Parameters
   61h - Read Track on Logical Drive
   62h - Verify Track on Logical Drive
   68h - Sense Media Type

   46h - Set Media ID
   66h - Get Media ID

The sample code below illustrates how the Get Media ID function can be manually translated by:

1. Allocating a real mode addressable buffer using GlobalDosAlloc().

2. Initializing a DPMI real mode register structure with a real mode pointer to the buffer.

3. Issuing the interrupt in real mode using the DPMI function Simulate Real Mode Interrupt.

4. If successful, the content of the real mode addressable buffer is copied to the protected mode destination buffer.

5. The real mode addressable buffer is freed.

Sample Code

// This is a standard MS-DOS structure.

    WORD  wInfoLevel;
    DWORD dwSerialNum;     // Serial number
    char  VolLabel[11];    // ASCII volume label
    char  FileSysType[8];  // File system type

// This is a standard DPMI structure.

    DWORD rmEDI, rmESI, rmEBP, Reserved, rmEBX, rmEDX, rmECX, rmEAX;
    WORD  rmCPUFlags, rmES, rmDS, rmFS, rmGS, rmIP, rmCS, rmSP, rmSS;

//********************************************************************
// RealInt()
//
// Simulate an interrupt in real mode using DPMI function 0300h
// When the interrupt is simulated in real mode, the registers will
// contain the values in lpRealModeReg. When the interrupt returns,
// lpRealModeReg will contain the values from real mode.
//
//********************************************************************

   BOOL bRetVal = TRUE;

   _asm
   {
       mov  ax, 0300h  // Simulate real mode interrupt
       mov  bl, intnum // Interrupt number to simulate
       mov  bh, 0      // Flags
       mov  cx, 0      // Number of words to copy on stack
       les  di, lpRealModeReg
       int  31h
       jnc  Done
       mov  bRetVal, FALSE
   Done:
   }
   return bRetVal;

//********************************************************************
// GetMediaID()
//
// Get Media ID by simulating an Interrupt 21h, AX=440Dh, CX=0866h in
// real mode. Set up RealModeReg to contain a real mode pointer to a
// MediaID structure.
//********************************************************************

BOOL GetMediaID (WORD      Drive,
                 LPMEDIAID lpMediaID)
{
   REALMODEREG RealModeReg;
   DWORD       dwGlobalDosBuffer;
   LPMEDIAID   lpRMMediaID;
   BOOL        bRetVal;

   // (1) Get a real mode addressable buffer for the MediaID structure.
   //
   dwGlobalDosBuffer = GlobalDosAlloc(sizeof(MEDIAID));
   if (dwGlobalDosBuffer == NULL)
   {
       return FALSE;
   }

   // (2) Initialize the real mode register structure.
   //
   memset(&RealModeReg, 0, sizeof(RealModeReg));
   (WORD)RealModeReg.rmEAX = 0x440D;  // IOCTL for Block Device
   (WORD)RealModeReg.rmEBX = Drive;   // 0 = default, 1 = A, 2 = B
   (WORD)RealModeReg.rmECX = 0x0866;  // Get Media ID
   // Set the real mode DS:DX to a real mode pointer to the buffer.
   // The offset in DX is zero from the memset().
   RealModeReg.rmDS  = HIWORD(dwGlobalDosBuffer);

   // (3) Simulate the real mode interrupt.
   //
   if (RealInt(0x21, &RealModeReg) &&         // Int simulation ok?
       (RealModeReg.rmCPUFlags & 0x0001)==0)  // Carry clear?
   {
       // (4) Copy the content of the real mode addressable buffer
       //     to the protected mode destination buffer.
       //
       lpRMMediaID = (LPMEDIAID) MAKELP(LOWORD(dwGlobalDosBuffer), 0);
       *lpMediaID = *lpRMMediaID;  // Structure copy
       bRetVal = TRUE;
   }
   else
   {
       bRetVal = FALSE;
   }

   // (5) Free the real mode addressable buffer.
   //
   GlobalDosFree(LOWORD(dwGlobalDosBuffer));

   return bRetVal;

For more information on the DOS Protected Mode Interface (DPMI), see the DPMI version 0.9 specification, which is available on the Microsoft Developer Network CD Disk Four.