Connecting a Tablet to COM2

Last reviewed: January 5, 1995
Article ID: Q74387

The information in this article applies to:

Microsoft Windows for Pen Computing version 1.0

The tablet drivers supplied by Microsoft as part of the release of Windows for Pen Computing will work correctly if the tablet is connected to COM2. Connecting the tablet in this manner keeps COM1 free for the debugging information that is displayed by CodeView for Windows or WDEB386.

To instruct the tablet driver to install on COM2, it is necessary to modify the [Pen Driver] section of the SYSTEM.INI file to include the following line:

   com2=1

The next time the system loads, it will use COM2 for the tablet.

Additional reference words: 1.00
KBCategory: kbsetup kbprg
KBSubcategory: WpenSetup

THE INFORMATION PROVIDED IN THE MICROSOFT KNOWLEDGE BASE IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND. MICROSOFT DISCLAIMS ALL WARRANTIES, EITHER EXPRESS OR IMPLIED, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL MICROSOFT CORPORATION OR ITS SUPPLIERS BE LIABLE FOR ANY DAMAGES WHATSOEVER INCLUDING DIRECT, INDIRECT, INCIDENTAL, CONSEQUENTIAL, LOSS OF BUSINESS PROFITS OR SPECIAL DAMAGES, EVEN IF MICROSOFT CORPORATION OR ITS SUPPLIERS HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF LIABILITY FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES SO THE FOREGOING LIMITATION MAY NOT APPLY.

Last reviewed: January 5, 1995
© 1998 Microsoft Corporation. All rights reserved. Terms of Use.