PRB: OSR2 Device Installation Defaults to Wrong Source Location

Last reviewed: June 5, 1997
Article ID: Q169587

The information in this article applies to:

Windows 95 Device Driver Kit (DDK), version 4.0

SYMPTOMS

When installing a device using Windows 95 OSR2, the installer may default to the wrong source location. Typically, the installer source path defaults to the Windows installation location.

CAUSE

This is a known problem with the Windows 95 OSR2 device installer.

RESOLUTION

The user can manually redirect the installer to the correct source location.

Keywords : kbprb
Version : 4.0
Platform : WINDOWS

THE INFORMATION PROVIDED IN THE MICROSOFT KNOWLEDGE BASE IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND. MICROSOFT DISCLAIMS ALL WARRANTIES, EITHER EXPRESS OR IMPLIED, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL MICROSOFT CORPORATION OR ITS SUPPLIERS BE LIABLE FOR ANY DAMAGES WHATSOEVER INCLUDING DIRECT, INDIRECT, INCIDENTAL, CONSEQUENTIAL, LOSS OF BUSINESS PROFITS OR SPECIAL DAMAGES, EVEN IF MICROSOFT CORPORATION OR ITS SUPPLIERS HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF LIABILITY FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES SO THE FOREGOING LIMITATION MAY NOT APPLY.

Last reviewed: June 5, 1997
© 1998 Microsoft Corporation. All rights reserved. Terms of Use.