PRB: UniTool 3.08 - GPC v1 to v2 Sets RES_BO_OEMGRXFILTER Bit

Last reviewed: June 5, 1997
Article ID: Q169594

The information in this article applies to:

Windows 95 Device Driver Kit (DDK), version 4.0

SYMPTOMS

The conversion of a GPC file from version 1 to version 2 using UniTool 3.08 causes the RES_BO_OEMGRXFILTER bit to be set. This bit is in the fBLOCKOUT dialog under Printer Data/Graphics Info/Resolution.

RESOLUTION

If this bit should not be set for your printer minidriver, you will need to go in to the fBLOCKOUT dialog and clear the bit after the conversion.

Keywords : kbprb
Version : 4.0
Platform : WINDOWS

THE INFORMATION PROVIDED IN THE MICROSOFT KNOWLEDGE BASE IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND. MICROSOFT DISCLAIMS ALL WARRANTIES, EITHER EXPRESS OR IMPLIED, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL MICROSOFT CORPORATION OR ITS SUPPLIERS BE LIABLE FOR ANY DAMAGES WHATSOEVER INCLUDING DIRECT, INDIRECT, INCIDENTAL, CONSEQUENTIAL, LOSS OF BUSINESS PROFITS OR SPECIAL DAMAGES, EVEN IF MICROSOFT CORPORATION OR ITS SUPPLIERS HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF LIABILITY FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES SO THE FOREGOING LIMITATION MAY NOT APPLY.

Last reviewed: June 5, 1997
© 1998 Microsoft Corporation. All rights reserved. Terms of Use.