WFWG Err Msg: Your Network Adapter MS$AE1 Is Not Working...Last reviewed: November 21, 1994Article ID: Q108035 |
The information in this article applies to:
- Microsoft Windows for Workgroups version 3.11
SYMPTOMSIf an Artisoft AE/1 or AE/2 card network interface card (NIC) is configured for IRQ 10 or 15, it does not work with the NE1000.386 NDIS 3 NIC driver that ships with Microsoft Windows for Workgroups 3.11. In this situation, the following error message appears when you load Windows for Workgroups 3.11:
Your network adapter MS$AE1 is not working properly. You may need to set it up again. CAUSEThe NE1000.386 NDIS 3 NIC driver that ships with Windows for Workgroups 3.11 does not support extended IRQs. This is because the Novell NE1000 card, for which the driver was written, does not support extended IRQs. Therefore, NICs that emulate the NE1000 and support IRQ 10 or 15, such as the Artisoft AE/1 or AE/2 adapter, do not work with the Windows for Workgroups 3.11 NDIS 3 driver when set to these IRQs.
WORKAROUNDTo work around this problem, do one of the following:
|
KBCategory: kbnetwork kberrmsg kb3rdparty
© 1998 Microsoft Corporation. All rights reserved. Terms of Use. |