WG1002: SCHEDMSG.DLL Corrects French Headers

Last reviewed: May 1, 1997
Article ID: Q112024
3.11 WINDOWS kbfile kbappnote

The information in this article applies to:

  • Microsoft Windows for Workgroups version 3.11

Microsoft has an Application Note, " WG1002: Microsoft Mail 3.2 SCHEDMSG.DLL Corrects French Headers in Windows for Workgroups Mail.

When you reply to a reply from a Windows for Workgroups 3.11 Schedule+ meeting request, the header information may be converted to French. This Application Note includes a disk that corrects this problem.

You can obtain this Application Note from the following sources:

  • Microsoft's World Wide Web Site on the Internet
  • The Internet (Microsoft anonymous ftp server)
  • Microsoft Download Service (MSDL)
  • Microsoft FastTips Technical Library
  • Microsoft Product Support Services

For complete information, see the "To Obtain This Application Note" section at the end of this article.

THE TEXT OF WG1002

  Microsoft(R) Product Support Services Application Note (Text File)
    WG1002: MICROSOFT MAIL 3.2 SCHEDMSG.DLL CORRECTS FRENCH HEADERS
                  IN WINDOWS(TM) FOR WORKGROUPS MAIL
                                                   Revision Date: 2/94
                                                       1 Disk Included

The following information applies to Microsoft Windows for Workgroups, version 3.11.

| INFORMATION PROVIDED IN THIS DOCUMENT AND ANY SOFTWARE THAT MAY     |
| ACCOMPANY THIS DOCUMENT (collectively referred to as an Application |
| Note) IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER      |
| EXPRESSED OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED      |
| WARRANTIES OF MERCHANTABILITY AND/OR FITNESS FOR A PARTICULAR       |
| PURPOSE. The user assumes the entire risk as to the accuracy and    |
| the use of this Application Note. This Application Note may be      |
| copied and distributed subject to the following conditions:  1) All |
| text must be copied without modification and all pages must be      |
| included;  2) If software is included, all files on the disk(s)     |
| must be copied without modification (the MS-DOS(R)  utility         |
| diskcopy is appropriate for this purpose);  3) All components of    |
| this Application Note must be distributed together;  and  4) This   |
| Application Note may not be distributed for profit.                 |
|                                                                     |
| Copyright (C) 1994 Microsoft Corporation.  All Rights Reserved.     |
| Microsoft and MS-DOS are registered trademarks and Windows is a     |
| trademark of Microsoft Corporation.                                 |
|---------------------------------------------------------------------|

INTRODUCTION

When you reply to a reply from a Windows for Workgroups 3.11 Schedule+ meeting request, the header information may be converted to French. For example, the header appears as follows:

   ----------------
   De: <User B>
   A: <User A>
   Date d'envoi: <dddddddd, mmmmmmm dd, yyyy, hh:mmPM/AM>
   Objet: YES: <Subject text>

   Microsoft Mail v3.0 IPM.Microsoft Schedule.MtgRespP
   To: <User A>
   Date Sent: <yyyy-mm-dd, hh:mm>
   Période: <ddd, mmm dd, yyyy,  hh:mmPM/AM - hh:mmPM/AM>
   Subject: YES: <Subject text>

The WG1002 disk included with this Application Note contains the SCHEDMSG.DLL file from Microsoft Mail version 3.2. Using this file with Windows for Workgroups version 3.11 Mail and Schedule+ corrects the problem noted above.

To install the updated SCHEDMSG.DLL file

  1. Quit Windows for Workgroups.

  2. Make a backup copy of the currently installed SCHEDMSG.DLL file by typing the following at the MS-DOS command prompt and then pressing ENTER

          ren <drive>:<path>\schedmsg.dll schedmsg.old
    

    where <drive>:<path> is the location of your Windows SYSTEM subdirectory.

    For example, if your Windows directory is called WINDOWS and is on drive C, type the following at the MS-DOS command prompt and then press ENTER:

          ren c:\windows\system\schedmsg.dll schedmsg.old
    

  3. Insert the enclosed WG1002 disk in the appropriate floppy disk drive.

  4. To copy the file to the Windows SYSTEM subdirectory, type the following at the MS-DOS command prompt and then press ENTER

          copy <drive>:\schedmsg.dll <destination>
    

    where <drive> is the floppy disk drive containing the WG1002 disk and <destination> is the drive and directory of your Windows SYSTEM subdirectory.

    For example, if the WG1002 disk is in drive A and your Windows directory is called WINDOWS and is on drive C, type the following at the MS-DOS command prompt and then press ENTER:

          copy a:\schedmsg.dll c:\windows\system
    

STATUS

Microsoft has confirmed this to be a problem in Microsoft Windows for Workgroups version 3.11. We are researching this problem and will post new

information here in the Microsoft Knowledge Base as it becomes available.

TO OBTAIN THIS APPLICATION NOTE

You can find WG1002.EXE (size: 48972 bytes) 
                       , a self-extracting file, on the following
services:
  • Microsoft's World Wide Web Site on the Internet

          On the www.microsoft.com home page, click the Support icon.
          Click Knowledge Base, and select the product.
    
          Enter kbfile WG1002.EXE (size: 48972 bytes) 
                                 , and click GO!
          Open the article, and click the button to download the file.
    
    
  • Internet (anonymous FTP)

          ftp ftp.microsoft.com
          Change to the Softlib/Mslfiles folder.
          Get WG1002.EXE (size: 48972 bytes) 
    
  • Microsoft Download Service (MSDL)

          Dial (425) 936-6735 to connect to MSDL
          Download WG1002.EXE (size: 48972 bytes) 
    

For additional information about downloading, please see the following article in the Microsoft Knowledge Base:

   ARTICLE-ID: Q119591
   TITLE     : How to Obtain Microsoft Support Files from Online
               Services

  • You can have this Application Note mailed to you from the automated Microsoft FastTips Technical Library, which you can call 24 hours a day, 7 days a week at (800) 936-4200. NOTE: The FastTips Technical Library is available only to customers within the U.S. and Canada.
  • If you are unable to access the source(s) listed above, you can have this Application Note mailed to you by calling Microsoft Product Support Services Monday through Friday, 6:00 A.M. to 6:00 P.M. Pacific time at (425) 637-7098. If you are outside the United States, contact the Microsoft subsidiary for your area.


  • KBCategory: kbother kbfile kbappnote
    KBSubcategory: wfw
    Additional reference words: appnote 3.1 3.10 WFWG appnote
    Keywords : wfw kbappnote kbfile kbother
    Version : 3.11
    Platform : WINDOWS


    THE INFORMATION PROVIDED IN THE MICROSOFT KNOWLEDGE BASE IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND. MICROSOFT DISCLAIMS ALL WARRANTIES, EITHER EXPRESS OR IMPLIED, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL MICROSOFT CORPORATION OR ITS SUPPLIERS BE LIABLE FOR ANY DAMAGES WHATSOEVER INCLUDING DIRECT, INDIRECT, INCIDENTAL, CONSEQUENTIAL, LOSS OF BUSINESS PROFITS OR SPECIAL DAMAGES, EVEN IF MICROSOFT CORPORATION OR ITS SUPPLIERS HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF LIABILITY FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES SO THE FOREGOING LIMITATION MAY NOT APPLY.

    Last reviewed: May 1, 1997
    © 1998 Microsoft Corporation. All rights reserved. Terms of Use.