The information in this article applies to:
- Microsoft Windows operating system versions 3.0, 3.0a, 3.1, 3.11
- Microsoft Windows for Workgroups versions 3.1, 3.11
SUMMARY
You may want to use the Terminal program included with Microsoft Windows
versions 3.0 and 3.1 and Windows for Workgroups versions 3.1 and 3.11 to
communicate between two stand-alone MS-DOS-based machines.
To do this, you must set your modem for auto-answer, which usually requires
that your modem have auto-answering capability. If it does not hve this
capability, you must manually enter the string "ATA" (without the quotation
marks) when you receive a call before the modem can answer.
Terminal version 3.0 in Windows 3.0 has the ability to answer the phone
automatically by setting the Answer string in the Modem Setting dialog box.
Modem Settings can be selected from the Settings menu.
The Answer edit field has been removed from the Modem Commands dialog box
in Terminal 3.1, which is included with Windows 3.1 and Windows for
Workgroups 3.1 and 3.11. However, the functionality has not been removed.
MORE INFORMATION
Windows 3.1 and Windows for Workgroups 3.1, 3.11
To configure Terminal to answer with Windows 3.1 or Windows for Workgroups
3.1 and 3.11, use one of the following methods:
Method 1:
- Start Terminal.
- At the prompt, type the following, which is considered the "answer
command":
ATQ1E0S0=1
-or-
ATS0=1
NOTE: The "answer command" may vary depending on the command set that
your modem uses. Check the documentation included with your modem for
information on the correct "answer command." Note that both commands
above end with a zero (0), not the letter "o."
With this method, you must manually enter the "answer command" every time
you start Terminal and want the modem to answer automatically.
Method 2:
To save the above manual step, set the "answer command" in the Originate
modem command control box.
- Choose Modem Commands from the Settings menu.
- Type the "answer command"; for example, "ATQ1E0S0=1" (without the
quotation marks) in the Originate control box.
- Save this setting as a specific .TRM file, for example, ANSWER.TRM.
- Choose Dial from the Phone menu, then choose OK. You do not have to
actually enter a number to be dialed. The Dial dialog box will
disappear, but the Originate string is changed.
Originate is a set of commands sent to the modem when Terminal is started.
This is why you can use the Originate setting to answer an incoming call.
When you start Terminal under Windows 3.1 with the default settings for
Originate, you are in the standard configuration. To make use of the
Originate string and the auto-answering feature, you must open the
ANSWER.TRM file that was saved previously. Another option is to set up the
Terminal icon to automatically open the ANSWER.TRM file as follows:
- Select the Terminal icon.
- From the File menu in Program Manager, choose Properties.
- On the Command Line, add the name of the file you want Terminal to
open automatically. The Command Line should appear similar to the
following:
c:\windows\terminal.exe answer.trm
Method 3:
Set up a function key that when pressed enters the "answer command":
- From the Settings menu, choose Function Keys.
- For Key Name, enter "Auto-answer" (without the quotation marks).
- For Command, enter the "answer command," for example:
ATQ1E0S0=1
- Be sure the check box for Keys Visible is selected, then choose OK.
You should then be able to see the newly created function key at the
bottom of the Terminal display window.
- To save the function key, choose Save from the File menu, and type a
filename (for example, you could save it as ANSWER2.TRM).
Windows 3.0
With Hayes or other compatible smart modems, the settings are controlled
through software switches. Although Terminal doesn't provide an easy way to
set the modem to auto-answer, you have the following three options:
- Run the software that came with your modem to configure the modem
to auto-answer.
-or-
- Type "ATA" (without the quotation marks) when the phone rings.
-or-
- From the Settings menu, choose Modem Commands. In the Originate
field, make the string equal to 1 instead of 0. Choose OK and dial
any number. This triggers the modem to auto-answer. Once the modem is
set to auto-answer, reset the Originate field to 0. A subsequent call to
your computer causes Terminal to detect a carrier and make a connection.
Note that you can record a macro with Recorder and automate this
procedure.