Missing MS At Work PC Fax Address Option in WFWG 3.11 MailLast reviewed: November 22, 1994Article ID: Q114336 |
The information in this article applies to:
SYMPTOMSWhen you try to create a new address entry in the Windows for Workgroups 3.11 Mail program, the Microsoft At Work PC Fax address option is missing. NOTE: Even when this option is missing, you should not encounter any problems receiving or sending faxes.
CAUSEThis situation can be caused by a missing FAXNSP entry in the MSMAIL.INI file or a corrupted FAXNSP.DLL file in the Windows SYSTEM subdirectory.
RESOLUTIONEdit the MSMAIL.INI file located in the Windows directory and verify that the NAME= entry under the [Providers] section contains Faxnsp. Below is an example of how this section should look.
[Providers] Name=Pabnsp MSSFS FaxnspIf the [Providers] section appears to be correct, it is possible that FAXNSP.DLL is corrupted. Expand a new FAXNSP.DLL from Disk 6 (of the 3.5- inch set) or Disk 8 (of the 5.25-inch set) of Windows for Workgroups 3.11. For example, to expand a new copy of the file from a disk located in the A drive to a Windows directory located on the drive C, you would use the following:
expand a:\faxnsp.dl_ c:\windows\system\faxnsp.dll |
KBCategory: kbtool kbatwork kbinterop
© 1998 Microsoft Corporation. All rights reserved. Terms of Use. |