WIN /D:T Disables Printing and Communications in WFWG 3.11

Last reviewed: November 21, 1994
Article ID: Q121090
The information in this article applies to:
  • Microsoft Windows for Workgroups version 3.11

SUMMARY

When you start Windows for Workgroups with the command WIN /D:T and you try to print or use a communications (COM) port, you receive the following error message:

   LPT1 is being used by another application.
   When the application is finished with the port, resume printing.

MORE INFORMATION

You may need to start Windows for Workgroups with the /D:T switch as part of standard troubleshooting. Doing so disables all printing and communications until Windows for Workgroups is restarted normally.

Under normal circumstances, the communications driver (COMM.DRV) calls VCOMM.386 to determine the appropriate port and parameters to print or communicate to. The /D:T switch prevents all *.386 files from loading. Therefore, when COMM.DRV attempts to call VCOMM.386 to begin printing, the driver is not loaded into memory, further printing and communications port use is impossible, and the error message is displayed.

This behavior is by design; the /D:T switch is included for troubleshooting purposes only.


KBCategory: kbusage kberrmsg kbtshoot
KBSubcategory: wfw wfwg wincomm
Additional reference words: tshoot 3.11 com1 com2


THE INFORMATION PROVIDED IN THE MICROSOFT KNOWLEDGE BASE IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND. MICROSOFT DISCLAIMS ALL WARRANTIES, EITHER EXPRESS OR IMPLIED, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL MICROSOFT CORPORATION OR ITS SUPPLIERS BE LIABLE FOR ANY DAMAGES WHATSOEVER INCLUDING DIRECT, INDIRECT, INCIDENTAL, CONSEQUENTIAL, LOSS OF BUSINESS PROFITS OR SPECIAL DAMAGES, EVEN IF MICROSOFT CORPORATION OR ITS SUPPLIERS HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF LIABILITY FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES SO THE FOREGOING LIMITATION MAY NOT APPLY.

Last reviewed: November 21, 1994
© 1998 Microsoft Corporation. All rights reserved. Terms of Use.