Cannot Log On to Domain Using Xircom Adapter in WFWG

Last reviewed: May 11, 1995
Article ID: Q125513

The information in this article applies to:

Microsoft Windows for Workgroups version 3.11

SYMPTOMS

When you try to log on to a domain in Windows for Workgroups 3.11 using a Xircom Pocket Ethernet III adapter, you may receive the following error message:

   The password you specified is incorrect or your account is inactive.
   See your network administrator for the password or to activate your
   account.

CAUSE

This problem can occur if you are using an older version of the Xircom adapter driver.

RESOLUTION

Obtain the latest version of the Xircom adapter driver from the Xircom BBS at (805) 376-9130. Download the file PE3309.EXE. For additional information about the latest Xircom adapter driver, contact Xircom Technical Support at (800) 874-4428.

Additional reference words: 3.11
KBCategory: kbnetwork kb3rdparty kbhw kbprb
KBSubcategory: wfwg

THE INFORMATION PROVIDED IN THE MICROSOFT KNOWLEDGE BASE IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY KIND. MICROSOFT DISCLAIMS ALL WARRANTIES, EITHER EXPRESS OR IMPLIED, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. IN NO EVENT SHALL MICROSOFT CORPORATION OR ITS SUPPLIERS BE LIABLE FOR ANY DAMAGES WHATSOEVER INCLUDING DIRECT, INDIRECT, INCIDENTAL, CONSEQUENTIAL, LOSS OF BUSINESS PROFITS OR SPECIAL DAMAGES, EVEN IF MICROSOFT CORPORATION OR ITS SUPPLIERS HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF LIABILITY FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES SO THE FOREGOING LIMITATION MAY NOT APPLY.

Last reviewed: May 11, 1995
© 1998 Microsoft Corporation. All rights reserved. Terms of Use.